What does the red dot on the Audi speedometer mean?

1 Answers
DiLucille
07/30/25 6:40am
The red dot on the Audi speedometer is a speed limit reminder. Meaning of the speed limit mark: On main urban roads or highways, if there is no clear road sign indicating the maximum speed limit, the speed limit is 50 km/h. In residential areas, commercial districts, and other similar locations, there are clearly marked signs at the entrances to these areas indicating a speed limit of 30 km/h, which is the so-called 30 km/h zone. This is common in German cars, such as Volkswagen and Audi, among others. This is simply a regulation under German law, and FAW-Volkswagen and SAIC Volkswagen adopted it when introducing these models. Safety precautions: In 30 km/h zones, drivers must fully consider pedestrians. If an accident occurs in such areas, the driver bears full responsibility. On roads with a speed limit of 50 km/h or higher, pedestrians should not cross the road recklessly.
Was this review help?
2
0
Share
More Forum Discussions

How to Disassemble the Heater Core of an Old Jetta?

The method for disassembling the heater core of an old Jetta mainly involves the following steps: 1. Drain the coolant from the cooling system. Remove the control panel. Separate the cable fixture on the left side of the heater assembly and remove the screws on the terminal posts. Disconnect the wiring connector behind the blower motor. 2. Disconnect the vacuum tube and the lighting wire behind the heater control unit. Place a container under the heater assembly's water supply pipe at the back of the cylinder head, beneath the engine. Disconnect the heater assembly's water supply pipe at the back of the cylinder head. Disconnect the heater assembly's return hose on the thermostat housing, insert the foot pump hose into the heater assembly's return pipe, push the coolant from the water supply pipe into the container, and blow out any remaining coolant from the heater assembly. Remove the two connecting bolts, then separate the return pipe. 3. Pull out the right air pipe below the return pipe on the heater assembly. Remove the two bolts on the other side and separate the water supply pipe from the flange joint. Pull out the air pipe below the water supply pipe on the left side of the heater assembly. Remove the water supply pipe's fixing bracket on the left side of the firewall. Loosen the mounting bracket nut under the water supply pipe bracket. 4. Loosen the right mounting bracket nut under the return pipe. Remove the two mounting nuts at the top of the heater assembly. Disconnect the control wire for the blower motor switch. Disconnect the control wire on the main damper flap on the side of the heater assembly. Separate the heater assembly from the mounting studs, then lift it upwards and remove it from the vehicle. 5. Reassemble in the reverse order of disassembly.
3
4
Share

What is the optimal mileage for the first maintenance of the Octavia?

The first maintenance for the Skoda Octavia should be performed at six months or 5,000 kilometers, whichever comes first. Even if the mileage hasn't reached 5,000 kilometers, the lubricating efficiency of the engine oil decreases after six months of oxidation, so it must be replaced. The relationship between engine speed and vehicle speed: Engine speed and vehicle speed do not correspond one-to-one, but generally, the faster the engine speed, the faster the vehicle speed. This is because there is also a transmission in between, more precisely, it depends on the gear ratio of the transmission. For example, at the same engine speed, different gears will result in different vehicle speeds. A faster vehicle speed necessarily means a faster engine speed, but a faster engine speed does not necessarily mean a faster vehicle speed. Recommended speed range: Try to use the available speed range. If the speed limit is 6,000 rpm, aim to use the range between 3,000 rpm and 6,000 rpm, shift gears frequently, and drive at variable speeds (e.g., on winding mountain roads or highways with smooth traffic but requiring frequent acceleration and deceleration).
12
1
Share

Can I drive in summer without turning on the AC in the car?

Driving in summer without turning on the AC in the car is not advisable. The cooling function of the car air conditioning will not activate unless the AC button is pressed. Working Principle: When the AC button is pressed for cooling, the compressor clutch engages, and the engine drives the compressor to operate. The compressor then continuously compresses the refrigerant and delivers it to the evaporator. Purpose of Air Conditioning: Car air conditioning is used to regulate and control the temperature, humidity, air cleanliness, and airflow inside the vehicle cabin to a comfortable level. It provides a pleasant environment for passengers, reduces travel fatigue, creates favorable working conditions for the driver, and plays a crucial role in ensuring safe driving.
15
2
Share

Does the Lavida Luxury Edition not have trajectory lines in the reversing camera?

Lavida Luxury Edition reversing camera does have trajectory lines. Car dash cam: The working principle of a car dash cam is to digitally record and cyclically update the road conditions in front of, inside, and around the vehicle. The recorded data includes in-car audio, vehicle acceleration, steering, and braking, which can be used for investigating traffic accident liabilities. Car reversing camera: A car reversing camera is a vehicle system. This newly developed reversing assist system is intuitive and clear, providing great convenience to drivers. The reversing footage can be retrieved. Similar to a car dash cam, the car reversing camera can also playback recorded images.
17
0
Share

Where is the hazard warning light of Baojun e300?

The hazard warning light of Baojun e300 is located on the red double-layered triangle on the roof. The hazard warning light is a danger indicator light. Brake system malfunction: The red exclamation mark is the brake system malfunction indicator. When this light is on, it is highly likely that the brake system has malfunctioned. At this time, you should drive at a low speed or stop to check. It may be that the electric power steering system is not working or the steering column lock has malfunctioned, and you should not continue driving. Tire pressure too low alarm: If the alarm is caused by low tire pressure, it is recommended to check whether there are signs of air leakage in the tires. If the tire pressure is normal, you should go to the store to check the tire pressure sensor.
17
0
Share

Which version of Xiali uses a Toyota engine?

Xiali's new model N5 is equipped with an older Toyota engine that has performance superior to the 8A. Engine usage precautions: After the engine operates at full load, it must idle for 3 to 5 minutes before shutting down. This allows sufficient cooling for the pistons, cylinders, bearings, and turbocharger components. Fuel must be clean: High impurity content in fuel can accelerate the wear of the electric fuel pump and reduce its service life. Additionally, unclean fuel can lead to clogging of the fuel filter and fuel injectors, affecting fuel supply pressure and normal injection volume, thereby reducing the engine's performance.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.