What does the L gear in Accord mean?

1 Answers
JakeAnn
07/29/25 7:57pm
Accord's L gear is the low-speed forward gear, which is only available in automatic transmission cars. The commonly used automatic transmission gears are: parking gear P, reverse gear R, neutral gear N, forward gear D, and sport mode S. The Accord is a mid-to-high-end sedan under Honda. The dimensions of this car are 4930mm in length, 1845mm in width, and 1470mm in height, with a wheelbase of 2775mm. In terms of appearance, the design of this car is more sporty compared to the previous generation. From the side, the rear adopts a fastback-style design, and the side waistline features a three-dimensional design that extends from the front to the rear, visually elongating the body length.
Was this review help?
6
0
Share
More Forum Discussions

What transmission does the Audi Q7 use?

Audi Q7 uses an 8-speed automatic manual transmission. Here is more information about the Audi Q7: 1. The Audi Q7 is a mid-to-large-sized SUV launched by Audi. 2. In terms of power, this car has launched two power models, equipped with a 2.0-liter turbocharged engine and a 3.0-liter supercharged engine respectively. 3. In terms of the transmission system, the engine is matched with an 8-speed automatic manual transmission. Generally speaking, only some high-end models will use this type of transmission, because the structure of the transmission is relatively complex, and the production and manufacturing costs are higher. 4. The increased number of gears makes the gear ratio of the transmission more dense. This design allows the car to drive in a more reasonable gear, which can reduce the engine speed to a certain extent, thereby reducing the fuel consumption of the engine and lowering the cost of using the car.
11
4
Share

Can the engine be restarted after water ingress?

After a vehicle has been submerged in water, it must not be restarted for the following reasons: 1. If the vehicle stalls during water submersion, it indicates that the engine has already taken in water. Since water is difficult to compress, the piston cannot reach its original top dead center position, resulting in a shorter piston stroke and a noticeably lower top dead center position. Restarting the engine under these conditions can cause the piston connecting rod to bend, and in severe cases, damage the cylinder block, leading to irreparable harm. 2. Restarting the engine after water ingress, which results in engine damage, will not be covered by any insurance compensation. Moreover, attempting to restart the engine after water submersion severely violates the principles of insurance claims, so the insurance company will not provide compensation. In such a situation, the first step should be to try to push the vehicle out of the water, then call for rescue or contact a nearby repair station to have the vehicle towed away for inspection and repair.
4
2
Share

What Causes Squeaky Brakes in Cars?

Reasons for squeaky brakes in cars: 1. Rust on brake discs or pads; 2. New brake pads; 3. Excessive wear on brake discs or pads; 4. Installation issues. After prolonged parking, especially in humid or rainy conditions, rust or dirt may form on the brake discs or pads. This issue usually resolves after driving for a while, or you can apply butter or specialized lubricant at the connection between the brake pads and calipers. New cars may also produce similar noises when braking, as new brake pads and discs require a break-in period, which is normal. However, if the noise persists after driving for some time, there may be an issue.
18
1
Share

What type of oil is used in the Fengjun 5 diesel version?

Fengjun 5 diesel version uses C3-5W-30 oil. The following is the relevant introduction to the oil: 1. Oil, that is, engine lubricating oil, can lubricate and reduce wear, assist cooling and cooling, seal and prevent leakage, prevent rust and corrosion, and reduce shock and buffer the engine. 2. Oil refers to the lubricating oil specially used in internal combustion engines. In addition to lubrication, it also has the functions of cleaning, rust prevention, and cooling. The base oil currently used in oil is composed of hydrocarbons, poly-α-olefins (PAO), and polyolefins (PIO), all of which are organic compounds composed of only carbon and hydrogen. Some high-grade oils contain less than 20% esters. Automotive lubricant related standards: 1. Viscosity standard: SAE (Society of Automotive Engineers) viscosity classification is adopted to distinguish the different temperature ranges applicable to lubricating oil. 2. Performance standard: API (American Petroleum Institute) performance classification is mainly adopted to distinguish the performance and quality of lubricating oil. 3. SAE and API standards have been confirmed by the International Organization for Standardization (ISO), so engine oil no longer has another international standard.
17
3
Share

Does the Patrol have a diesel version?

The Patrol only comes with gasoline engine models. The Patrol is equipped with two engines in total, one is a 4.0-liter naturally aspirated engine, and the other is a 5.6-liter naturally aspirated engine. The 4.0-liter naturally aspirated engine delivers 279 horsepower and a maximum torque of 394 Nm. This engine reaches its peak power at 5,600 rpm and its maximum torque at 4,000 rpm. It features direct fuel injection technology and is paired with a 7-speed automatic transmission. The 5.6-liter naturally aspirated engine produces 398 horsepower and a maximum torque of 555 Nm. This engine achieves its peak power at 5,800 rpm and its maximum torque at 4,000 rpm. It also utilizes direct fuel injection technology and is mated to a 7-speed automatic transmission. The Patrol features a double-wishbone independent suspension at both the front and rear. It comes with a full-time four-wheel-drive system and employs a body-on-frame construction. The Patrol is considered a rugged off-road vehicle, boasting strong off-road capabilities along with excellent reliability and durability. Its engines provide substantial torque, enhancing the vehicle's ability to escape challenging situations.
15
4
Share

Can I Apply for the Inspection Exemption Label Online for Exempted Vehicles?

Yes, you can apply for the inspection exemption label online for exempted vehicles. The online application process for the inspection exemption label is as follows: 1. Log in to the local online vehicle management office website and click on 'Business Processing'; 2. Select 'Apply for Inspection Exemption Label'; 3. Read the business instructions, check the box to agree, and fill in the application information. For cases where compulsory traffic insurance and vehicle and vessel tax are not connected to the network or verification fails, users need to provide photos of the compulsory traffic insurance certificate and vehicle and vessel tax certificate; 4. Select the mailing address, confirm the information, click to obtain the verification code for input, and click 'Complete' to submit. After submission, you can choose to pay the courier fee online. The vehicle management office will review the materials, and upon approval, the traffic department will deliver the inspection label to the owner via postal express.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.