What does the red exclamation mark on Audi A4 indicate?

2 Answers
DeZoe
07/29/25 7:20am
A red exclamation mark appearing on the Audi A4 likely indicates a brake system malfunction. In such cases, you should drive at low speed or stop to inspect the vehicle. Brake System Malfunction: The red exclamation mark is the brake system warning light. When this light illuminates, it is highly probable that there is a malfunction in the brake system. You should drive at low speed or stop to inspect the vehicle. It could also indicate that the electromechanical steering mechanism is not functioning or there is a fault in the steering column lock, in which case you should not continue driving. Tire Pressure Low Warning: If the warning is due to low tire pressure, it is recommended to check for signs of air leakage in the tires. If the tire pressure is normal, you should visit a 4S shop to inspect the tire pressure sensor.
Was this review help?
8
4
Share
MacCaden
08/13/25 12:22am
When I first started driving, I encountered a situation where the red exclamation mark warning light came on in my Audi A4. This is an emergency alert, usually indicating potential issues with the braking system, such as low brake fluid levels or excessively worn brake pads causing sensor false alarms. It could also signal insufficient oil pressure, where low oil levels affect engine operation and may even damage components in severe cases. Additionally, an overheating cooling system might trigger this light, such as a radiator leak or fan malfunction. My advice is to immediately find a safe place to pull over when you see this light—don't delay. Check the dashboard for any accompanying warning lights, like whether the temperature gauge is unusually high. For a quick self-check, refer to the car manual for corresponding error codes, but if you're inexperienced, avoid tampering and head to a professional repair shop as soon as possible for a computer diagnosis to avoid high-speed driving risks. Regular maintenance, including checking fluid levels and oil, can help prevent such unexpected incidents.
Was this review help?
2
2
Share
Expand All
More Forum Discussions

Where are Chevrolet car engines produced?

Among the currently available Chevrolet models, except for the engines of imported models such as the Camaro, Colorado, and Silverado which are produced in the United States, the engines of other models are manufactured in China. Chevrolet is an automobile brand under General Motors (GM) of the United States, established on November 3, 1911. It is an American brand primarily manufacturing sedans, sports cars, SUVs, and pickup trucks. Notes regarding car engines: 1. The engine should be cleaned approximately every 20,000 kilometers of driving; 2. It is recommended to change the engine oil and oil filter approximately every 5,000 kilometers of driving; 3. Try to avoid keeping the engine under overload operation for extended periods, as it not only increases fuel consumption but also reduces the engine's service life.
12
1
Share

What is the engine model of the Malibu XL?

The engine model of the Malibu XL is LSY, which includes a 1.3-liter three-cylinder turbocharged engine and a 2.0-liter four-cylinder turbocharged engine. The 1.3-liter version delivers a maximum horsepower of 165 hp, while the 2.0-liter version offers a maximum horsepower of 241 hp. The three-cylinder engine can enhance fuel efficiency while maintaining vehicle performance, making it a common choice for compact cars. The Malibu XL is a mid-size sedan produced by SAIC-GM Chevrolet, with dimensions of 4933mm in length, 1854mm in width, and 1472mm in height, and a wheelbase of 2829mm. It features a MacPherson strut front suspension and a multi-link independent rear suspension.
10
2
Share

How Many Years Can a Normal Private Car Be Driven?

Private cars generally have a service life of 15 years. According to the Road Traffic Law of the People's Republic of China, non-commercial vehicles have a mandatory scrapping period of 15 years, while motorcycles have a scrapping period of 10 years. Commercial vehicles require an annual mandatory inspection and have a scrapping period of 10 years. Below is an introduction to the mandatory scrapping standards for vehicles: 1. Vehicles that have reached the prescribed service life. 2. Vehicles that still fail to meet the national safety technical standards for in-use vehicles after repair and adjustment. 3. Vehicles that still fail to meet the national standards for pollutant or noise emissions for in-use vehicles after repair, adjustment, or the adoption of control technologies. 4. Vehicles that have not obtained the mandatory inspection qualification mark for three consecutive inspection cycles after the expiration of their inspection validity period.
6
2
Share

What are the body specifications and dimensions of the Fit?

The body specifications and dimensions of the Fit are as follows: length 4065 mm, width 1695 mm, height 1525 mm, with a wheelbase of 2530 mm. In terms of power, the Fit is equipped with a 1.5-liter naturally aspirated engine, model code L15B3, delivering a maximum power of 96 kW and a maximum torque of 155 Nm. The engine reaches its maximum power at 6600 rpm and maximum torque at 4600 rpm. Exterior-wise, the Fit adopts Honda's new family front-face design concept called 'solidwing,' where the front grille integrates seamlessly with the headlights, highlighting a sharp and sporty look. The side profile features a distinctive sporty blade-style double waistline design.
11
2
Share

How to reset the maintenance light on Audi S3?

Audi S3 maintenance light reset method: 1. Press and hold the button next to the odometer, turn ignition switch ON; 2. SERVICE or SERVICEIN will appear on the LCD display; 3. Release the button, press the button on the left side of the instrument panel (near the tachometer) to reset the display, and SERVICEIN10000MI will appear on the LCD; 4. Turn ignition switch to OFF position. For interior features, the Audi S3 comes with a three-spoke sport steering wheel, gray-white dashboard needles, combined with all-black interior, giving the new car's cabin a thoroughly sporty style.
16
2
Share

How many cylinders does the Sylphy engine have?

Sylphy is equipped with a four-cylinder engine. The Sylphy uses a 1.6-liter naturally aspirated four-cylinder engine with the model code HR16, delivering a maximum power of 102 kW and a maximum torque of 169 Nm. This engine features multi-point fuel injection technology and utilizes an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a CVT transmission. The Sylphy is a compact family sedan under the Nissan brand, with a wheelbase of 2,712 mm and dimensions of 4,641 mm in length, 1,815 mm in width, and 1,450 mm in height. The front suspension of the Sylphy employs a MacPherson independent suspension, while the rear suspension uses a torsion beam non-independent suspension. The torsion beam rear suspension is designed to maximize rear passenger space and trunk capacity.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.