What does the Mercedes-Benz poff button mean?

1 Answers
StRuby
07/30/25 1:16am
Mercedes-Benz poff button is the control switch for the parking radar. Below is relevant information about the parking radar: 1. Introduction: The parking radar system, also known as the parking assistance system, informs the driver of surrounding obstacles through sound and visual display. It eliminates the troubles caused by the driver's need to look around when parking, reversing, or starting the vehicle, helping the driver to clear blind spots and improve driving safety. 2. Working Principle: The parking radar uses ultrasonic detection, similar to the principle that bats can fly at high speed at night without colliding with any obstacles.
Was this review help?
9
4
Share
More Forum Discussions

What is the fuel consumption of the Great Wall C50?

Fuel consumption is 6.3-7.8L/km, with the following related explanation: Introduction: The Great Wall C50 is a model from the original Tengyi series. With a wheelbase of 2700mm, it basically meets the standards of a mid-size car (B-segment). Additional information: As the T-powered family sedan promoted by Great Wall Motors, the Great Wall C50 has seen steady sales growth since its launch in 2011, gaining favor among many consumers. The Great Wall C50 Fashion model was officially launched, featuring 6 upgrades in safety, comfort, and other aspects, further improving its cost-performance ratio. It is one of the few domestic sedan models equipped with a turbocharged engine.
20
4
Share

What are the reasons for the heavy steering wheel of Suzuki SX4?

Suzuki SX4's heavy steering wheel is due to the damage of the vehicle's power steering pump. The following is an introduction to the related content of friction sound when turning the steering wheel: Defects in the shock absorber's plane bearing: The function of the car shock absorber plane bearing is to provide a shock-absorbing and flexible connection between the vehicle body and the suspension, avoiding direct friction. Loose stabilizer bar: Check if the stabilizer bar bushings are loose or damaged. Loose or damaged stabilizer bar bushings can cause noise when turning the steering wheel and when driving on uneven roads. Loose stabilizer bar bushings can be resolved by adding shims.
6
4
Share

What are the reasons for the failure of Volkswagen Lavida's window to roll up and down?

Volkswagen Lavida's window cannot roll up and down for the following reasons: 1. The window lift motor is damaged or the electrical control wiring has poor contact. 2. The motor is overheated and protected. 3. The guide rail is blocked or the rubber strip is aged. 4. The initialization data is lost. 5. The window lift switch is damaged. Here are the solutions for the failure of Volkswagen Lavida's window to roll up and down: 1. If the window lift motor component is damaged, it can be directly replaced. 2. Cool the motor. 3. It is necessary to clean the guide rail and apply some lubricating oil. 4. Reset the window lift. 5. Directly replace the window lift switch.
16
0
Share

What needs to be done in the seventh year after the new vehicle inspection regulations?

Vehicle inspection is not required in the seventh year under the new regulations. Here is the relevant information: 1. No need to obtain an inspection pass sticker: After the introduction of the new traffic regulations, private cars do not require an annual inspection in the seventh year, so there is no need to collect an inspection pass sticker or undergo an annual review at the vehicle management office. 2. Inspection every two years: The new traffic regulations have optimized the inspection cycle. On the basis of the six-year exemption from on-site inspections, it is now only necessary to have an inspection every two years between the sixth and tenth years. 3. Notes: For vehicles exempt from on-site inspections within six years, an annual inspection still needs to be processed at the vehicle management office in the second and fourth years, but an on-site inspection is not required.
2
0
Share

Where is the fuel tank cap switch of Changan Uni-T located?

Changan Uni-T's fuel tank cap switch is located inside the driver's compartment. Relevant explanations are as follows: Introduction: The in-car switch is the most common method to open the fuel tank cap, which is certainly more convenient compared to using a key. The position of the in-car switch varies among different car models. Some are located on the floor to the left of the driver's seat, some on the left front door panel or the center console, all marked with a fuel pump icon. Additional Information: It's important not to overfill the fuel tank. When the tank is overfilled, the expansion of gasoline volume can rupture the tank. Therefore, cars are designed with ventilation holes at the top. If the tank is overfilled, gasoline may overflow through these ventilation holes. Moreover, gasoline is highly volatile and can ignite instantly upon contact with an open flame.
11
2
Share

Why can't the Cayenne's door be opened from the outside after unlocking?

Because the pull wire inside the door handle has fallen off, the Cayenne's door cannot be opened from the outside after unlocking. Here is some relevant information about the Cayenne: 1. Model Introduction: The Cayenne is the youngest yet classic model in the Porsche family, first unveiled at the Geneva Motor Show in March 2002. 2. Exterior Features: In terms of appearance, the Cayenne's headlights and radiator grille maintain Porsche's traditional style. The car is 1940mm wide but only 1690mm tall, with a ground clearance of 273mm and a maximum approach angle of 32 degrees. The long-travel suspension springs enhance its off-road performance. The air suspension offers a 116mm adjustment range and can be adjusted in six stages to meet the needs of both off-road vehicles and sports cars.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.