What does the manual transmission driving test (Subject 3) cover?

What does it mean when the ABS light comes on after a vehicle inspection?

It indicates a fault in the vehicle's anti-lock braking system. Here is more information about ABS: 1. ABS refers to the anti-lock braking system in a car. The activation and deactivation of the anti-lock braking system are controlled by signals sent from the speed sensor to the computer. If the speed sensor malfunctions, the anti-lock braking system will not operate properly, and the indicator light on the car's dashboard will illuminate. 2. A fault in the anti-lock braking system can affect normal driving. If the indicator light comes on while driving, it is advisable to stop and inspect the vehicle as soon as possible and avoid continuing to drive. However, there is no need to panic in such a situation, as it only means the ABS is not functioning properly. The regular braking system of the car will still work, but it is important to have the vehicle inspected at a repair shop as soon as possible.

17

1

Share

What is the power mode of the CFMOTO 250SR?

CFMOTO 250SR has two power modes: Sport mode and Eco mode. After switching to Eco mode, the motorcycle's power response speed slows down, throttle response becomes less sensitive, and fuel consumption decreases. Introduction to CFMOTO 250SR: The 250SR is a motorcycle under the CFMOTO brand, equipped with a single-cylinder, liquid-cooled, four-stroke engine. The dimensions of the 250SR are 2010mm in length, 750mm in width, and 1080mm in height, with a wheelbase of 1360mm and a seat height of 780mm. The single-cylinder engine of this motorcycle has a maximum power output of 20.5kw at 9750rpm and a maximum torque of 22nm at 7500rpm. The engine's cylinder bore is 72mm, and the stroke is 61.2mm. Eco mode: In Eco mode, the throttle response is slower, the maximum RPM is lower, the ride is smoother, vibrations are reduced, and the RPM within the resonance range increases.

17

1

Share

What does it mean to have a gecko in the car?

Gecko is a homophone for shelter, avoiding misfortune, and ensuring blessings in Chinese. Sticking a gecko symbol is considered auspicious. Originally, the gecko emblem was affixed to Audi cars, serving as the logo for Audi's quattro all-wheel-drive technology. This gecko symbol vividly illustrates the strong ground adhesion of the quattro system, highlighting its performance. Below is more information about Audi Quattro: 1. Audi Quattro is a car model introduced by the renowned automotive developer and manufacturer Audi, named to celebrate the 30th anniversary of the quattro brand. 2. The Audi Quattro is based on the RS5 model, with dimensions of 4280mm in length, 1860mm in width, and 1330mm in height, and a wheelbase of 2600mm. The powertrain comes from Audi's 2.5L five-cylinder turbocharged engine, with output increased to 408 horsepower and 480N·m. The quattro concept car weighs 1300kg, accelerates from 0 to 100 km/h in 3.9 seconds, and boasts an ultra-low fuel consumption advantage of 8.5 liters per 100 km.

15

1

Share

Will Replacing Engine Bearings Have Any Impact?

Replacing engine bearings has no impact. Crankshaft: The crankshaft, along with the big and small bearings on the pistons. After an oil leak where there is no lubrication, the engine continues to operate, causing the crankshaft bearings to stick to the cylinder block, and the piston bearings to stick to the crankshaft. Function of the Crankshaft and Connecting Rod: The motion pair between the connecting rod and the crankshaft is a friction pair. The connecting rod and crankshaft are matched with bearing shells, lubricated by engine oil in between, with a clearance of only 0.03-0.05mm. Most crankshafts are made of ductile iron, with different grades having varying quenching hardness, generally ranging between HB130---240. The crankshaft receives the force transmitted by the connecting rod and converts it into torque, which is then output through the crankshaft to drive other engine accessories. The crankshaft is subjected to the combined effects of centrifugal force from rotating masses, periodically varying gas inertial forces, and reciprocating inertial forces, causing it to bear bending and torsional loads.

12

3

Share

What is the speed limit in residential areas?

The speed limit in residential areas is 20 kilometers per hour. Reasons for the speed limit: Residential areas have high pedestrian traffic, and excessive speed can easily lead to traffic accidents, resulting in injuries or fatalities to pedestrians. Benefits of the speed limit: Speed limits for motor vehicles in residential areas are primarily set to protect pedestrians, as these areas have high foot traffic and unpredictable movement patterns. For example, students may cross the road in groups, and children may run around unpredictably. This requires motor vehicles to be able to stop within a very short distance. Specific speed limit requirements: In residential areas, the speed limit is generally set at 5 kilometers per hour. For larger main roads within the community, the limit may sometimes be set at 20 kilometers per hour. Roads within residential areas are not regulated by traffic laws, so there are no explicit speed limit regulations in traffic laws for these roads. Roads within residential areas are collectively owned by all property owners, and the speed limit should be determined by the property management company hired by the community. If property owners have questions about the speed limit, they can directly or through the homeowners' association raise their concerns with the property management company.

14

2

Share

Can Car Seat Belts Be Replaced?

Car seat belts can be replaced. If a seat belt is damaged, it should be replaced immediately; otherwise, it may compromise the safety of the vehicle's occupants. Car seat belts are safety devices designed to restrain occupants during a collision, preventing secondary impacts with the steering wheel, dashboard, or other objects, and avoiding injuries or fatalities from being ejected from the vehicle. Below are the correct methods for wearing a car seat belt: 1. Proper Usage. The seat belt should be fastened across the hips and chest, forming a horizontal V-shape over the pelvis and ribcage. It should be used by one person only; sharing a seat belt is strictly prohibited, and twisting the seat belt should be avoided. 2. When using the seat belt, ensure it does not press against hard or fragile objects, such as mobile phones, glasses, or pens in pockets. 3. When the seat is unoccupied, retract the seat belt into the retractor and place the buckle in its storage position to prevent it from hitting other objects during emergency braking. 4. Avoid reclining the seat back too much, as this may reduce the effectiveness of the seat belt. Always ensure the buckle is securely fastened to prevent it from coming loose under force and failing to provide protection.

20

1

Share

What does the manual transmission driving test (Subject 3) cover?

What does it mean when the ABS light comes on after a vehicle inspection?

What is the power mode of the CFMOTO 250SR?

What does it mean to have a gecko in the car?

Will Replacing Engine Bearings Have Any Impact?

What is the speed limit in residential areas?

Can Car Seat Belts Be Replaced?

How to Determine if the VVT Timing Gear is Good or Bad?

Will driving with an unsecured trunk be considered a traffic violation?

Can I get a refund for a passenger bus ticket?

What is the oil filter for Baojun 310?