···
Log in / Register

What does the physical examination for driver's license renewal include?

3 Answers
OJuniper
07/28/25 7:36pm
The physical examination items for driver's license renewal mainly include the following: 1. Height: Applicants for large buses, tractors, city buses, large trucks, or trolleybuses must be at least 155 cm tall. Applicants for medium-sized buses must be at least 150 cm tall. 2. Vision: Applicants for large buses, tractors, city buses, medium-sized buses, large trucks, trolleybuses, or streetcars must have uncorrected or corrected visual acuity of at least 5.0 on the logarithmic visual acuity chart. For other vehicle types, the requirement is at least 4.9. 3. Color vision: No red-green color blindness. 4. Hearing: Able to discern the direction of sound with each ear at a distance of 50 cm from the tuning fork. 5. Upper limbs: Both thumbs must be intact, and each hand must have at least three other fingers intact, with normal limb and finger movement function. 6. Lower limbs: Normal movement function. For manual transmission vehicles, the difference in lower limb length should not exceed 5 cm. For automatic transmission vehicles, the right lower limb must be intact. 7. Trunk and neck: No movement dysfunction.
Was this review help?
7
5
Share
DelKendra
08/11/25 11:25pm
When I first got my driver's license, the medical exam was quite simple. It mainly tested vision, including both naked eye and corrected vision with glasses, as well as color discrimination to check if I could distinguish traffic light colors. Hearing was also important—the doctor would have me listen to faint sounds to confirm distance perception. Additionally, they checked the mobility of upper and lower limbs, like arms and legs, to ensure normal movement for quick reactions when controlling the steering wheel and pedals. Height was sometimes measured, but it generally didn’t affect ordinary people. These checks are all to ensure driving safety—if your vision is too poor, you’d need to get glasses or retake lessons, otherwise driving could lead to accidents. The exam locations are convenient, like the DMV or designated hospitals. Remember to bring your ID and old license, and don’t forget to make an appointment. It takes about ten minutes, so no need to worry.
Was this review help?
3
5
Share
Expand All
SanChloe
09/30/25 5:49am
I just went for my driver's license renewal physical exam last month, and it felt quite novel. They first had me read an eye chart to test my vision, then identify color cards to check if I could mistake traffic lights. For the hearing test, I wore headphones and raised my hand when I heard the specified sounds. The limb examination involved moving my arms and legs to ensure no defects and normal vehicle control. The whole process was quick, completed within half an hour. If you pass, you can continue driving; if not, you need to seek treatment and try again. I think these standards are essential to avoid dangers on the road, especially when driving at night or on highways where good vision and reflexes are crucial. By the way, the exam fee isn't expensive—just a few dozen yuan—and bringing all the required documents makes it smoother.
Was this review help?
18
3
Share
Expand All
More Forum Discussions

Is the reversing radar ultrasonic or electromagnetic wave?

Reversing radar uses ultrasonic waves because they have better directivity. Ultrasonic waves are sound waves with a frequency higher than 20,000 Hz. They have good directionality, strong penetration ability, and are easy to obtain concentrated sound energy, making them suitable for distance measurement, speed measurement, cleaning, welding, crushing stones, sterilization, and disinfection. In contrast, electromagnetic waves are commonly used for data transmission. By utilizing ultrasonic waves for echolocation, the distance between the car and obstacles can be detected, providing the driver with corresponding information. During reversing, warning sounds indicating distance will be emitted, allowing the driver to perform rational operations based on the warnings to achieve smooth parking. The reversing radar mainly consists of three parts: ultrasonic sensors, a controller, and a buzzer. When it operates, the ultrasonic sensors emit ultrasonic waves outward. When these waves hit an obstacle, they bounce back and are received again by the ultrasonic sensors. The controller then calculates the distance between the car and the obstacle based on the time taken for the ultrasonic waves to be emitted and reflected back. Finally, the buzzer emits warning sounds to alert the driver.
17
5
Share

Can I park in the marked areas on the roadside?

In areas with circular prohibition signs featuring a blue background, a red circle, and a diagonal line inside the red circle, temporary parking is allowed. If there is a red cross inside, it indicates no parking or temporary parking. Yellow dashed lines on both sides of the road indicate that temporary parking is permitted. If the road has solid yellow lines, parking is prohibited. Additional information: 1. Areas where parking is not allowed include: sections of the roadside marked with solid lines; areas with no-parking signs; all sections of highways; intercity expressways; strictly controlled urban roads; within 50-100 meters before and after intersections; major urban thoroughfares. 2. Areas where parking is allowed include: temporary parking spots (marked with signs); paid parking spots; marked parking spaces on the roadside (white lines); sections of the road without solid lines on the inner side where temporary stopping is permitted.
16
4
Share

What are the differences between the 2014 and 2015 Skoda Octavia models?

The two models differ in body dimensions, engine, and suspension. Different body dimensions: Classic Octavia body dimensions: Length/Width/Height (mm) 4569/1769/1462 (mm), wheelbase 2578mm; New Octavia body dimensions: Length/Width/Height (mm) 4659/1814/1460 (mm), wheelbase 2686mm. Different engines: The Classic Octavia uses a cast iron 1.6L naturally aspirated engine with maximum power of 77KW, maximum horsepower of 105hp, and maximum torque of 155N.m; The New Octavia uses an aluminum alloy 1.6L naturally aspirated engine with maximum power of 81KW, maximum horsepower of 110hp, and maximum torque of 155N.m. Different suspensions: The Classic Octavia uses front MacPherson independent suspension and rear four-link independent suspension; The New Octavia uses front MacPherson independent suspension and rear torsion beam non-independent suspension.
2
4
Share

What Does Vehicle Replacement Subsidy Mean?

Vehicle replacement subsidy refers to a cash subsidy offered for vehicles older than 5 years. Preliminary discussions have categorized the subsidy into three tiers based on the vehicle's age: vehicles used for 5 to 6 years receive ¥5,000, those used for 6 to 8 years receive ¥6,000, and vehicles older than 8 years receive the highest subsidy of ¥7,000. Required Documents for Subsidy: Owner's ID card (original and copy) or organization certificate (original and copy); Driving license (copy) or vehicle registration certificate (copy) of the scrapped old vehicle; For new vehicle purchases, provide the new vehicle invoice and registration certificate; If processed by an agent, provide a power of attorney from the owner or legal entity and the agent's ID card (original and copy). Replacement subsidies are typically available only at 4S stores. When a customer sells their old car to a 4S store, the store provides compensation. The 4S store then sends the collected used cars to dealers, after which these vehicles enter the used car markets in different regions, improving the recycling rate of used cars.
1
3
Share

Why does the Passat Lingyu not respond when starting despite having battery power?

If the Passat Lingyu does not respond when starting, check the starter's fuse and relay. It could also be caused by poor contact in the starter's solenoid coil. Precautions for car batteries: Avoid parking the car in open parking lots for extended periods. The car engine is harder to start in winter. Each attempt to start the car should not exceed 5 seconds, and the interval between attempts should be no less than 15 seconds. Car batteries need to be charged regularly. If left unused for a long time, the battery will slowly discharge on its own. Clean the battery terminals periodically. Avoid using car electronics after the engine is turned off. Running the battery alone without the engine generating power can damage it. Function of relays: Car relays primarily function to control high current with low current. The car control module cannot directly power the actuators, as this could easily burn out the computer board. Therefore, the car control module powers the relay coil to control the actuators.
16
5
Share

Is a manual-automatic transmission CVT or AT?

Both CVT and AT can achieve manual-automatic transmission. The following are the advantages and disadvantages of manual-automatic transmissions: 1. Advantages: (1) The technologically mature AT transmission is the most widely used and popular transmission on the market today. (2) Good reliability. Traditional hydraulic automatic transmissions use a torque converter (or hydraulic coupling, multi-plate clutch, etc.), which can cushion the engine's power impact and is paired with a planetary gear mechanical combination, ensuring stable performance. It can also withstand high torque. 2. Disadvantages: (1) Low transmission efficiency and high fuel consumption. Since the engine power needs to pass through a torque converter (or multi-plate clutch, etc.) to reach the gear set, some of the engine power is wasted. Therefore, compared to manual transmissions (including CVT transmissions), AT transmissions consume more fuel. (2) Average comfort. Since AT transmissions still use fixed gear sets, gear shifts can cause jerks and noise. Although technological advancements have greatly optimized shift impacts, theoretically, AT transmissions are still not as smooth as CVT transmissions. (3) Complex structure and slightly higher manufacturing costs. AT transmissions require more mechanical parts, making the overall weight greater than other types of transmissions and the manufacturing costs higher. However, due to the over-maturity of AT transmission technology and massive production, it creates the illusion of being 'cheap.'
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.