What does the 'Pro' version of a car mean?

What to Do When the Light Suddenly Turns Red in a Variable Lane?

When encountering a red light in a variable lane, you must stop and wait, and cannot continue driving. While driving, if you approach an intersection with a variable lane, the variable lane indicator will show a straight-through lane. If the straight-through light is green but the lane-change indicator is red, left-turning vehicles may enter the waiting area but cannot proceed through. It is important to note that after entering a variable lane, you must not cross the line to change lanes. If caught by surveillance, you will be fined 200 yuan and receive 3 penalty points. Additionally, after entering a variable lane, vehicles must not make U-turns or exceed the speed limit, or they will face penalties. After entering a variable lane, pay close attention to the overhead road signs or the lane indicators on both sides of the road.

17

0

Share

Where to Install Car Door Anti-Collision Strips?

Car door anti-collision strips should be installed slightly below the edge of the car door. Here is relevant knowledge about car door anti-collision strips: Installation position of car door anti-collision strips: The purpose of car door anti-collision strips is to prevent collisions when opening doors, so they should be attached to the outermost edge of the door when opened. They must be placed on the most protruding part of the door edge to effectively prevent scratches, otherwise they would merely serve as decoration. Functions of car door anti-collision strips: They enhance the body lines and dynamic appearance, being both stylish and practical with fade-resistant properties, serving decorative purposes; installing anti-collision strips can protect the car body sides from being scratched or impacted by foreign objects, providing excellent protection.

1

5

Share

What should be checked before driving long distances?

Before driving long distances, the following items should be checked: 1. Braking system: Check if the brake pads are too thin. If they are thinner than 2mm, they need to be replaced. 2. Tire system: Inspect the tires for cracks. If cracks are found, the tires should be replaced to avoid blowouts. 3. Lighting system: Check the condition of the vehicle's headlights, brake lights, turn signals, fog lights, and reverse lights. 4. Oil system: The engine oil should be within the specified range, neither too much nor too little. 5. Electronic control system: Inspect the vehicle's electronic control system to prevent unexpected failures in the electronic fuel injection system, which could cause the car to break down.

4

5

Share

How Long Can a Vehicle Be Parked Without Use?

It is not advisable to park a vehicle for more than two months. A car's battery discharges every day. Generally, it will be completely drained in about 100 days. However, it's important to note that when the battery charge drops to 50%, the car will not be able to start. Besides the battery, the gasoline inside the car will also evaporate. When a car remains stationary for an extended period, significant changes occur in its technical condition. For example, the battery's capacity decreases, and its lifespan shortens. Other issues include body rust, engine oil deterioration, transmission fluid degradation and gelling, tire deformation, brake disc rust, brake pads sticking to the discs, moisture in electronic components, contact corrosion, rubber aging, and gasoline degradation and gelling. The car's manual also states that if the vehicle is parked for more than five days, the negative terminal of the battery should be disconnected.

4

Share

How to Wash Paint Off a Car?

Here are methods to remove paint: 1. Banana oil cleaning: Banana oil, also known as thinner. Banana oil can be used to dilute paint and is effective in cleaning paint spots. It's available at most paint stores, but be cautious of its flammable, explosive, toxic, and volatile properties. 2. Gasoline cleaning: Gasoline, a well-known cleaning agent, has properties similar to banana oil with good cleaning effects and less corrosive impact. It can be applied using a wet towel. 3. Tar remover and adhesive remover cleaning: These are classic specialized cleaning agents with excellent cleaning effects and affordable prices. 4. Carburetor cleaner: This is more aggressive than tar removers but still offers some cleaning effectiveness. 5. Car wash clay, also known as volcanic clay, softens after soaking in water and has strong cleaning power without being corrosive, making it one of the best products for this purpose.

7

0

Share

What is the reason why the car's AC fan does not turn on?

The reasons why the car's AC fan does not turn on are as follows: 1. Relay failure: If the relay fails, the car's radiator fan will not work. If the water temperature is normal but the radiator fan still does not work, the issue may lie with the fan's relay. 2. Poor contact: Poor contact in the main control switch or damage to the fan motor coil. Use a multimeter to measure the contact resistance of the main control switch. If the resistance is too high or zero, repair or replace the switch. 3. Loose screws: The fastening screws between the fan motor and the fan blade may be loose. Tighten the fastening screws. 4. Open or short circuit: The fan capacitor may be open or short-circuited. Check the capacitor and replace it with one of the same specifications.

5

Share

What does the 'Pro' version of a car mean?

What to Do When the Light Suddenly Turns Red in a Variable Lane?

Where to Install Car Door Anti-Collision Strips?

What should be checked before driving long distances?

How Long Can a Vehicle Be Parked Without Use?

How to Wash Paint Off a Car?

What is the reason why the car's AC fan does not turn on?

What Are the Reasons for Car Key Not Starting?

What Causes Car Antifreeze Leakage?

What Causes the Abnormal Noise When Folding the Rearview Mirror?

What are the manufacturing methods of wheel hubs and what are their differences?