What does the mild hybrid of Hongqi H5 mean?

2 Answers
OXavier
07/29/25 3:22am
A mild hybrid system adds an electric motor, which can start the engine and also generate electricity. The mild hybrid system can reduce fuel consumption and decrease the weight of the powertrain. Many vehicles are now using mild hybrid systems. More details about the Hongqi H5 are as follows: 1. Introduction One: The Hongqi H5 is a mid-size sedan under the Hongqi brand. The dimensions of this car are 4945 mm in length, 1845 mm in width, and a wheelbase of 2875 mm. This car is equipped with two engines: a 1.5-liter turbocharged engine and a 1.8-liter turbocharged engine. 2. Introduction Two: The 1.5-liter turbocharged engine of the Hongqi H5 can produce 169 horsepower and a maximum torque of 258 Nm. This engine features direct injection technology and uses an aluminum alloy cylinder head, which reduces the engine's weight, thereby improving fuel economy and handling. It is paired with a 7-speed dual-clutch transmission. 3. Introduction Three: The 1.8-liter turbocharged engine can produce 197 horsepower and a maximum torque of 320 Nm. This engine also features direct injection technology and uses an aluminum alloy cylinder head. It is paired with a 6-speed automatic transmission (6AT), which improves gear shift smoothness and fuel economy, and the 6AT transmission is known for its reliability and durability. 4. Introduction Four: The Hongqi H5 uses a MacPherson independent suspension in the front and a multi-link independent suspension in the rear. The multi-link suspension is an improved version of the double-wishbone suspension, where the two wishbones are replaced with separate links. The multi-link suspension enhances the wheel's grip, which in turn improves the car's handling.
Was this review help?
12
3
Share
VanEdward
08/12/25 7:13am
The Hongqi H5 mild hybrid, well, it's like giving the car a little helper to make it more fuel-efficient and worry-free. I've driven similar cars before. Mild hybrid means installing a small electric motor on top of the traditional engine to assist with power during startup or acceleration, while also recovering energy during braking for reuse. Unlike full hybrids which are more expensive, it belongs to the mild hybrid system category, suitable for daily use, reducing fuel consumption by 10%-20% with less noise. The system equipped in the Hongqi H5 is quite common, especially effective in urban driving conditions—it lightens the engine load and makes the ride smoother. However, it can't run on pure electric mode and must operate in conjunction with the engine. Reliability is decent, and maintenance costs haven't changed much, but you'll notice your wallet feeling lighter over time. Overall, mild hybrid is an economical choice, more optimized than regular gasoline cars, ideal for owners seeking fuel savings.
Was this review help?
12
2
Share
Expand All
More Forum Discussions

How to Check the Deduction Points on Your Driver's License?

You can check the deduction points on your driver's license through the Traffic Management 12123 platform or by visiting the local vehicle management office where your vehicle is registered. Here is more information about driver's license point deductions: 1. In addition to administrative penalties, the traffic management department of the public security authorities implements a cumulative scoring system for road traffic violations by motor vehicle drivers, with a scoring cycle of 12 months. 2. If a driver accumulates 12 points within one scoring cycle, the traffic management department will confiscate their driver's license, and the driver must participate in road traffic safety laws and regulations training and take an exam as required. 3. If the exam is passed, the points will be cleared, and the driver's license will be returned. If the exam is failed, the driver must continue with the training and retake the exam.
12
3
Share

Causes of Oxygen Sensor Failure?

Here are the specific causes of oxygen sensor failure: 1. Ceramic breakage in the oxygen sensor: The zirconia oxygen sensor's ceramic is hard and brittle. During installation or maintenance, avoid striking it with hard tools or washing it with strong airflow, as these actions may cause the ceramic to break. Special attention is required. 2. Heater resistance wire burnout: The heater resistance wire heats the oxygen sensor to allow it to enter the working state early. If the heater resistance wire is burnt out, it becomes difficult for the sensor to reach the normal operating temperature and thus loses its function. 3. Internal wiring disconnection in the oxygen sensor: Many internal wiring issues in the oxygen sensor are caused by poor connections between the wiring harness and terminals. The failure may also result from interference by other electrical systems, mechanical or chemical damage. Sometimes, the wiring may be disconnected or come loose due to maintenance or other reasons.
2
3
Share

Can the tire aspect ratio be changed from 55 to 60?

Tire aspect ratio can be changed from 55 to 60, which does not have a significant impact on the vehicle. Here are specific details about tire aspect ratio: 1. Aspect ratio is a tire specification, simply referring to the ratio of tire width to height. After changing from 55 to 60, the tire sidewall becomes thicker, increasing vehicle comfort by filtering out minor bumps during driving. However, tire grip may decrease, though this varies by vehicle model. 2. An increased aspect ratio means the height-to-width ratio changes. A smaller aspect ratio indicates a flatter tire, resulting in better stability and stronger grip. With increased contact area, the vehicle can bear greater loads. For improved stability, it's recommended to use tires with lower aspect ratios. 3. There's no absolute good or bad in aspect ratio. For better handling and performance, flatter tires are suggested. For economy and comfort, thicker sidewall tires with stronger cushioning capability are preferable.
20
5
Share

What is a Clutch?

Clutch is the component that disconnects and connects between the power unit and the actuator. In usage, it can be divided into the following three categories: 1. Mechanically operated clutch mechanism, mainly using human power, mechanical force, or other forces to perform clutch actions. For example, vehicle dry clutch. 2. Fluid structure clutch, mainly transmitting force through fluid pressure without mechanical hard connection, such as vehicle wet clutch. 3. There is also a hydraulic clutch where the engine's power is transmitted to the hydraulic cylinder, the transmission is connected to the steel plate, and the hydraulic oil presses the friction plate against the steel plate group, causing the steel plate to form a rigid connection with the hydraulic cylinder, allowing power to enter the transmission.
12
5
Share

How to Remove Glue from Car Paint?

Here are the methods to remove glue from car paint: 1. First, clean off the dirt and dust from the car's surface and dry it. 2. Apply a high-efficiency adhesive remover to the area with glue and wait for 10 to 15 seconds until the glue softens. 3. After the surface glue has softened, use prepared paper towels to wipe off the glue. Wipe the glue in one direction, not back and forth, to avoid re-applying the removed glue back onto the car. 4. If the glue area is large or thick, apply more high-efficiency adhesive remover and repeat the wiping process. 5. Once all the glue is removed, clean the car with a specialized cloth and finally apply a bit of car wax.
6
2
Share

How to Use the Car Jack?

Here are the specific steps to use the car jack: 1. Take out the car jack from the vehicle. 2. Locate the jacking point under the side door panel of the car. 3. Place the jack at the jacking point, ensuring there are no debris underneath the jack. 4. Lift the jack straight without tilting it. 5. Use the handle to raise the jack; turning clockwise lifts the car, while turning counterclockwise lowers the jack. 6. When jacking under the chassis, you can lift the steel plate or frame, but be careful not to damage the fuel lines or wiring. Also, avoid lifting the car too high. 7. Improper jacking can damage the car's frame or even cause the car to fall. Do not keep the car jacked for too long; repair the issue quickly and lower the jack. If the car must remain jacked for an extended period, place the spare tire underneath to prevent the car from dropping.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.