What does the number after the test session in the subject one exam reservation mean?

How to Properly Turn Off a Car with Push-Button Start?

Steps to properly turn off a car with push-button start: 1. Press the brake pedal and bring the vehicle to a smooth stop; 2. Shift the gear from D to N, and engage the parking brake; 3. Then release the foot brake, but do not turn off the power. Finally, press the foot brake again, shift the gear from N to P, release the foot brake, and press the push-button start to turn off the power and complete the shutdown. Push-button start differs from traditional mechanical key ignition and conventional starting procedures. Simply press the push-button start to turn the engine on or off, eliminating the hassle of losing or searching for keys. Most push-button start systems require pressing the foot brake during ignition.

7

2

Share

Where is the Roewe RX3 engine produced?

The Roewe RX3 engine is produced in China. This vehicle is equipped with two types of engines: a 1.6-liter naturally aspirated engine and a 1.3-liter turbocharged engine. The maximum power output of the 1.6-liter naturally aspirated engine is 92 kilowatts, with a maximum torque of 158 Newton-meters. The 1.3-liter turbocharged engine delivers a maximum power of 120 kilowatts and a maximum torque of 230 Newton-meters. The Roewe RX3 is a compact SUV under the Roewe brand, with dimensions of 4408mm in length, 1804mm in width, and 1651mm in height, and a wheelbase of 2625mm.

17

1

Share

What Causes the Reverse Light Not to Work?

Reasons why the reverse light does not work: 1. The fuse for the reverse light is blown: The reverse light fuse in a car is located inside the instrument panel. You can locate the reverse light fuse according to the fuse box instructions and check if it is blown by pulling it out; 2. The filament of the reverse light bulb is broken: Simply remove the tail light cover and take out the bulb to see if it is functioning properly; 3. The reverse light switch: The reverse light will only illuminate when the reverse light switch is properly engaged. Unplug the reverse light switch connector and bridge the switch with a wire. If the reverse light turns on, it indicates that the reverse light switch is faulty. If it does not light up, the switch is functioning correctly.

6

5

Share

What does 4WD mean on a car?

4WD on a car stands for four-wheel drive, which refers to the use of a low-ratio transmission to help the vehicle overcome slipping on muddy or snowy roads, similar to driving off-road, on rocky terrain, or over rolling hills. The vehicle must be stationary or moving at low speeds to shift into low-ratio transmission, and the shift is performed via a gear lever or button. 4WD includes three types: full-time four-wheel drive, part-time four-wheel drive, and on-demand four-wheel drive. Full-time four-wheel drive: Vehicles equipped with full-time four-wheel drive are always in four-wheel drive mode. Part-time four-wheel drive: This four-wheel drive system can switch between four-wheel drive and two-wheel drive via an in-car switch. On-demand four-wheel drive: This four-wheel drive system is typically used in some urban SUV models or some front-engine cars. Vehicles with on-demand four-wheel drive usually operate in front-wheel drive mode during normal driving, and power is only distributed to the rear wheels when the front wheels slip or when maximum acceleration is needed.

14

5

Share

What is the displacement of the Tiguan L330?

The displacement of the Tiguan L330 is 2.0 liters. This model is equipped with a 2.0-liter engine, delivering a maximum power of 137 kW and a peak torque of 320 N·m. In terms of the transmission system, the Tiguan L330 is paired with a 7-speed wet dual-clutch transmission. The Tiguan L330 is a mid-size SUV under the Volkswagen brand, with dimensions of 4712 mm in length, 1839 mm in width, and 1673 mm in height, and a wheelbase of 2791 mm. The front grille of the Tiguan L330 features extensive chrome decorations, enhancing the horizontal visual effect, while the headlight clusters on both sides are connected to the front grille, giving the front end a grand and steady appearance. Additionally, the Panorama Comfort version of this model is equipped with an openable panoramic sunroof, and the Intelligent Luxury version has enhanced smart configurations.

2

4

Share

What does a red battery icon on the car dashboard mean?

Car dashboard displaying a red battery icon indicates the generator failure warning light. Reasons for the red battery display: 1. First check if the battery terminals are oxidized - clean and polish them if oxidation is found, then reinstall and test drive; 2. Inspect whether the battery's positive/negative cables show signs of looseness, as poor connection can also trigger the warning light; 3. Battery damage may cause the indicator to illuminate; 4. Insufficient generator output can also activate the warning light; 5. Damaged generator rectifier bridge causing uncontrolled voltage output; 6. Broken generator belt, generator failure, or fractured positive/negative cables. A car battery is a device that converts chemical energy into electrical energy, serving as a DC power source. Its functions include: providing strong starting current to the starter when igniting the engine; assisting the generator in powering electrical equipment during overload; and supplying power to electrical devices when the engine is idling.

5

2

Share

What does the number after the test session in the subject one exam reservation mean?

How to Properly Turn Off a Car with Push-Button Start?

Where is the Roewe RX3 engine produced?

What Causes the Reverse Light Not to Work?

What does 4WD mean on a car?

What is the displacement of the Tiguan L330?

What does a red battery icon on the car dashboard mean?

Where is the cigarette lighter fuse in the Encore?

How Long After Passing Subject Two Can You Schedule Subject Four?

What is the Principle of the Car Wiper Sensor?

How to Deal with Paint Accidentally Spilled on a Car?