What does the power steering system mean?

1 Answers
McThomas
07/29/25 6:39pm
Power steering system is a device that assists the driver in adjusting the direction of the car and reduces the effort required to turn the steering wheel. Of course, power steering also plays a certain role in the safety and economy of car driving. The following are related introductions: 1. Mechanical hydraulic type. Regular inspections must pay attention to the fact that the power steering fluid in the reservoir must not be lacking. In addition, try not to keep the steering wheel turned to the extreme for too long. Also, pay attention to whether the steering is very heavy or if there is noise. If such situations occur, it is necessary to check issues such as the V-belt of the oil pump and internal pressure; 2. Electronic hydraulic type. Usually, attention should also be paid to the amount of power steering fluid. When the warning light is on, be sure to check it; 3. Electric power steering system. Although the structure of this system is relatively simple, maintenance may not be easily visible to the naked eye. If there are problems such as heavy steering or unresponsiveness, the solution is to measure with instruments.
Was this review help?
1
3
Share
More Forum Discussions

What type of engine oil is used in the Haval M6?

Haval M6 uses the original factory engine oil with the specification 5W40. For later maintenance, you can use Mobil brand engine oil, choosing the No. 1 full synthetic oil; or opt for the Great Wall brand's dedicated full synthetic oil. The viscosity of engine oil changes with temperature, so special attention must be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity, where 5W represents the ability to withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother for the car. The latter number represents the kinematic viscosity of the oil at 100°C. A higher value means the oil can maintain viscosity better at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in the Haval M6 is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until no more oil flows out. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain out; use a special wrench to remove the oil filter; apply some oil to the oil seal of the new oil filter and tighten it clockwise by hand; add the new engine oil through the oil filler cap on the engine valve cover, generally filling up to three-quarters of a standard oil bottle; start the engine and let it run for 5 minutes, then check for any leaks around the oil drain plug and oil filter, and repair if necessary; after stopping the engine, pull out the dipstick to ensure the engine oil level is within the standard range.
7
4
Share

What Causes the Seat Belt Not to Retract?

Seat belt not retracting to its original position is often caused by dirt accumulation. Proper cleaning can resolve the issue. Below are the details: 1. Over time, oil and grime (mainly from hand sweat and oil when pulling the belt) accumulate on the seat belt, causing it to harden and get stuck at the hook above the seat. 2. The friction contact area between the seat belt webbing and the B-pillar buckle accumulates excessive dirt, preventing the belt from retracting. Use dish soap or a cleaner to wash it, and the belt will function normally once dry. 3. If the seat belt slide is too close to the B-pillar, the retractor and webbing may not align properly, hindering retraction. Installing a spring washer or adjusting the slide slightly away from the B-pillar can help. 4. Obstruction of the lower guide wheel may prevent proper retraction. Remove the trim panel, clear debris or dust near the wheel, and clean it with a suitable cleaner.
18
0
Share

What is the Meaning of Car Coating?

Car coating refers to the application of a special chemical agent onto the car's paint surface. This agent undergoes a chemical reaction on the paint surface, forming a thin, hard, and transparent protective film that shields the paint from external dirt, impurities, and other contaminants for a certain period. Additional Information: 1. Car coating is the highest level of paint protection, preventing oxidation and offering multiple benefits such as enhancing paint brightness, resisting acids and alkalis, anti-oxidation, and UV protection. 2. Since the coating material itself is an inorganic substance, it does not harm the car's paint. Typically, during the coating process, aged, discolored, or brittle paint layers, as well as oxidation layers formed from long-term corrosion, are removed. This increases the paint's hardness and prevents minor scratches and swirl marks.
3
1
Share

Why can't the car start with one key?

The main reasons why the car cannot start with one key are: 1. The smart key for one-key start is low on battery. The system cannot detect the weak signal emitted by the key. In this case, you should place the smart key on the start button and then press the button to start. 2. Incorrect gear position. For automatic transmission cars, the gear must be in P (Park) or N (Neutral) to start. If it is in R (Reverse) or D (Drive), the car will not start. 3. Dead battery. This could be due to leaving the headlights on for too long or the battery reaching the end of its lifespan. Generally, the battery should be replaced every 2 years. 4. Out of fuel. If the fuel gauge shows below the red line, the car will not start. Also, pay attention to the quality of the fuel.
7
3
Share

Are Engine Oil and Transmission Fluid the Same?

Changing engine oil and transmission fluid are not the same. Below are the main differences between engine oil and transmission fluid: 1. Nature: Engine oil is the lubricant for the engine. Transmission fluid is used to keep the gear system clean. 2. Function: Engine oil lubricates and reduces friction in the engine, assists in cooling, seals against leaks, prevents rust and corrosion, and acts as a shock absorber. It is often referred to as the 'blood' of the car. Transmission fluid ensures the proper functioning of the transmission and extends the lifespan of the transmission system. 3. Characteristics: The engine is the heart of the car, containing many metal surfaces that rub against each other at high speeds and under harsh conditions, with operating temperatures reaching 400°C to 600°C. Transmission fluid provides effective lubrication even in low temperatures and reduces fluid loss under severe operating conditions. Depending on the transmission type, transmission fluid is further categorized into automatic transmission fluid (ATF) and manual transmission fluid.
8
2
Share

Choosing Between a Sedan or SUV for Your First Car?

It is necessary to make a rational choice based on your personal circumstances. Below are the main differences between sedans and SUVs: 1. Purpose: Sedans are not suitable for long-distance travel, while SUVs are ideal for long trips or traversing rough, mountainous, and water-crossing roads. Sedans are mostly used for household or business purposes. 2. Comfort: The visibility in sedans is inferior to that in SUVs. SUVs offer better driving visibility due to their height, but the interior space depends on the vehicle's size. However, the seating comfort in SUVs is not as good as in sedans. 3. Handling: Sedans are much more agile than SUVs, giving them an advantage in high-speed turns and lane changes. However, sedans are less safe compared to SUVs. 4. Driving Performance: 95% of SUVs in the world handle better than sedans on bumpy roads, while sedans outperform 95% of SUVs on well-paved roads.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.