What does the oil with a wrench mean?

How many seconds should the fourth gear be maintained in Subject 3?

In Subject 3, it is best to maintain the 4th gear for more than 3 seconds. After starting in 1st gear, pay attention to shifting to 2nd gear more than 20 meters before the gear shifting project. Stabilize the speed of 2nd gear to 22 km/h. When you hear the gear shifting voice, first step on the accelerator to increase the speed of 2nd gear to 25 km/h, then step on the clutch to shift to 3rd gear, release the clutch, and step on the accelerator to increase the speed of 3rd gear to 30-35 km/h, then shift to 4th gear, and then downshift to 3rd gear. After that, downshifting does not require acceleration. Exam content: The exam content of Subject 3 includes preparation for getting on the car, light simulation test, starting, driving straight, gear shifting operation, changing lanes, parking by the roadside, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school areas, passing bus stops, meeting cars, overtaking, making U-turns, and driving at night. Notes: Lights: When changing lanes, making U-turns, turning, etc., pay attention to turning on the turn signal. After turning on the turn signal, it is best to hold it to prevent it from automatically turning off when the steering wheel is straightened, which may not be detected by the sensor. Driving straight: Generally, the training cars have been used for a long time. When driving straight, most of them will deviate. At this time, slightly turn the steering wheel to correct the direction, but the steering wheel should not be turned too much, otherwise it will affect the test results. In addition, when driving straight, look far ahead and find a reference point, so it is not easy to deviate. Speed: Except for driving straight or accelerating, it is best to control the speed of other test items at 20-30 km/h, which is easier to control.

1

4

Share

What is the ground clearance of the 2017 CR-V?

The ground clearance of the Honda CR-V 2017 is 193mm when fully loaded and 208mm when unloaded. Here is a related introduction to minimum ground clearance: Size of minimum ground clearance: The larger the minimum ground clearance, the stronger the vehicle's ability to pass over obstacles or uneven terrain, but the higher the center of gravity, which reduces stability; the smaller the minimum ground clearance, the weaker the vehicle's ability to pass over obstacles or uneven terrain, but the lower the center of gravity, which can increase stability. Factors to consider: Minimum ground clearance must account for the passability of loading and unloading platforms during transportation, and the possibility of avoiding scraping when the car is near the edge of a typical sidewalk. If sales are restricted to a specific country or region, the local road quality must also be considered. Additionally, the value of minimum ground clearance has certain limitations, as it is related to vehicle function and aerodynamics. For example, sports cars have relatively small minimum ground clearance, while SUVs have relatively large minimum ground clearance.

17

3

Share

What does violation code 1345 mean?

Traffic violation code 1345 refers to the violation of a motor vehicle driving against prohibition signs or prohibition line indications. Relevant information about traffic violation codes is as follows: Regulation introduction: Motor vehicles passing through intersections shall proceed according to traffic signals, traffic signs, traffic markings, or the command of traffic police. Motor vehicle drivers who violate the road traffic safety laws and regulations regarding road passage regulations shall be given a warning or fined. Where this law provides otherwise, punishment shall be imposed in accordance with the relevant provisions. Definition of traffic violation codes: The first digit of the code, known as the behavior code, ranges from 1 to 5 and includes 7 and 8. 1 indicates motor vehicle passage, 2 indicates non-motor vehicle passage, 3 indicates pedestrian or passenger passage, 4 indicates highway passage, 5 indicates other regulations, 7 indicates the implementation rules of provinces, autonomous regions, or municipalities directly under the central government, and 8 indicates local regulations of cities (regions, autonomous prefectures, or leagues). The second digit of the code, known as the demerit point classification code, includes 0, 1, 2, 3, 6, and 7. 0 indicates no demerit points, 1 indicates 1 demerit point, 2 indicates 2 demerit points, 3 indicates 3 demerit points, 6 indicates 6 demerit points, and 7 indicates 12 demerit points.

11

1

Share

How to Open the Fuel Tank Cap on a Ford Kuga?

Ford Kuga fuel tank cap opening method: When unlocking the doors, the fuel cap lock will also automatically release, allowing you to easily open the external cover for direct refueling, making it extremely simple and convenient. The system can automatically distinguish between gasoline and diesel fuel nozzles, significantly improving safety during refueling. In the hydraulic system, the fuel tank not only stores fuel but also serves to dissipate heat, separate air bubbles from the oil, and settle impurities. The fuel tank is equipped with many auxiliary components, such as coolers, heaters, air filters, and liquid level gauges. The Ford Kuga is an SUV under the Ford brand. In terms of body dimensions, the Ford Kuga measures 4524 mm in length, 1838 mm in width, and 1701 mm in height.

3

2

Share

Which Brand Does Infiniti Belong To?

Infiniti itself is an automotive brand. Infiniti is a luxury vehicle brand under Nissan. Its oval logo represents an infinitely extending road, with the elliptical curve symbolizing infinite expansion and also signifying 'the world.' The two straight lines represent the path to the pinnacle, symbolizing endless development. Infiniti's lineup includes models such as the Q50, Q70, QX60, QX70, and QX80. Taking the Infiniti Q70 as an example, it is a mid-to-large-sized sedan with body dimensions of 5130mm in length, 1845mm in width, and 1510mm in height, a wheelbase of 3050mm, a front suspension type of double-wishbone independent suspension, and a rear suspension type of multi-link independent suspension.

13

0

Share

How Many Kilometers Should a Car Drive Before Replacing Spark Plugs?

Car spark plug replacement intervals vary depending on the type of spark plug. Ordinary electronic spark plugs should be replaced every 20,000 kilometers; platinum spark plugs should be replaced every 30,000 to 40,000 kilometers; and iridium spark plugs should be replaced approximately every 60,000 kilometers. When the car idles and experiences frequent severe shaking, it is time to replace the spark plugs. Spark plugs are an important component of the gasoline engine ignition system. They introduce high voltage electricity into the combustion chamber and cause it to jump the electrode gap to produce a spark, thereby igniting the combustible mixture in the cylinder.

6

3

Share

What does the oil with a wrench mean?

How many seconds should the fourth gear be maintained in Subject 3?

What is the ground clearance of the 2017 CR-V?

What does violation code 1345 mean?

How to Open the Fuel Tank Cap on a Ford Kuga?

Which Brand Does Infiniti Belong To?

How Many Kilometers Should a Car Drive Before Replacing Spark Plugs?

What is the correct method for installing license plate screws?

What does streaming media mean for dash cams?

Is the throttle necessary for the second subject of the driving test?

What are the factors that affect a car's fuel consumption?