···
Log in / Register

What does the max button on a car mean?

4 Answers
EvaLynn
07/29/25 10:07am

The max button on a car is generally the strong cooling button for the air conditioning. When the max button is pressed, the air conditioning will enter the maximum cooling mode, which can quickly lower the temperature inside the car. The max on the engine oil dipstick indicates the highest fluid level. When adding engine oil, do not let the fluid level exceed the max mark. The AC button in the car is the switch for the car air conditioning cooling. When the weather is hot and you need to turn on the air conditioning to cool down, press the AC button. The indicator light on the button will illuminate, and the car air conditioning compressor will start working, blowing cold air from the vents to lower the temperature inside the car. When cooling is needed, press the AC button and adjust the temperature selection switch to the blue section, then turn on the fan switch. Only then will cold air blow out.

Was this review help?
14
1
Share
LaCarlos
08/13/25 1:00pm

The MAX button on my car's AC is incredibly useful. I remember last summer when temperatures hit 40°C, the seats were hot enough to fry eggs when I first opened the car door. Pressing the MAX button instantly blasted me with powerful cool air. This button makes the AC compressor run at full speed, maximizes airflow, and automatically switches to recirculation mode to block hot air from entering. In about 3-5 minutes, it can cool down a scorching hot cabin—perfect for cars after being parked in the sun. However, I should remind everyone that it's best to switch back to auto mode once the car cools down, or you'll end up shivering. Once, I forgot to turn off MAX mode during a long drive and got so cold I had to dig out a jacket—plus, it burned an extra liter of fuel compared to normal use, which really wasn’t worth it.

Was this review help?
6
3
Share
Expand All
Alina
10/07/25 3:06am

Last time I took my kid to the amusement park, the little one was crying from the heat in the back seat. I immediately pressed the AC button labeled 'MAX'. The air conditioning instantly went full blast, with cold air rushing out of the vents, and my kid stopped crying right away. Later, when I asked a mechanic, I learned that this button activates the AC's super cooling mode, using maximum fan speed and the lowest temperature for rapid cooling. It also automatically locks out outside air to prevent hot air from entering, delivering immediate results. However, I don't use it continuously on long drives because the fan noise is too loud and interferes with listening to music. Plus, prolonged use of recirculation mode can make the cabin stuffy, so I usually switch to auto mode after cooling down. Now during hot weather, this feature is a must when starting the car—it cools twice as fast as normal mode.

Was this review help?
6
3
Share
Expand All
EvelynLynn
11/20/25 4:29am

Veteran driver teaches you the clever use of the MAX button: Pressing it is equivalent to performing three actions simultaneously—turning the fan speed to maximum, lowering the temperature to the lowest, and activating the recirculation mode. The principle is simple: to unleash the full potential of the air conditioning. I've seen many car owners at auto repair shops complaining about weak AC, often because they didn't use this powerful mode correctly. In a real test on a 37°C scorching day, with the car interior at 40°C, turning on MAX cooled it down to 26°C in just 5 minutes. However, two points to note: 1. Don't use it for too long to avoid draining the battery, and 2. Avoid direct airflow to the windshield to prevent catching a cold.

Was this review help?
16
0
Share
Expand All
More Forum Discussions

Handle Violations First or Renew the License First?

First, you must handle the violations before applying for license renewal. When renewing a driver's license, it is not allowed to have any outstanding violations or unpaid fines. All violations must be settled, and fines must be paid before the license can be renewed. If you have outstanding violations and need to renew your license, please first visit the traffic enforcement station of the local police branch to handle the violations, pay the fines at the bank, and then proceed to the relevant license renewal office to complete the renewal process. Documents required for license renewal: Bring two copies of your ID card, two recent 1-inch color passport photos without headwear, the original ID card, the original driver's license, and a medical examination certificate from a county-level or higher hospital (free medical examinations are also available at the vehicle management office). License renewal process: The driver submits the required documents to the vehicle management office where the driver's license was originally issued. The vehicle management office will process the renewal within one working day after verifying the documents.
16
5
Share

Are LED headlights brighter than xenon headlights?

LED headlights are brighter than xenon headlights. The functions of automotive LED lights are: 1. Activating turn signals to alert following vehicles and reduce rear-end collisions; 2. Improving road visibility to enhance driving safety; 3. Informing trailing vehicles about braking actions to prompt speed reduction; 4. Using hazard lights during emergency stops or poor visibility conditions to notify surrounding traffic. Maintenance methods for automotive LED lights include: 1. Regularly inspecting lamp covers to prevent moisture accumulation; 2. Periodically replacing bulbs; 3. Properly adjusting headlight height; 4. Using high-quality replacement bulbs; 5. Protecting lights from foreign object impacts.
1
5
Share

How much cheaper is 92 gasoline compared to 95 gasoline?

92-octane gasoline is cheaper than 95-octane gasoline, but only by a few cents. Here are more related details: 1. The difference between the two: The most obvious difference between these two types of gasoline is the ratio of n-heptane and isooctane. 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane. From this, it can be seen that 95-octane gasoline has a higher isooctane content and better anti-knock performance. 2. Avoid frequently switching between different octane ratings: Frequent switching of gasoline octane ratings by car owners can confuse the engine's ignition system. In practice, car owners should not frequently change gasoline octane ratings. If they choose 92 or 95, they should stick with it consistently. If they want to switch gasoline types, they should stick with the chosen type for a long time. Additionally, mixing gasoline types is highly discouraged, as it can confuse the engine.
17
2
Share

What does car idle speed mean?

The idle speed of a car refers to an operating condition where the engine runs without any load, meaning the car's gear is in neutral. Introduction to car idle speed: The engine speed during idle is called the idle speed. The idle speed can be adjusted by changing the throttle opening size and other methods. Idle speed means the engine is "running without doing work." When the engine is running, if the accelerator pedal is fully released, the engine is in idle condition. When adjusting the idle speed, the RPM should not fluctuate abruptly, as this may cause premature wear to the engine. It is best to have the adjustment performed at an automotive repair facility. Introduction to car idle condition: When the engine is running, if the accelerator pedal is fully released, the engine is in idle condition. When adjusting the idle speed, the RPM should not fluctuate abruptly, as this may cause premature wear to the engine. It is best to have the adjustment performed at an automotive repair facility. When starting the engine with the vehicle in a parked state, the minimum stable engine speed is called parking idle speed (the process of the engine transitioning from a cold idle state to an idle state at normal operating temperature is called warm-up or heating).
6
0
Share

What is the displacement of the 2018 Audi A6L 35TFSI?

2018 Audi A6L 35TFSI has a displacement of 2.0L, equipped with a 2.0T turbocharged engine, with a maximum horsepower of 224ps, maximum power of 165kw, maximum torque of 350nm, and matched with a 7-speed dual-clutch transmission. The 2018 Audi A6L 35TFSI is a mid-to-large-sized car with body dimensions of: length 5034mm, width 1874mm, height 1480mm, wheelbase 3012mm, front track 1627mm, rear track 1618mm, minimum ground clearance 115mm, and curb weight 1770kg.
10
4
Share

What is Continental tire?

Continental is a brand of tires, belonging to the German Continental Group. The functions of tires are: 1. To transmit driving force, braking force, and steering force to achieve vehicle operation; 2. To support vehicle loads; 3. To reduce and absorb vibrations and impacts during driving, avoiding severe vibrations that could damage vehicle components. The maintenance methods for tires are: 1. Regularly clean stones from tire treads; 2. Minimize exposure to direct sunlight; 3. Promptly check tire pressure; 4. Pay attention to suspension maintenance; 5. Regularly inspect front wheel alignment; 6. Be mindful of driving habits, choose road surfaces carefully while driving, avoid objects that could puncture or scratch tires, and steer clear of chemical spills that could corrode tires.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.