···
Log in / Register

What does the sawtooth pattern on highways represent?

4 Answers
KaiLynn
07/29/25 3:23pm

Highway sawtooth markings indicate variable lanes. Below are important safety precautions for highway driving: 1. Stay informed about road conditions. Before traveling, it's crucial to obtain up-to-date traffic information. If TV and radio reports aren't timely enough, you can call highway information hotlines. This is particularly important during foggy seasons - verify conditions in advance to avoid unnecessary detours or exits. 2. Avoid fatigued driving. Highways' enclosed environments encourage higher speeds, requiring prolonged concentration. The fixed driving posture and monotonous operations can easily cause both mental and physical fatigue. Poor weather conditions further increase accident risks. Therefore, drivers should take breaks approximately every 2 hours to maintain alertness. 3. Never speed. Speeding is a major cause of traffic accidents. During adverse weather, drivers must strictly adhere to speed limits, refrain from aggressive driving or right-side overtaking to ensure everyone's safety and property protection.

Was this review help?
12
3
Share
AdalineAnn
08/14/25 8:11am

Experiencing a sawtooth-like vibration when driving on the highway is actually quite common. This often indicates uneven tire wear, such as the front tires wearing out faster than the rear ones, or the tire surface becoming uneven due to frequent hard braking and acceleration. At high speeds, the rapid rotation of the tires causes the unevenly worn parts to produce that clicking, sawtooth-like vibration. I’ve personally experienced this—prolonged driving not only makes the steering wheel shake to the point of numbing your hands but can also damage the rims and suspension system. For safety, it’s recommended to regularly check the tread depth of your tires. If you notice obvious unevenness, replace the tires immediately or get a wheel balance. Don’t delay, as worsening vibrations can lead to loss of control at high speeds, which is a significant risk.

Was this review help?
6
5
Share
Expand All
SanKing
10/11/25 8:13am

Having driven for over a decade, I'm quite familiar with this high-speed jagged vibration. It usually indicates potential tire issues, primarily caused by uneven wear or inconsistent air pressure. During prolonged sharp turns or heavy loads, tire surfaces can easily chunk or peel, creating a sawtooth-like effect on highways. This not only compromises ride comfort but also accelerates axle wear. I recommend visually inspecting your tires during each refueling—address any abnormalities promptly. If you rarely drive on highways, it might be less urgent, but for frequent high-speed commuters, this demands attention: keep a tire pressure gauge handy, test before monthly inflation, and ensure even pressure across all tires for stable driving.

Was this review help?
6
1
Share
Expand All
DeMaverick
11/25/25 2:32am

The car vibrates in a jagged manner at high speeds, which in my opinion directly points to a tire issue. It's commonly caused by small bumps formed by irregular tread wear, creating that harsh, jagged sensation during rapid rotation. Long-term high-speed driving without tire replacement leads to reduced tire grip, especially making the car more prone to skidding on wet roads during rain. Regular maintenance should include checking tire rotation records; if uneven wear is detected, perform a four-wheel rotation or adjust tire pressure to prevent further deterioration. This is crucial for driving safety.

Was this review help?
1
0
Share
Expand All
More Forum Discussions

How are sedan grades classified?

Sedan grades are classified as follows: 1. Class A cars, also known as compact cars, with even smaller cars referred to as subcompact cars, or Class A0 cars, typically featuring a wheelbase of around 2.4 to 2.6 meters and engine displacements mostly ranging from 1.0 to 1.5 liters; 2. Class B cars, known as midsize cars, with wheelbases approximately between 2.7 to 2.9 meters and engine displacements around 1.4 to 2.5 liters; 3. Class C cars, referred to as full-size cars, with wheelbases around 3 meters and engine displacements ranging from 2.0 to 3.0 liters. Common Class C models include the Audi A6, BMW 5 Series, and Mercedes-Benz E-Class; 4. Class D cars, also called large luxury cars, with wheelbases varying from 3.1 to 3.6 meters and engine displacements from 2.0 to 6.6 liters. Representative models include the Mercedes-Benz S-Class, BMW 7 Series, Audi A8, Bentley, and Rolls-Royce.
4
5
Share

Is WD-40 corrosive?

WD-40 is not corrosive. Here are the functions of WD-40: 1. Penetration and rust removal: WD-40 has excellent penetration ability, which can penetrate into the metal surface and the interior of capillary pores. It also has excellent solubility for corrosion deposits such as rust particles, which can break the bonding between particles and make deposits such as rust fall off easily. 2. Lubrication: WD-40 can be evenly distributed on the surface of metal parts and penetrate into tight metal friction pairs. 3. Electrical conductivity: It can eliminate the film or impurities caused by oxidation on the contacts of electrical equipment, promoting smooth current and stable voltage.
6
0
Share

What is the reason why the Envision does not move when stepping on the accelerator uphill?

The reason why the Envision does not move when stepping on the accelerator uphill is clutch slippage. The following are specific details about the related content: 1. Manifestation: Clutch slippage mainly manifests as the vehicle speed not increasing with the rise in engine RPM during acceleration while driving. The engine's power cannot be fully transmitted to the drive wheels, resulting in weak driving force, especially noticeable when going uphill. 2. Cause: The main reasons for clutch slippage are insufficient friction of the clutch friction plate; shifting gears prematurely or disengaging before the clutch is fully engaged; prolonged driving with the clutch partially engaged or coasting with the clutch pedal depressed; and abnormal wear of the clutch plate caused by abruptly stepping on the accelerator when the gear is not fully engaged or disengaged.
1
3
Share

How to Repair Leakage Caused by Aging Sunroof Seals?

When the sunroof seals age and cause leakage, they need to be replaced. Remove both the front and rear sunroof glass panels, then adhere the new seals along the perimeter edges of the vehicle. Detailed causes and solutions for sunroof leakage are as follows: 1. Abnormal sealing strips: The sealing strips are primarily responsible for preventing water from entering the sunroof. If the seals age and allow excessive rainwater into the sunroof, beyond what the drainage tubes can handle, it will leak into the cabin. Check the sealing strips for damage by pinching them to see if they show signs of aging. Solution: Have them replaced at a repair shop. 2. Gaps in the sunroof frame: When there are gaps in the frame, leakage during rain can be severe, even causing water to drip inside the cabin. Solution: Apply sealant or replace the entire frame or sunroof.
7
4
Share

How many days of repair at a 4S shop require the provision of a replacement vehicle?

4S shops are required to provide a replacement vehicle if the repair takes more than 7 days. The following are the car maintenance and repair items: 1. Air filter: The engine inhales a large amount of air during operation. If the air is not filtered, the dust in it will accelerate the wear of the piston group and cylinder. Larger particles entering between the piston and cylinder can also cause severe "cylinder scoring." The function of the air filter is to remove dust and particles from the air, ensuring that sufficient and clean air enters the cylinder. 2. Gasoline filter: The function of the gasoline filter is to provide clean fuel to the engine, filtering out water and impurities in the gasoline. This optimizes engine performance and provides the best protection for the engine.
14
3
Share

What is the difference between high gear and low gear in a car?

The difference between high gear and low gear in a car is essentially the principle of a large gear driving a small gear versus a small gear driving a large gear. First gear has slow rotation speed but high torque, making it suitable for climbing slopes and hauling heavy loads, which typically require low gears. On the other hand, fifth gear has low torque but high speed, making it ideal for highway driving. Specific details are as follows: 1. Speed ranges corresponding to manual transmission gears 1 to 5: Start in first gear, and when the speed reaches 15 km/h, shift to second gear; when the speed reaches 25 km/h, shift to third gear; when the speed reaches 35 km/h, shift to fourth gear; when the speed reaches 45 km/h, shift to fifth gear. 2. Gear shifting operation: Depress the clutch pedal, quickly release the accelerator, shift to the corresponding gear, and match the accelerator accordingly, or do not press the accelerator, quickly lift the clutch pedal to the semi-engaged state, and gently release the clutch pedal when the clutch is engaged.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.