What does the Mercedes B3 maintenance due mean?

1 Answers
McFelicity
07/29/25 9:30am
It means that the scheduled maintenance time for the vehicle has arrived. Specific maintenance items need to be checked at the dealership. Below is relevant information about vehicle maintenance: 1. Maintenance schedule: The first maintenance for a car is typically due at 5,000 kilometers or six months, while the second maintenance is usually due at 10,000 kilometers or one year. 2. Maintenance locations: You can go to a repair shop or a 4S dealership for maintenance. Repair shops offer faster service and lower prices, but the quality may not be guaranteed. 4S dealerships have longer wait times, offer warranty coverage, but are more expensive.
Was this review help?
2
5
Share
More Forum Discussions

How to Adjust the Time on a Car Dash Cam?

For dash cams without GPS functionality, the time needs to be set manually. Please refer to the user manual for detailed instructions. The settings for a dash cam are as follows: 1. Video Resolution: Generally, dash cams offer the following resolution options: 1080FHD, 720P, WVGA, VGA. For memory cards below 8GB, select 720P; for 16GB and above, choose 1080FHD. For daily urban use, set the resolution to 1080P to capture more detailed footage; for long trips, opt for 720P to extend recording time. 2. Loop Recording: Different products offer various options, typically including "Off, 2 minutes, 3 minutes, 5 minutes". Selecting "Off" disables loop recording, and the dash cam will stop recording when the memory card is full without overwriting. "2 minutes, 3 minutes, 5 minutes" refers to splitting the video into segments of the specified duration for storage. 3. Motion Detection: It is not recommended to enable this feature while driving due to sensitivity and algorithm issues, which may cause significant frame loss (one tested dash cam lost nearly 20 seconds of footage). For long-term parking, enabling this feature can reduce power consumption, prolong battery life, or lessen the impact on the car battery (when using a parking monitor cable). 4. Audio Recording: When enabled, the dash cam records both video and audio inside the car.
10
1
Share

What are the precautions for second-hand car transfer?

Here are the precautions for second-hand car transfer: 1. Annual inspection: A second-hand car cannot be transferred without passing the annual inspection. According to Article 19, Paragraph 1, Item 6 of the "Regulations on the Registration of Motor Vehicles", for the application of transfer registration, if the motor vehicle has exceeded the inspection validity period, the applicant shall also submit the motor vehicle safety technical inspection certificate and the compulsory traffic accident liability insurance certificate. 2. The documents required for vehicle transfer include: the original and photocopy of the new owner's ID card; the original and photocopy of the vehicle license; the original and photocopy of the motor vehicle registration certificate, and the vehicle needs to be inspected. 3. Sign the transaction transfer contract: Both the buyer and seller also need to go to the second-hand car trading market to sign the transaction transfer contract and issue a second-hand car transaction invoice.
20
1
Share

How to Calculate Wheel Hub?

Here is the relevant introduction about wheel hub calculation: 1. The two most important elements: width and ET value. The distance between the flanges on both sides of the wheel hub. 2. The size of the wheel hub: The width of the wheel hub is 'BB'J. That is, a number multiplied by a 'J'. The distance between the flanges on both sides of the wheel hub equals 25.4 millimeters, so the width of the wheel hub equals a number multiplied by the length of 25.4 millimeters, with the final unit being millimeters. However, it should be noted that when the width of the wheel hub changes, it is evenly reflected on both sides of the wheel hub.
19
1
Share

What does it mean to release the handbrake?

Releasing the handbrake refers to the action of disengaging the mechanical handbrake when starting the car, as failure to do so can lead to wear and tear on the braking system hardware and even cause the engine to stall. Below is an introduction to the handbrake: 1. Function of the handbrake: The parking brake, commonly known as the handbrake, provides resistance to the car when parked, preventing it from rolling. The parking brake, whether manual or the parking gear in automatic transmissions, locks the drive shaft or rear wheels. 2. Smart AUTOHOLD Auto Hold function: The Smart AUTOHOLD Auto Hold function automatically engages four-wheel braking when the car is stopped at traffic lights or on slopes. To release the stationary state, simply press the accelerator lightly to disengage the brake.
16
3
Share

Can a C4 Driver's License Operate Elderly Fuel-Powered Mobility Scooters?

D-class driver's licenses are not permitted for operating four-wheeled mobility scooters. Here are the specific details: 1. According to the "Four-Wheel Electric Mobility Scooter" regulations: Four-wheel electric mobility scooters are relatively new products that have emerged in recent years, primarily designed for elderly individuals and people with disabilities. They align with the growing demand for environmentally friendly solutions and have become an emerging industry within the traditional wheelchair sector. Additionally, major developed countries have incorporated elderly mobility vehicles into their policies to address aging societies. 2. Per the "2017 Electric Vehicle Management Regulations," electric vehicle drivers must meet the following requirements: Operators of electric bicycles, three-wheeled electric vehicles, and disability wheelchairs must be at least 16 years old. To operate small low-speed electric vehicles, individuals must be at least 18 years old and possess a low-speed cargo vehicle driver's license.
8
4
Share

How is Mazda's engine?

Mazda's rotary engine is a significant highlight. In recent years, Mazda has developed a compression-ignition engine, whose fuel economy can rival Toyota's hybrid and Honda's hybrid systems, although it has not been installed in domestic models. For Mazda, besides its youthful and sporty appearance, its biggest selling point is Skyactiv technology. It's worth noting that Skyactiv is not just about the engine but also includes optimization technologies for the transmission, chassis, and body structure. Skyactiv gasoline engines actually feature two cycle modes: the Otto cycle and the Miller cycle. The Otto cycle is a mode where the compression ratio equals the expansion ratio, while the Miller cycle is a mode where the compression ratio is less than the expansion ratio. Under high-load conditions, the engine operates in the Otto cycle, while in other conditions, it switches to the Miller cycle.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.