What does the small bulb with an exclamation mark in the middle on the car dashboard mean?

1 Answers
MacAdalynn
07/30/25 1:11am
The small bulb with an exclamation mark in the middle on the car dashboard indicates a malfunction in the vehicle's lighting system. At this point, the driver should get out of the car and check which light is malfunctioning. The lighting system in a car includes turn signals, headlights, brake lights, fog lights, and width indicator lights, all of which are crucial for safe driving. If any of these lights malfunction, it can compromise safety. The most commonly malfunctioning lights are the brake lights and turn signals. When the driver presses the brake pedal, the brake lights illuminate, alerting drivers behind to maintain a safe distance and prevent rear-end collisions. Most brake light failures are caused by burnt-out bulbs, which can be resolved by replacing the bulb. When turning or changing lanes, the driver should activate the turn signals in advance to inform other drivers of their intention. If the turn signal flashes at an unusually fast rate, it indicates a malfunction, and the bulb should be replaced immediately.
Was this review help?
1
1
Share
More Forum Discussions

What are the hidden functions of the 2021 RAV4 remote key?

2021 RAV4 remote key hidden functions include car locating, one-touch window closing, automatic trunk opening, one-touch window opening, and manual locking. Below is an introduction to the RAV4 engine related content: 1. Country of origin: It belongs to a domestically produced engine. 2. Transmission: The RAV4 engine is equipped with a 2.0L naturally aspirated engine and a CVT continuously variable transmission. 3. Maximum power: The maximum power is 126 kilowatts. 4. Maximum speed: The maximum speed is 6,600 revolutions per minute. 5. Maximum torque speed: The maximum torque speed is between 4,400 to 5,000 revolutions per minute.
8
2
Share

What is the difference between Edge Professional and Edge?

They differ in nature. The detailed differences between Edge Professional and Edge are as follows: 1. Different nature: The product line for multi-grade oil includes Edge - Magnetec - GTX - GTX Ultra - GTX High Mileage, ranked from high to low level from left to right. On the official website, only Edge is labeled as fully synthetic oil, Magnetec is labeled as synthetic oil (commonly known as semi-synthetic oil), and the rest starting from GTX are mineral oils. 2. Different features: Edge Professional is a collaboration between Castrol and car manufacturers, not sold publicly and only used in 4S maintenance services. Castrol partners with many manufacturers, but not all Edge Professional products are of the same quality. Regular Edge, on the other hand, is available for general use. 3. Different performance: Edge incorporates a unique liquid titanium formula with an adaptive oil film capability, effectively reducing direct metal-to-metal contact under various driving conditions and naturally minimizing friction loss. Edge meets the demanding high-temperature and high-pressure requirements of modern high-performance engines. It also effectively reduces deposits, keeping the engine clean and enhancing power performance.
19
4
Share

What is the black part on top of the wiper?

The black part on top of the wiper is the windshield washer pump. Below is an introduction to wiper-related content: 1. Manual activation: Indicates manual operation. Pushing the entire wiper lever upward toward the front of the vehicle once will trigger a single wipe. 2. Variations by model: Depending on the vehicle model, the markings on the wiper stalk may differ slightly. For example, "HIGH" might also be labeled as "HI," "MIST" could be labeled as "1x," or entirely replaced by icons. Below is extended information about the INT function: 1. Abbreviation: INT stands for "interim," meaning intermittent. 2. Intermittent operation: On the wiper, it refers to intermittent operation, wiping every few seconds. The interval can be adjusted. The white blocks decrease in size from top to bottom. Below INT, there is an arrow. Rotating the dotted circle around INT will align the arrow with the white blocks, with the interval increasing from top to bottom.
9
4
Share

Why does the car's automatic door lock keep jumping?

If the car's automatic door lock keeps jumping, first check if the door is properly closed. Additionally, interference with the door sensor can also cause this phenomenon. Here is some extended information: 1. Function: The purpose of the automatic door lock is anti-theft. It quickly locks after driving to prevent door-pulling robberies during traffic jams or at red lights, providing a certain level of security. 2. Automatic door power grounding or brake light power line damage: Generally, after starting to drive, stepping on the first brake will automatically lock the doors to prevent passengers from accidentally opening the door and falling out. Many cars now have this design, especially family cars. When the car is stopped in P gear or turned off, the automatic door lock opens for easy exit. If the automatic door lock jumps randomly while driving, it indicates that the automatic door power is grounded or the brake light power line is damaged. It is recommended to visit a repair shop to troubleshoot the issue.
9
5
Share

What to Do When There's Abnormal Noise During Braking While Turning but Not When Going Straight?

You can check if there are any foreign objects or bulges on the tires. Bulges on the tires or embedded stones or nails can cause abnormal noises at very low speeds. At high speeds, the noise may still be present, but it becomes less noticeable due to the high frequency. Check if the ball joints of the steering tie rods are loose. Loose ball joints can produce noise when turning to one side, and a mechanic should be able to diagnose this. However, note that manually pulling to check might not be effective, as if the ball joint is loose enough to be moved by hand, it's already too loose. Use a pry bar to apply some force and check. It's best to perform this operation on a lift for safety.
12
1
Share

Does the 2021 3 Series have a particulate filter?

2021 3 Series has a particulate filter, which is a ceramic filter installed in the diesel engine emission system to capture particulate emissions before they enter the atmosphere. Function of the particulate filter: The particulate filter can reduce soot produced by diesel engines by more than 90%, and the captured particulate emissions are subsequently burned off during vehicle operation. Principle of the particulate filter: The diesel particulate filter is coated with metals such as platinum, rhodium, and palladium. The black smoke containing carbon particles emitted by the diesel engine enters the engine exhaust particulate trap through a dedicated pipe. After passing through its densely arranged bag-type filter, the carbon smoke particles are adsorbed on the filter made of metal fiber felt. When the adsorption of particles reaches a certain level, the burner at the end automatically ignites and burns, turning the adsorbed carbon smoke particles into harmless carbon dioxide that is then discharged.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.