What does the L gear in an automatic transmission mean?

What Does the Inspection Period Mean?

Here is the relevant introduction about the inspection period: 1. Inspection period: refers to the valid usage period of a driver's license. 2. If it is the first time applying for a driver's license: then the validity period of the driver's license is 6 years. 3. First renewal of the driver's license: If within the 6-year validity period, no scoring cycle has accumulated 12 points, a 10-year validity driver's license will be issued upon renewal. If one or more years accumulate 12 points, a 6-year validity driver's license will still be issued upon renewal. 4. After obtaining a 10-year validity driver's license: during the next renewal, if within the 10-year validity period, no scoring cycle has accumulated 12 points, a long-term valid driver's license will be issued upon renewal.

4

2

Share

What are the differences between Shell's different colors?

Shell's different colors have the following distinctions: 1. Different viscosity grades: Shell HX7 has three viscosity grades, which are 5W-30, 5W-40, and 10W-40. 2. Different grade rankings: Different color packaging represents different models, and their intended uses and levels vary. The grades from low to high are White Shell, Red Shell, Yellow Shell, Blue Shell, and Gray Shell. 3. Different classifications: White Shell HX2 and Red Shell HX3 are both mineral oils, Yellow Shell is divided into HX6 and HX5, and Blue Shell HX7 is a semi-synthetic oil. 4. Different oil qualities: In terms of oil quality, Shell's gray oil is the best, and the grade of Gray Shell oil is higher than that of Blue Shell oil.

19

5

Share

Which point to focus on when driving straight in Subject 2?

Simply observe the reference points. Below are relevant introductions about Subject 2: 1. Introduction: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skill test. 2. Small vehicle C1/C2 Subject 2 test items: Include five mandatory tests—reverse parking, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (commonly known as S-curves) (some regions have a sixth item: highway toll card collection). 3. Large vehicle Subject 2 test items: Include pole tests, stopping and starting on a slope, parallel parking, passing a single-plank bridge, curve driving, right-angle turns, passing a width-restricted gate, passing continuous obstacles, driving on bumpy roads, narrow road U-turns, as well as simulations of highways, continuous sharp mountain curves, tunnels, rainy (foggy) conditions, slippery roads, and emergency handling.

11

5

Share

What does a 2.0t displacement mean?

T stands for the model with a turbocharger (TURL). 2.0 simply refers to the displacement of a regular engine, which is 2.0 liters. 2.0T means the engine is equipped with a turbocharger, has a displacement of 2.0 liters, and can achieve power equivalent to or exceeding 2.4 liters. Fuel consumption is higher due to the increased power, but emissions are cleaner. Below is relevant information: 1. Engine displacement: Simply referred to as displacement, it is the total of the working volumes of all cylinders in the engine, the product of single-cylinder displacement Vh and the number of cylinders I. The working volume of a cylinder refers to the gas volume swept by the piston from top dead center to bottom dead center, also known as single-cylinder displacement, which depends on the cylinder bore and piston stroke. 2. Turbocharger: Essentially an air compressor that increases air intake by compressing air. It utilizes the inertial impulse of the exhaust gas from the engine to drive the turbine in the turbine chamber, which in turn drives the coaxial impeller. The impeller compresses the air delivered from the air filter pipe, pressurizing it before it enters the cylinder.

6

4

Share

What are the penalty standards for hill-start parking?

When the right side of the vehicle is more than 30 centimeters away from the edge line, 10 points will be deducted. If the front bumper exceeds the specified distance by more than 50 centimeters, 10 points will be deducted. Failing to use the parking brake after stopping will result in a 10-point deduction. Stalling the engine during startup will incur a 10-point penalty. Rolling back less than 30 centimeters after starting will also lead to a 10-point deduction. Any other mistakes will result in a 100-point penalty. Here is relevant information: 1. Precautions: When parking the vehicle, the front bumper must not exceed the marking line by more than 50 centimeters, otherwise 100 points will be deducted. After completing the hill-start parking, if the engine stalls during restart, 10 points will be deducted. It is crucial to master the coordination between the accelerator and clutch during startup. The left turn signal must be used when starting the vehicle, otherwise 10 points will be deducted. 2. Test items: The C1 and C2 license tests include five mandatory items: reverse parking, parallel parking, hill-start parking and starting, right-angle turns, and curve driving (commonly known as S-curves). Some regions may include a sixth item: highway toll card collection.

14

5

Share

Can You Drive Wearing Thick or Medium-Heeled Shoes?

It's best not to. When driving, the movement and stopping of the car, the speed adjustment, and the operation of the clutch pedal, brake pedal, and accelerator pedal all rely on the control of both feet. High heels generally come in three types: stiletto, wedge, and thick-soled chunky heels. Regardless of the pedal type, wearing any of these shoes while driving can pose safety hazards. Additionally, if there are floor mats in the car, the heels might drag the mats under the pedals, making it impossible to press them. Below is additional information: 1. Hazards of wearing flip-flops: (1) Reduced control: When driving in flip-flops, the hard soles typically affect the driver's foot sensation on the pedals, making it difficult to gauge the pressure applied to the accelerator or brake, potentially leading to accidents. (2) Delayed reaction time: Flip-flops have open backs and can easily slip off. If they do, it can delay the driver's reaction time, compromising road safety. (3) Increased safety risks: Flip-flops may get caught on the brake pedal, slipping off the foot and rendering the vehicle uncontrollable. They might also get stuck under the brake pedal, preventing proper or any braking, which could hinder effective emergency braking in critical situations. 2. Precautions: Bulky shoes, like hiking boots, are not lightweight or flexible enough, potentially hindering precise reactions in emergencies. Sneakers with air cushions or air pockets in the soles are also unsuitable for driving as they prevent the foot from fully sensing pedal pressure. The soles should not be too smooth; otherwise, it's almost like driving barefoot. Shoes with good friction ensure better contact between the sole and the pedal. The higher the shoe, the farther the brake is from the foot, reducing pedal sensitivity. Larger gaps in the sole increase the risk of the pedal getting stuck or the foot 'missing' the pedal.

17

1

Share

What does the L gear in an automatic transmission mean?

What Does the Inspection Period Mean?

What are the differences between Shell's different colors?

Which point to focus on when driving straight in Subject 2?

What does a 2.0t displacement mean?

What are the penalty standards for hill-start parking?

Can You Drive Wearing Thick or Medium-Heeled Shoes?

What are the point deduction issues in Subject 1?

How Long Does It Take to Restore the Full Score After Deducting 6 Points?

What is the Principle of Drifting?

What is the reason why the position lights do not work but the headlights do?