What does the simulated study hours for Subject 2 mean?

1 Answers
LeGrant
07/30/25 9:04am
Simulated study hours for Subject 2 refer to the minimum number of study hours that must be completed before taking the driving test. Below is additional information: 1. Subject 2: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment. It is the abbreviation for the field driving skills test. For small vehicles C1 and C2, the test items include five mandatory components: reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves. 2. Test precautions: During the preparation phase before getting into the car, it is essential to adjust the seat and fasten the seatbelt before verifying the fingerprint. Before proceeding to the next test item, always confirm whether there is another vehicle ahead taking the test. If a vehicle is currently being tested in the next item, you must stop and wait before the yellow line of that item and must not enter.
Was this review help?
17
2
Share
More Forum Discussions

Does Steering Gear Noise Require Replacing the Entire Assembly?

Steering gear noise does not necessarily require replacing the entire assembly. There are many potential causes for steering gear noise, and vehicle owners should visit a repair shop for inspection to identify the specific issue before proceeding with repairs. If the issue is a faulty clockspring, and the sound is coming from inside the steering wheel, this is often caused by interference from the clockspring inside the steering wheel. The solution is to remove the steering wheel clockspring, apply some grease, and check if the noise persists. If it does, the clockspring should be replaced. When there is noise during steering wheel rotation, if the sound appears to come from below the steering wheel, check for friction between the steering column and the floor mat. Sometimes, aftermarket floor mats may be too large and come into direct contact with the steering column, causing friction as the column rotates. If lubrication is insufficient, this can lead to noise. In such cases, applying some lubricant should resolve the issue.
17
5
Share

Where is the fuse box of Audi Q5?

Audi Q5 has a total of 3 fuse box locations, namely the left front door side and the right front door side. You need to open the door and use a flat-head screwdriver to pry open the dashboard side panel to see it. The Audi Q5 perfectly combines the body design of a sports car, efficient power and sensitive handling, the off-road safety performance of an SUV, and the excellent comfort and flexible interior space of a station wagon, inheriting many of the advantages of the third-generation top SUV Audi Q7. In terms of body size, the Audi Q5 has a length, width, and height of 4629mm, 1898mm, and 1655mm respectively.
12
4
Share

What does sync mean on a car?

Sync on a car refers to the synchronization button of a dual-zone automatic air conditioning system. When the button light is on, the temperature from the air vents on both sides of the car is the same and adjusts synchronously. This means that when you adjust the temperature on one side, both air vents actually maintain the same temperature. A dual-zone automatic air conditioning system has two temperature zones, allowing independent temperature adjustments for the left and right sides of the front cabin. Vehicles equipped with dual-zone automatic air conditioning can meet the different temperature requirements of passengers in two separate positions inside the car, as the independent zones allow for flexible adjustment between different temperature settings.
4
1
Share

What is the correct driving posture?

Correct driving posture: Adjust the front and rear position of the seat; Adjust the backrest angle; Adjust the headrest height; Adjust the steering wheel position; Adjust the seat belt position; Adjust the mirror system. The first thing to do after getting into the driver's seat is to adjust the position of the driver's seat. Remember that the basic position of the seat should not be too far forward (leaning over the steering wheel) or too far back (lying in the seat), as both are unsafe. Being too far forward may cause injury when the front airbag deploys during an accident, while being too far back may obstruct vision and make it difficult to control the steering wheel accurately. The ideal seat angle is about 8 degrees from vertical, but this may vary depending on the individual.
15
0
Share

Why does the fan keep running after the car key is pulled out?

It is normal for the fan to keep running after the car key is pulled out, and there is no need to worry. It usually stops after a few minutes. The fan is the cooling fan, whose main function is to blow air for cooling. This means that as long as the temperature is high, the fan will operate. There is a sensor on the side of the engine compartment. When the engine temperature is higher than the set value, the fan will start working. When the engine temperature drops below the set value, the fan will automatically stop. Pulling out the key only cuts off the power to the vehicle's electrical appliances, but it does not mean that all the circuits in the car are powered off. For example, the car's anti-theft device is directly connected to the car battery. The fan is not controlled by the key; the cooling fan is directly connected to the battery. Therefore, as long as the battery has power and the engine temperature is high, the fan will continue to run until the temperature drops.
4
2
Share

What is the process of car replacement?

The process of car replacement is: 1. Evaluate and price the old car, and the sales consultant will accompany you to select and order a new car; 2. Sign the old car purchase and sale agreement and the replacement agreement; 3. The money from the old car replacement will directly offset the price of the new car. After the owner makes up the difference for the new car, the car pickup procedures will be completed. If the owner needs a loan to purchase the new car, the money from the old car replacement will serve as the down payment for the new car, and the car loan procedures will be completed; 4. Complete the old car transfer procedures, with the owner providing necessary assistance and materials. Car replacement refers to consumers using their second-hand car to replace a new car or a different model of old car, combining the processes of selling the old car and buying a new car into one process.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.