What does the remote start function mean?

1 Answers
SanKatherine
07/29/25 6:34pm
Remote start function means the vehicle can be started without anyone entering the car, through remote control. The principle is: The engine is remotely started by signals sent via key fob or smartphone. Most vehicle models can be controlled through the car key, while some models also support remote control via dedicated mobile apps, which offer more controllable functions. Extended content: Introduction to remote start function: 1. Remote phone call start: No need to worry about the car being parked beyond the key fob's range. The engine and air conditioning can be started via phone call. The owner just needs to call the car with a remote command to activate the AC, achieving instant warmth in winter or coolness in summer; 2. Short-range remote start within 80 meters: Convenient for owners to operate without using phone control; 3. One-button start: Start the car with one button after entering, and turn off the engine with one button before exiting, eliminating the need to carry a key; 4. Automatic window closing: After turning off the engine and locking the car, windows close automatically (requires a dedicated window closer); 5. Fuel-saving smart function: Users can remotely preheat the vehicle 15 minutes before starting it using the key fob or smartphone. The engine turns off automatically if no one enters the car, allowing for comfortable winter driving.
Was this review help?
13
2
Share
More Forum Discussions

What is the optimal amount of battery repair fluid to add?

The optimal amount of battery repair fluid to add is 8 to 10ML. Removing the battery: For vehicles that can still run more than 20 kilometers after being fully charged, remove the battery from the vehicle and use a flat-head screwdriver to pry open the plastic cover on the upper part of the battery. Injecting the battery activator with a syringe: Take off the rubber cap cover and place it in a clean location. Use a syringe to inject nano-carbon sol battery activator and distilled water into each hole. Let it sit for 3 hours before driving: Reinstall the rubber cap cover and plastic cover plate, apply glue to the edges of the cover plate, let it sit for 3 hours, and then reinstall the battery before driving. Charge the battery with a charger after it runs out of power: Drive until the battery is depleted, then use the vehicle's charger to fully charge it. After one charge, the battery can be restored to over 90% of its original condition.
8
4
Share

Will the camera capture immediately when the traffic light turns red?

When the traffic light turns red, the camera will capture immediately as the traffic signal system and the electronic eye system work in real-time synchronization. Definition of running a red light: It refers to the behavior of motor vehicles, non-motor vehicles, pedestrians, etc., violating the traffic signal instructions by crossing the stop line and continuing to move forward when the red light is on and passage is prohibited. Front wheels crossing the line while rear wheels are still within the line when the red light turns on is not considered running a red light: When the red light turns on, if the front wheels of the car cross the line but the rear wheels are still within the line, only one signal is generated, and the likelihood of being captured is low. Front wheels crossing the line and then reversing will be judged as running a red light: If the front wheels cross the line and then reverse back within the line to avoid being captured, the camera might sense this and send another signal. Two signals will then be judged as running a red light.
17
2
Share

What are the symptoms of a leaking brake vacuum pump?

The symptoms of a leaking brake vacuum pump include poor braking performance or no braking effect at all; visible oil leakage at the external connections of the vacuum pump; and slow or non-returning brake pedal. Excessively hard brake feel: When applying the brakes, if the brake feel is noticeably too hard, with each pedal stroke being very short, or even pushing the foot back, it is likely due to a leak in the brake vacuum pump, causing the vacuum pump's assist function to fail. Abnormal noises from the vacuum pump: Poor-quality vacuum pumps may produce noticeable abnormal noises, sometimes a "click" sound, and other times a "popping" sound, but these noises do not affect the car's braking performance. Brake pedal not returning or returning slowly: If after pressing the brake pedal, the pedal neither rises nor offers resistance, this is a sign of the brake not returning. In this case, it is necessary to check whether the brake vacuum pump, master cylinder, or wheel cylinder components are damaged. Additionally, this phenomenon could also be caused by a lack of brake fluid or oil leakage.
8
2
Share

Which brand of brake fluid is good?

Some well-reputed brake fluid brands commonly found in the market include SINOPEC Great Wall Lubricant Brake Fluid, Castrol Brake Fluid, and more. Below are detailed introductions: 1. SINOPEC Great Wall Lubricant Brake Fluid: A subsidiary of Sinopec, it is a well-known brand in lubricants and brake fluids, a participant in the formulation of synthetic brake fluid standards, and a comprehensive group integrating lubricant production, R&D, storage, transportation, sales, and services. 2. Castrol Brake Fluid: Castrol is a world-renowned expert in lubricants. It is a sub-brand of BP (British Petroleum). Its success is attributed to Charles Cheers Wakefield, who established the professional lubricant company Castrol in 1899 and set the company's core values as technical leadership, winning, passion and enthusiasm, and outstanding performance. These values still represent Castrol today and are the core strengths behind its success. Castrol operates lubricant production facilities in over 70 countries worldwide and has 12 technical research centers in countries such as the UK, USA, France, Germany, Italy, Japan, and Australia, ensuring that Castrol lubricants remain highly competitive products.
2
3
Share

What light indicates low windshield washer fluid?

Low windshield washer fluid is indicated by a light showing a container with two water splash symbols. Engine coolant should not be too low but can be slightly overfilled: If there's no coolant in the expansion tank when it needs to be replenished, the vehicle will experience coolant deficiency. This may lead to abnormal engine overheating, even causing cylinder scoring and engine damage. It's acceptable to slightly overfill coolant beyond the maximum line, as long as it doesn't overflow during high temperatures. Different coolants should not be mixed: The color of coolant actually represents its different chemical compositions. Mixing different types of coolant is not recommended as it may cause chemical reactions or crystallization, affecting heat dissipation. Coolant only needs replenishment, not replacement: Coolant maintenance is just an upkeep item, not a service item. Modern vehicles use long-life coolant that can last for hundreds of thousands of kilometers without issues. Generally, there's no need to replace it within 5 years - regular inspection and replenishment are sufficient.
10
1
Share

Can Automotive Urea Be Exported?

Automotive urea can be exported. Commodity inspection agencies accept inspection applications: The applicant must fill out an "Export Inspection Application Form" and provide relevant documents and materials, such as the foreign trade contract, letter of credit, and original factory inspection results. The commodity inspection agency will review these documents and, if they meet the requirements, accept the inspection application for the batch of goods. If any discrepancies are found, the applicant may be required to supplement or amend the relevant clauses. Sampling: Commodity inspection agency personnel will oversee the inspection process. Depending on the form of the goods, random sampling methods will be used to collect samples. The applicant must provide information on the storage location and assist the inspectors with the sampling process. Inspection: The inspection department may employ various technical methods, ranging from sensory evaluation to chemical and instrumental analysis, to inspect the export goods. Inspection methods include self-inspection by the commodity inspection agency, joint inspection, on-site factory inspection, and origin inspection. Issuance of certificates: The commodity inspection agency will issue an inspection certificate for goods that pass inspection or stamp a release seal on the "Export Customs Declaration Form." After obtaining the inspection certificate or release notice, the exporting company must ship the goods within the specified validity period.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.