What does the 'P' on the left side of the Camry mean?

1 Answers
DiBethany
07/30/25 6:27am
This button is the auto-hold button, which represents the vehicle's automatic braking function. Below is relevant information about auto-hold: 1. Function: Auto-hold, also known as AUTO-HOLD, enables the vehicle to automatically apply brakes based on actual conditions without requiring driver intervention. 2. Working Principle: The brake management system controls all four wheels' braking through an extension of the electronic parking brake (EPB) functionality. In other words, the auto-hold system is an extension feature of EPB, controlled by ESP components. When the vehicle temporarily stops and needs to restart shortly thereafter, the parking function is handled by ESP-controlled braking.
Was this review help?
16
4
Share
More Forum Discussions

What is the fuel consumption of the Mitsubishi Outlander?

The average fuel consumption of the Mitsubishi Outlander is 9.47L/100km. Here are some tips to reduce fuel consumption: 1. Change fluids on time: Many car owners neglect the replacement of engine oil and transmission fluid during vehicle use. Failure to change these fluids can lead to more noticeable car vibrations, slower gear shifting, and obvious jerking symptoms. 2. Pay attention to carbon buildup: Carbon buildup can cause uneven ignition, sluggish acceleration, increased fuel consumption, and in severe cases, even cylinder misfires. Remember to clean carbon deposits regularly. Do not keep the engine RPM too low for extended periods to save fuel—don't hesitate to step on the accelerator.
4
1
Share

Why did Mercedes-Benz discontinue the GLK?

Reasons for the discontinuation of the Mercedes-Benz GLK: 1. Making way for the Mercedes-Benz GLC: The design of the GLK was actually from the previous generation of Mercedes-Benz models, and both its interior and exterior had fallen behind the times. However, in 2015, Mercedes-Benz planned to focus on the GLC model, which had higher overall product competitiveness. If the GLK had continued to be sold alongside the GLC, it would have inevitably diluted the GLC's sales. 2. Mediocre sales performance: From 2012 to 2015, the monthly sales of the Mercedes-Benz GLK never exceeded 6,000 units, with the worst months seeing only around 2,000 units. Such sales figures led Mercedes-Benz to abandon updates for the GLK300, making direct discontinuation the better choice. Moreover, at that time, the BMW X3 was aggressively competing in the market, and the GLK's product strength was unable to match the X3.
11
2
Share

Is the Haval car fuel-consuming?

Haval cars are fuel-consuming. Fuel consumption of Haval cars: The fuel consumption of Haval cars ranges from 7.4L to 8.7L per 100 kilometers. The more weight the Haval vehicle carries, the higher the fuel consumption during driving. The relatively high fuel consumption of Haval cars is due to their heavy body weight and the relatively weak power of the 1.5T engine. The engine needs to operate at high speeds during driving, which places a significant load on the engine and also leads to increased fuel consumption. To reduce fuel consumption, avoid sudden acceleration or deceleration while driving, use the car's gears appropriately, and maintain a steady speed. Generally, a car is most fuel-efficient when driving at around 80km/h. Additionally, regular maintenance is essential, including cleaning the air filter and oil filter periodically and replacing the spark plugs on schedule. Statistics show that poorly maintained engines can increase fuel consumption by 10% to 20%. Factors affecting a car's fuel consumption are not limited to engine displacement but also include fuel technology, body weight, road conditions, and driving habits. Always monitor the condition of the tires while driving. Advantages of Haval cars: They perform well on urban roads and even slightly complex road conditions. Haval models are primarily urban SUVs, popular in counties and rural areas due to their characteristics that align with consumer preferences and their high cost-effectiveness. As a highly representative brand in the SUV segment, Haval has excellent advantages, including a bold and innovative exterior design, high-quality interior materials, and a stylish overall appearance. Particularly, its high cost-effectiveness makes it very appealing to consumers.
13
1
Share

Is the Chevrolet Lova 1.4 fuel consumption high?

Chevrolet Lova 1.4 has a fuel consumption of around 8.0L. The engine used in the Chevrolet Lova is relatively weaker in power, but it is more than sufficient for household use. As a family sedan, the fuel consumption of this car is acceptable. Here is the relevant introduction: 1. Factors affecting fuel consumption: The fuel consumption of a car depends on the driver's driving habits and road conditions, especially the driving habits, which have a significant impact on the car's fuel consumption. 2. The power of Chevrolet Lova: This car is equipped with a 1.4L engine. The 1.4-liter 16-valve engine of the Lova has a maximum power of 69kw and a maximum torque of 128 Nm. The engine is a highlight of this car, featuring a variable intake manifold system to increase the torque at low engine speeds.
3
1
Share

What type of engine is equipped in the New Baojun RC-6?

The engine of the New Baojun RC-6 is produced by SAIC-GM-Wuling and is a domestically manufactured engine. The engine model of the New Baojun RC-6 is LJO, with a maximum horsepower of 147, a maximum power of 108kW, and a maximum torque of 250Nm. For daily maintenance of the New Baojun RC-6 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to the mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, causing various problems for the engine. To avoid failures, change the oil regularly according to usage conditions and keep the oil volume moderate; When the oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing the oil to pass through the bypass valve and bring dirt back to the lubrication area, accelerating engine wear and increasing internal pollution; Regularly clean the crankcase. During engine operation, high-pressure unburned gas, acid, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and the cylinder wall, mixing with metal powder from part wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, blocking the filter and oil holes, making engine lubrication difficult and causing wear; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and the engine.
18
3
Share

What does it mean when the ECO light appears on the car dashboard?

ECO indicates that the vehicle's economical driving mode is activated. ECO is an English abbreviation derived from the combination of Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The Eco mode is further divided into active Eco driving mode and non-active Eco driving mode. When the ECO indicator light on the dashboard illuminates, it signifies that the vehicle's economical mode has been engaged. ECO mode can be either active or non-active. The difference lies in the fact that the active mode has a dedicated button, allowing the driver to choose whether to activate it. When the driver presses the ECO mode switch, the dashboard indicator light immediately turns on, and the vehicle automatically adjusts settings such as throttle opening, transmission shift logic, and air conditioning output power. Non-active ECO mode does not have a dedicated button. When the ECO indicator light on the dashboard illuminates, it serves merely as a reminder function. ECO automatically evaluates your driving behavior. If your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the ECO indicator light. Most vehicles employ the active ECO driving mode, meaning they have a dedicated switch button. Therefore, during daily driving, we can activate the ECO mode. However, it is unnecessary to engage ECO mode when driving at speeds exceeding 120 km/h, during idle parking, in N/P gear, or in manual mode, especially when climbing hills. In such scenarios, the ECO mode not only fails to demonstrate its fuel-saving characteristics but also impacts the vehicle's power performance. Additionally, the ECO mode typically becomes ineffective under the following conditions: When the vehicle speed exceeds 120 km/h, the system prioritizes speed, causing the ECO mode to deactivate automatically. During idle parking, in N/P gear, or in manual mode, the ECO mode may also become ineffective. When high torque output is required, such as when climbing a hill, the engine control unit prioritizes ensuring sufficient power to drive the vehicle, and the ECO mode will not function.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.