What does the set button mean in Volkswagen cars?

2 Answers
Ramirez
07/24/25 1:22pm
Volkswagen's set button is a speed setting switch that can store the current vehicle speed and automatically maintain this speed. When speed control is no longer needed, simply pressing the brake pedal will immediately stop the speed setting function, but the speed information will continue to be stored. Below is a relevant introduction about the Volkswagen blue light set button: The Volkswagen blue light set button is for tire pressure monitoring reset. When a yellow exclamation mark (i.e., the tire pressure warning indicator) appears on the dashboard, it indicates an issue with the vehicle's tire pressure. After inspection confirms no problem or after repairing the tire, you can press and hold the SET button to clear the fault code.
Was this review help?
11
2
Share
EmmanuelAnn
08/11/25 7:25am
The SET button on Volkswagen cars? It refers to the function of setting the cruise control speed. When you're driving on the highway, for example, maintaining a steady speed of 90 kilometers per hour, pressing the SET button will make the car remember this speed and continue automatically without needing to press the accelerator. The SET button is commonly located on the steering wheel, and it's as simple as pressing it to operate. I remember the first time I used it, I was worried the car might go out of control, but later I found it to be quite intelligent: the car will accelerate uphill and decelerate downhill to maintain the set speed, making it very safe. Using SET on long trips can save a lot of effort, preventing leg fatigue and making driving more comfortable. However, it's important to choose the right setting—only use it on open highways or national roads, not in urban areas with many traffic lights or complex traffic conditions. Pressing the brake immediately cancels the cruise control, returning to manual control. It's recommended for beginners to try it at low speeds first to get familiar with it.
Was this review help?
19
5
Share
Expand All
More Forum Discussions

What are the dimensions of the Buick LaCrosse?

The dimensions of the Buick LaCrosse are 5026mm in length, 1866mm in width, and 1462mm in height, with a wheelbase of 2807mm, classifying it as a mid-size sedan. Standard features include a power sunroof, power-adjustable leather seats, a 6-disc CD + DVD entertainment system, cruise control, and a dual-zone automatic climate control system with rear air vents. In terms of powertrain, the Buick LaCrosse is equipped with a 2.0-liter turbocharged engine across all trims, delivering a maximum horsepower of 241 hp and complying with the China VI emission standards. For transmission, the Buick LaCrosse uses a 9-speed automatic transmission with manual shift mode. The front suspension is a MacPherson strut independent suspension, while the rear suspension is a multi-link independent suspension.
2
0
Share

Should You Buy Car Seat Covers?

Purchasing car seat covers is not necessary and mainly depends on personal preference. Seat covers can reduce wear and tear, extending the lifespan of the original seats. Some car owners buy them for aesthetic reasons, especially if the original seats are fabric, which tends to get dirty easily. Other passengers might accidentally stain or damage the seats, so many owners purchase covers for added benefits like keeping warm in winter and cool in summer, as well as easy cleaning. Most new car seats, especially those made of full leather, are already very comfortable, smooth, and durable. Many seat covers on the market do not fit perfectly and are not fully enclosed. If car owners want to experience the quality of their new car seats, they may choose not to buy seat covers.
2
0
Share

What is the difference between the Cayman and the Boxster?

The main differences between the Boxster and the Cayman are their appearance and positioning. Below are the specific distinctions between the two: Appearance differences: The Cayman does not have a soft top or convertible option. While the two share some similarities in design, overall the Boxster is considered more attractive and carries hints of the 911. Both the Boxster and Cayman have standard versions. Different vehicle positioning: The Boxster lacks a hard top or hard roof, while the Cayman can be seen as the hardtop version of the Boxster, but it is positioned above the Boxster. Both base models use the same engine—a horizontally opposed 6-cylinder 2.7-liter engine—though the Cayman has undergone some tuning for slightly improved performance.
8
4
Share

What are the requirements for setting up a circular fire lane?

Circular fire lanes should meet the following requirements: 1. The clear width and height of the lane should not be less than 4.0m; 2. The turning radius should meet the requirements for fire truck turning; 3. No obstacles such as trees or overhead pipelines that hinder fire truck operations should be placed between the fire lane and the building; 4. The edge of the fire lane adjacent to the building's exterior wall should preferably be no less than 5m from the building's exterior wall; 5. The slope of the fire lane should not exceed 8%; 6. The circular fire lane should have at least two connections with other lanes; 7. The pavement of the fire lane, rescue operation areas, and the pipelines and culverts beneath the fire lane and rescue operation areas should be able to withstand the pressure of heavy fire trucks.
2
0
Share

How to Check the Oil Dipstick on a Passat?

The method for checking the oil dipstick on a Passat is as follows: When pulling out the dipstick from the engine, there are two circles at the lower end of the dipstick, which represent the upper and lower limits of the oil level. Simply ensure that the measured oil level falls between these two marks. In vehicles, the dipstick is a commonly used tool for checking the quantity of lubricating oil. Due to the curved path of the dipstick insertion hole, the dipstick must be able to deform when inserted and rebound to its original shape when pulled out. The Passat is a mid-size sedan designed by Volkswagen AG in Germany, with body dimensions of 4933mm in length, 1836mm in width, 1469mm in height, and a wheelbase of 2871mm.
4
2
Share

What is the reason for continuous oil leakage from the carburetor drain port?

The reasons for continuous oil leakage from the carburetor drain port: 1. The fuel inlet valve in the carburetor is stuck by foreign objects, preventing it from closing completely, resulting in an excessively high fuel level and oil leakage; 2. The dynamic balance system of the carburetor fuel inlet system is disrupted. Here is more information about the carburetor: 1. Hazards of oil leakage: Carburetor oil leakage not only increases fuel consumption and affects overall vehicle performance but, more importantly, poses significant safety hazards to the vehicle, requiring timely resolution. 2. Working principle: The carburetor is a mechanical device that mixes a certain proportion of gasoline with air under the vacuum generated by the engine's operation. As a precise mechanical device, the carburetor utilizes the kinetic energy of the incoming airflow to achieve gasoline atomization.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.