What does the PTO switch in a diesel vehicle mean?

Will the Air Conditioning of New Energy Vehicles Leak Water?

New energy vehicles may leak water when the air conditioning is turned on, which is a normal phenomenon: The leakage is related to the principle of air conditioning: The compressor of the air conditioning compresses the refrigerant, which then expands through a valve. The expansion releases heat, causing the temperature of the refrigerant to drop. If the low-pressure pipeline is not wrapped with thermal insulation foam, the surface of the pipeline can easily condense moisture from the air, and water droplets often condense and drip from the lowest point of the pipeline. Introduction to new energy vehicles: New energy vehicles refer to vehicles that use unconventional vehicle fuels as power sources or conventional vehicle fuels with new on-board power devices, integrating advanced technologies in vehicle power control and driving to form vehicles with advanced technical principles, new technologies, and new structures. New energy vehicles include hybrid electric vehicles, fuel cell electric vehicles, pure electric vehicles, and other new energy vehicles.

5

2

Share

What is the hand gesture for shifting into first gear?

Shifting into first gear involves placing the palm downward, covering the head of the gear lever, gripping it tightly with all five fingers, then pushing it to the left and forward to engage the gear. When starting the vehicle: Allow the car to idle for about half a minute after starting, then press the clutch, shift into first gear, simultaneously press the foot brake with the right foot, release the handbrake with the right hand, and slowly lift the clutch. While driving: When the speed reaches 15 to 20 km/h, shift into second gear. When the speed reaches 25 to 30 km/h, shift into third gear. Slowing down or stopping: Apply the brake to reduce the vehicle speed to a safe level, then press the clutch and shift into neutral.

1

3

Share

What are the reasons for the high temperature of new energy batteries preventing fast charging?

Here are the specific reasons why the high temperature of new energy batteries prevents fast charging: No charging indicator light: Check if the connection is normal, if the charging terminal is normal, and if the CAN signal is normal. Charging indicator light is normal: If the charging indicator light is normal but there is no charging power, check the distribution box, contactor, pre-charge resistor, etc. Charging interruption: If charging can proceed for a period of time, it indicates that the entire system is operating normally during charging. The abnormal interruption must be due to certain abnormal data affecting the controller's strategy to disconnect the contactor, such as high charging port temperature, high battery temperature, abnormal water pump circulation, etc.

2

Share

What's the Cause of the Burnt Smell from the Engine?

This odor is emitted when the anti-corrosion coatings and oil stains on the engine's exterior surface evaporate after being heated. Specific reasons: After the engine has been running for a while, its exterior surface becomes hot, especially components like the exhaust pipe. These parts are coated with various anti-corrosion treatments, which partially evaporate when heated, producing a distinct smell. Odor generation: If there are oil stains on these components, they will also evaporate when heated, creating an odor. Additionally, the engine compartment contains many plastic parts and decorative panels, which can also emit odors when heated. Don't worry; after some time, these smells will disappear as everything that can evaporate will have done so.

18

0

Share

What does the Tianjin regional indicator license plate selection mode mean?

Tianjin regional indicator license plate selection mode means the designated driving areas and time periods for vehicles registered with regional indicators, which are the same as the current regulations for vehicles with non-local license plates in Tianjin. Eligible applicants: Eligible applicants for small passenger vehicle regional indicators include: Tianjin residents; non-residents with valid Tianjin residence permits; active military personnel stationed in Tianjin; Hong Kong, Macao, and Taiwan residents, overseas Chinese, and foreigners residing in Tianjin. Important notes: Driving is prohibited within the area inside the Outer Ring Road (excluding the Outer Ring Road itself) during peak hours. Peak hours refer to two time periods on workdays (excluding Saturdays and Sundays that are adjusted to workdays due to statutory holiday shifts): 7:00-9:00 and 16:00-19:00 daily.

2

5

Share

Where is the engine number located?

The engine number can generally be found on the vehicle's registration certificate; the motor vehicle registration certificate for engine number lookup; the purchase invoice for engine number lookup; the factory certificate has the engine number; the operation certificate of commercial vehicles for engine number lookup; the vehicle purchase tax payment certificate has the engine number; the public security authority's registration records have the engine number; the vehicle insurance card has the engine number; the actual engine has the engine number. Engine model is an identification code assigned by the engine manufacturer in accordance with relevant regulations, industry or enterprise conventions, and the attributes of the engine, for a batch of identical products. It represents information such as the manufacturer, specifications, performance, characteristics, technology, purpose, and batch of the engine, including fuel type, number of cylinders, displacement, and static braking power, etc. Engines installed in passenger cars or multi-purpose passenger vehicles are marked with the professional manufacturer's name, model, and production number as required. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's range, and engine models can be the same. The engine number refers to the production number of the engine, where each engine can only have one unique engine number, and no two engines share the same number. Composition of the vehicle engine number: Front section: Includes product series code, generation symbol, and regional or enterprise code, which are selected by the manufacturer as needed and must be approved and filed by the industry standard authority. Middle section: Consists of symbols representing the number of cylinders, cylinder arrangement, stroke, and cylinder diameter. Rear section: Comprises symbols for structural features and usage characteristics. Tail section: Distinguishing symbol. When differentiation is needed within the same series due to improvements or other reasons, the manufacturer selects appropriate symbols, and the rear and tail sections may be separated by a hyphen (-).

8

1

Share

What does the PTO switch in a diesel vehicle mean?

Will the Air Conditioning of New Energy Vehicles Leak Water?

What is the hand gesture for shifting into first gear?

What are the reasons for the high temperature of new energy batteries preventing fast charging?

What's the Cause of the Burnt Smell from the Engine?

What does the Tianjin regional indicator license plate selection mode mean?

Where is the engine number located?

What is the shear value of Castrol Edge 5w30?

What is the screen in front of the steering wheel called?

Which Consumes More Fuel: Idling or Normal Driving?

Should I Claim Insurance or Pay Out of Pocket for New Car Paint Touch-Up?