···
Log in / Register

What does the priority reservation application for Subject 2 mean?

5 Answers
DelVivienne
07/29/25 8:43am

Subject 2 priority reservation application means that some candidates can successfully make a reservation in advance. The following is the relevant introduction: 1. Subject 2: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and is the abbreviation for the field driving skill test subject. 2. Test items: The test items include five mandatory tests: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curve. 3. Retake fee: If you make a reservation for the Subject 2 test but do not attend, you will have to pay a retake fee. If you do not cancel the reservation before the test, it will be treated as an absence. Absence is also considered a failing grade, and you will need to pay a retake fee for the next test.

Was this review help?
8
1
Share
ElleMarie
08/12/25 6:34am

Priority scheduling for Subject 2 means those whose test deadline is approaching get queue-jumping privileges! As someone who just passed, I deeply understand—regular scheduling takes about a month to queue up, especially during winter/summer breaks when students flood in. But if your test validity period is within 30 days or you previously failed due to lack of slots, you can apply for a green channel via the traffic management app. The system will then release reserved emergency slots. Note: Apply at least 5 days in advance and upload ID and transcript photos—rejection means trouble. Last time, a fellow examinee got rejected for missing requirements and had to repay the 500+ RMB fee after missing the window. While priority channels help clear backlog, mastering driving fundamentals through practice is what truly matters.

Was this review help?
16
2
Share
Expand All
LolaLynn
10/05/25 8:01am

Priority scheduling is essentially a measure to prevent students from delaying their exam progress due to system queues. In our country, the validity period for driving test qualifications is only three years. As the deadline approaches, regular scheduling may not secure a spot, so the priority channel safeguards the rights of such students. The operation is straightforward: open the Traffic Management 12123 APP on your phone, navigate to the exam scheduling section, and submit the required proof materials. However, it's important to note that success is not guaranteed, as the system evaluates the urgency level, with multiple failed exams taking higher priority than first-time applications. Additionally, some unscrupulous driving schools falsely claim they can manipulate priority scheduling internally to scam money, when in fact no extra payment is needed. It is recommended to apply directly through official channels for a hassle-free and reliable process.

Was this review help?
20
5
Share
Expand All
LeilaFitz
11/19/25 2:44am

Priority scheduling is essentially a backdoor for those urgently needing a driver's license. Last month, my cousin was taking the second road test and suddenly found no available slots as his exam validity period was nearing its end, leaving him frantic. Later, the instructor suggested using the priority application channel, and he managed to secure a test slot for the following week on the same day. The application process is actually quite straightforward: log into your personal account on the traffic management system, upload a screenshot of the remaining validity days along with your first test results, and the system will automatically review it before granting access to the expedited test slot pool. Note that each test session has a limited number of priority slots, so it's advisable to avoid peak periods like the beginning or end of the month. The lesson here is to plan your driver's license test early and avoid last-minute chaos when the expiration date looms.

Was this review help?
7
2
Share
Expand All
LaBrantley
01/09/26 4:21am

To understand priority booking for Subject 2, first grasp the exam mechanism: Regular booking operates on a queuing system where test slots get snapped up instantly upon release. However, to accommodate special groups, traffic authorities have established emergency channels. For instance, individuals with disabilities can prioritize booking barrier-free test centers, as can out-of-town examinees relocating for work—most crucially, those nearing expiration (within 30 days of license exam validity). With a decade of coaching experience, I've witnessed countless cases like Mr. Wang, who urgently needed certification due to job relocation—applied via priority channel yesterday and received confirmation today. Remember to submit relocation proof on the official platform during application; scrutiny is stricter than for regular candidates, and fraudulent claims will result in exam disqualification.

Was this review help?
1
0
Share
Expand All
More Forum Discussions

What type of oil does the Baojun 560 use?

The Baojun 560 uses 5W30 oil, with each oil change requiring no more than 4.5 liters. The Baojun 560 is a compact SUV produced by SAIC-GM-Wuling. Its exterior dimensions are 4620 mm in length, 1820 mm in width, and 1755 mm in height, with a wheelbase of 2750 mm, a minimum ground clearance of 202 mm, and a fuel tank capacity of 52 liters. The Baojun 560 is equipped with a 1.5T inline 4-cylinder engine, delivering a maximum horsepower of 150 hp, a maximum power of 110 kW at 5500 rpm, and a maximum torque of 230 Nm between 2000 rpm and 3800 rpm.
20
0
Share

How many kilometers does the X-Trail need for its first maintenance?

The X-Trail requires its first maintenance at around 3,000 kilometers. The main tasks for the first maintenance are changing the engine oil and the oil filter. The X-Trail is a compact SUV from Dongfeng Nissan, with exterior dimensions of 4675 mm in length, 1820 mm in width, and 1722 mm in height. It has a wheelbase of 2706 mm, front track of 1575 mm, rear track of 1570 mm, minimum ground clearance of 208 mm, and a fuel tank capacity of 65 liters. The X-Trail is equipped with a 2.0L L4 engine, producing a maximum horsepower of 151 hp, maximum power of 111 kW at 6000 rpm, maximum torque of 194 Nm at 4400 rpm.
16
1
Share

What is the function of the Tundra TYPE button?

TYP stands for tape. Pressing this button switches the recorder function to tape playback mode. Press the function switch button to toggle to AM/FM, which activates the radio function. Toyota Tundra Introduction: The Toyota Tundra is a large American-style pickup truck produced by the Japanese company Toyota, comparable in size to the Hummer. This vehicle is mainly sold in North America, with a limited number imported domestically. It is an excellent tool for long-distance travel, combining the off-road capabilities of an SUV, the cargo capacity of a truck, and the comfort of a sedan. Standard Features: Chrome front and rear bumpers, three 12V power outlets, remote central door locking, external audio interface, heated and electrically adjustable rearview mirrors, power-adjustable driver's seat. Foldable rear seats, off-road performance ABS system with 18-inch wheels, electronic stability system with traction control, tinted rear window glass, emergency brake assist system, external temperature display, four airbags + two side air curtains, radio, etc.
11
0
Share

How to Use a Seat Belt?

Methods for using a seat belt: 1. Adjust your sitting posture; 2. Adjust the seat belt; 3. Fasten the seat belt as low as possible, preferably below the waist; 4. The shoulder belt should be fastened across the chest; 5. Avoid placing sharp objects beneath the seat belt when fastening it; 6. Do not recline the seat too much. The function of a car seat belt is to instantly tighten during a collision or when emergency braking is applied. The pre-tensioning device will quickly retract, pulling the slackened belt taut and securing the occupant firmly in the seat to prevent secondary collisions. The car seat belt serves to restrain movement and act as a buffer, absorbing impact energy and dissipating inertial forces, thereby reducing or preventing injuries to drivers and passengers.
3
1
Share

How to Turn Off the Start-Stop Function in S90?

Methods to turn off the start-stop function in S90: 1. Locate the vehicle settings in the central control screen; 2. Find the start-stop system settings and click to turn it off. The S90 is a mid-to-large-sized sedan with exterior dimensions of 5090 mm in length, 1879 mm in width, and 1450 mm in height, with a wheelbase of 3061 mm. The S90 is equipped with an 8-speed automatic transmission and a 2.0L turbocharged engine, delivering a maximum horsepower of 250 hp, a maximum power of 184 kW, a maximum power speed range of 5400 to 5700 rpm, a maximum torque of 350 Nm, a maximum torque speed range of 1800 to 4800 rpm, and utilizes direct fuel injection.
19
5
Share

How to Disassemble a MINI Key?

MINI key disassembly method: 1. Press the silver button on the left side of the key and forcefully remove the mechanical key; 2. Use a small flat-head screwdriver to pry open the groove at the red circle arrow position. The MINI is a compact hatchback with exterior dimensions of 3832 mm in length, 1727 mm in width, and 1453 mm in height, a wheelbase of 2495 mm, front and rear track of 1501 mm, and a curb weight of 1225 kg. The MINI is equipped with a 1.5T L3 engine, delivering a maximum horsepower of 102 hp, a maximum power of 75 kW at 3900 to 6500 rpm, a maximum torque of 190 Nm at 1380 to 3600 rpm.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.