What does the red wrench on the Chery E5 dashboard indicate?

1 Answers
LilaLynn
07/29/25 9:03pm
The red wrench appearing on the Chery E5 dashboard is a maintenance reminder symbol, alerting the driver to service the vehicle. The solutions for the red wrench warning are as follows: Engine Oil and Oil Filter Replacement: This primarily pertains to the maintenance of the lubrication system. The lubrication system's main function is to effectively lubricate various components of the car engine to prevent excessive wear. The oil filter's role is to remove impurities from the oil, ensuring the lubrication system operates normally. The oil filter should be replaced along with the oil during an oil change. Under normal circumstances, the vehicle requires maintenance every 5,000 kilometers. Air Filter Replacement: The air filter's function is to filter the air before it enters the cylinders, removing impurities such as dust, sand, and other foreign particles. The cleaning and maintenance of the air filter depend on the usage environment. The gasoline filter is typically replaced after driving 20,000 kilometers. Spark Plug Replacement: Spark plugs should be replaced every 20,000 kilometers. Components such as brake fluid fall under inspection items.
Was this review help?
5
1
Share
More Forum Discussions

What car series is the Skoda Octavia?

Skoda Octavia is the Mingrui. Taking the Mingrui 2020 TSI230 DSG Zhixing Luxury Edition as an example, it belongs to the compact car category with body dimensions of: length 4675mm, width 1814mm, height 1460mm, wheelbase 2686mm, and a fuel tank capacity of 51 liters. In terms of suspension, it features a front MacPherson strut independent suspension and a rear torsion beam non-independent suspension. For power, it is equipped with a 1.2T turbocharged engine delivering a maximum power of 85 kilowatts and a maximum torque of 200 Newton-meters, paired with a 7-speed dual-clutch transmission.
12
3
Share

Which One is the Clutch in a Manual Transmission Car?

In a manual transmission car, the leftmost pedal is the clutch. From left to right, the pedals are: clutch, brake pedal, and accelerator pedal. The clutch is located between the engine and the transmission, serving as the switch for power transmission between them. It is a transmission structure that can both transmit and cut off power. A manual transmission car refers to a vehicle that uses a manual gear-shifting mechanical transmission to regulate speed, requiring the driver to manually move the gear lever to change the gear engagement position inside the transmission, thereby altering the gear ratio to achieve speed variation. The method to start a manual transmission car is: 1. Turn on the ignition switch and start the engine; 2. Press the clutch pedal, shift the gear lever into first gear, and release the handbrake; 3. Gradually release the clutch pedal while pressing the accelerator.
14
2
Share

What are the techniques for judging abnormal noise in wheel bearings?

Wheel bearing abnormal noise judgment techniques are: When the car's bearing is damaged, the car will emit a continuous humming sound. After accelerating the car to a certain speed, let it coast in neutral gear. If the humming sound persists, it can be determined that the abnormal noise is caused by a damaged wheel bearing. Another symptom is that when the car is stationary or at low speed, if you turn the steering wheel, the car will emit a squeaking sound, and in severe cases, you can even feel vibration in the steering wheel. The main functions of wheel bearings are: 1. To bear weight and provide precise guidance for the rotation of the hub; 2. To withstand axial and radial loads.
14
3
Share

What is the fuel consumption per 100 kilometers for a 1.8T engine?

1.8T is equivalent to a 2.5L displacement, with a comprehensive fuel consumption of 6.8L per 100 kilometers. The following is relevant information about fuel consumption: Introduction to Fuel Consumption: It is a theoretical indicator for vehicles. The fuel consumption per 100 kilometers is a value measured by manufacturers in an objective environment using a dynamometer installed on the vehicle chassis, converted into speed parameters, and then calculated under specified speed conditions to determine the theoretical experimental fuel consumption data per 100 kilometers for the vehicle model. Corresponding Relationships: Widening and enlarging tires increases the friction of the tires, which is equivalent to increasing the load on the car, directly increasing the car's fuel consumption. At the same time, some car owners modify their cars with additions such as rear spoilers and body kits. Adding a rear spoiler undoubtedly increases the car's wind resistance. At low speeds, the rear spoiler does not function at all and only increases driving resistance, thereby increasing the overall load on the vehicle, which inevitably leads to higher fuel consumption.
10
4
Share

What is the correct way to use scratch wax?

The correct way to use scratch wax is: first clean the car body, then apply the scratch wax to the area with light scratches and gently wipe it. Scratch wax is a type of car wax used to repair minor scratches on the car paint surface. Its properties are similar to those of a polishing compound, and its working principle is the same as that of sandpaper, both of which involve physical action on the car paint surface. Scratch wax can quickly remove fine scratches from the car paint surface, effectively address oxidation phenomena such as whitening and fading of the paint, and also polish and maintain the car paint, improving its glossiness. If the scratches are more severe, you can first mark the surface with some abrasive material and then use scratch wax for better results.
6
3
Share

What is the fuel consumption of the Kia Sportage 2.0?

Taking the 2013 Kia Sportage 2.0L Automatic Two-Wheel Drive GL as an example, the fuel consumption of this model is 8.9 liters. Its dimensions are 4350 mm in length, 1840 mm in width, and 1730 mm in height, with a wheelbase of 2630 mm. The fuel tank capacity is 58 liters, and the body structure is a 5-door, 5-seat SUV. In terms of power, it is equipped with a 2.0-liter naturally aspirated engine with a maximum power of 104 kW and a maximum torque of 184 Nm, paired with a 4-speed automatic transmission. For the suspension, this model uses a MacPherson strut independent suspension at the front and a double-wishbone independent suspension at the rear.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.