What does the 'rear' button on the Baojun 730 mean?

1 Answers
Joyce
07/29/25 2:54pm
Rear means the rear or back part. In automotive terms, this button generally represents adjusting functions related to the rear of the vehicle. Since it's an interior control, this button typically serves as the rear windshield defogger. More relevant information is as follows: 1. Function: The button on the car dashboard is primarily used to remove fog from the rear windshield. When driving, if you need to check the rear windshield to observe vehicles behind you, press this button to eliminate fog on the windshield. 2. Heating wires: In models equipped with rear windshield defogging devices, there are thin copper wires embedded in the rear windshield - these are the heating wires. By pressing the rear button, the rear windshield heating wires are activated for defogging. Normally, the rear defogger will automatically turn off after about ten minutes to protect these heating elements.
Was this review help?
13
0
Share
More Forum Discussions

How to Deal with Leaking Air Conditioner Valve Core in Cars?

Here are the solutions for a leaking valve core in car air conditioners: 1. Carbon deposits or burns between the valve and valve seat: The remedy involves removing carbon deposits and performing grinding. For severe cases, it's necessary to resurface the valve and repair the valve seat before grinding. 2. Incorrect clearance between the valve and valve guide: Excessive clearance causes the valve to wobble, leading to misalignment and poor sealing when closing; insufficient clearance results in the valve sticking in the guide, preventing proper closure. In such cases, identify the cause of the abnormal clearance and replace the affected guide or valve. 3. Insufficient or broken valve spring tension: This prevents the valve from closing properly. The solution is to replace the valve spring. Additionally, if components like the valve stem have no room for thermal expansion, they may not seal properly. Adjust the valve clearance as required.
7
4
Share

How to judge whether you can reverse into the parking space?

Straighten the steering wheel before the midpoint of the rear of the car aligns with the midpoint of the bottom of the garage. The midpoint of the rear of the car has aligned with the midpoint of the bottom of the garage, but the steering wheel has not been straightened yet. If you find the rear of the car slowly deviating to one side, it proves that the steering wheel has not been straightened.
2
4
Share

What to Do If Your License Plate Washed Away in Heavy Rain?

Carry the vehicle owner's ID card and other documents for the traffic police to trace the vehicle number. Pry off the remaining license plate, then fill out two forms and submit them along with the plate at the license plate replacement window. Receive a temporary vehicle license plate and replacement procedures. Before the temporary plate expires, visit the DMV with it to collect a new set of replacement license plates.
9
2
Share

How to Adjust the Front and Back Position of Volkswagen Car Seats?

First, adjust the distance between the seat and the pedals. When pressing the brake pedal all the way down with your right foot, ensure that your knee has a bend of approximately 120 degrees. Adjust the seat back to ensure that the angle between your body and legs is greater than 90 degrees, with your shoulders firmly against the seat.
9
5
Share

What is the car starting voltage?

12V vehicle systems should have a voltage between 13.5-14.5, while 24V vehicle systems should be between 27V-29V. Below is an introduction to the relevant content: 1. 12V vehicle systems: The battery voltage should be around 13V when unloaded, and no less than 11V under load to be considered normal. If it's lower than this voltage, starting may be difficult. For 24V vehicle systems, the battery voltage should be around 26V when unloaded, and no less than 22V under load to be considered normal. If it's lower than this voltage, starting may be difficult. 2. Engine voltage: After starting the car, the voltage should generally be between 13.4V-14.8V. If it's below 13.4V, the battery may not be charging properly, so check the engine or other electrical loads. When the voltage exceeds 14.8V, it may damage the battery, so check the engine stabilizer.
6
3
Share

What Are the 13 Hidden Functions of the Camry?

The 13 hidden functions of the Camry are: auto-dimming rearview mirror when reversing, parking ventilation and heating system, seat belt alarm, tire pressure monitoring, modified automatic headlight switch, RS startup screen, daytime running lights, lock sound, eco-driving mode, background lighting, LED brightness adjustment, and high-speed braking double flash. Below are specific details about the Camry: Exterior: The new Camry still offers two exterior styles: standard and sport. However, compared to the previous model, some details have been adjusted, making it look more sporty and youthful. Additionally, the new model introduces a new titanium silver body color option. Interior: The overall design and style of the new Camry remain unchanged, but the original embedded multimedia screen has been replaced with a 10.1-inch floating touchscreen, and the air vents have been relocated below the screen. The instrument cluster has also been upgraded to a 12.3-inch full LCD display.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.