What does the Hongqi H5 48V mild hybrid system mean?

3 Answers
OAvery
07/29/25 7:50am
Hongqi H5 48V mild hybrid system refers to the hybrid power of the car. More introductions about the mild hybrid system are as follows: 1. Introduction: Automobile mild hybrid power refers to the light hybrid vehicle. The automobile mild hybrid power changes the original power output mode of the car. The mild hybrid car generally adopts pure electric power to start, so there is no big vibration and noise when starting the car. The mild hybrid car has a power recovery system. When stepping on the brake, this system will recover the wasted energy and charge its own battery to achieve the effect of energy saving and emission reduction. 2. Classification of hybrid vehicles: Series hybrid electric vehicle (SHEV) is mainly composed of three major power assemblies, including engine, generator and drive motor, which are connected in series to form the power system of HEV. The engine and drive motor of parallel hybrid electric vehicle (PHEV) are both power assemblies. The power of the two major power assemblies can be superimposed and output, or output separately. Hybrid hybrid electric vehicle (PSHEV) is an electric vehicle composed of series and parallel structures, mainly composed of three major power assemblies, including engine, electric generator and drive motor.
Was this review help?
1
2
Share
DerekRose
08/13/25 2:37am
The Hongqi H548V mild hybrid system actually refers to the 48-volt mild hybrid system equipped in Hongqi models. This is a design that combines a traditional fuel engine with a small electric motor, making driving more fuel-efficient and smoother. Simply put, it uses a 48-volt battery to assist the engine—such as enabling quiet starts during stop-and-go situations, providing extra power during acceleration, and recovering energy during braking to store it for later use. Unlike plug-in hybrids, it can't run purely on electricity for long distances, but it's much more cost-effective. Hongqi employs this technology primarily to reduce fuel consumption by about 10%, lower emissions, and improve responsiveness. In daily driving, the power delivery feels seamless, especially in urban stop-and-go traffic, making it more efficient. Installation isn't complicated, but battery lifespan requires attention to maintenance. Overall, it's an energy-saving and practical transitional choice.
Was this review help?
7
3
Share
Expand All
Kinsley
10/05/25 2:45am
I think the 48V mild hybrid system in the Hongqi H5 is quite common nowadays, as many cars are promoting this technology. It essentially integrates a small battery and electric motor into the powertrain to assist the engine. The benefits are particularly noticeable during driving - vibration-free starts, responsive acceleration, and significant fuel savings during stop-and-go traffic. The 48V system offers low costs and simple maintenance, unlike expensive pure electric systems. A friend who drives a Hongqi SUV mentioned that fuel consumption dropped from 10L to just over 8L after adopting mild hybrid, making it both eco-friendly and economical. However, don't expect pure electric range for long trips - it's mainly for short-distance assistance. Just be aware that battery replacement after aging might be somewhat troublesome, but overall it serves as a good transitional solution.
Was this review help?
5
0
Share
Expand All
More Forum Discussions

Can the Bubbled Rear Window Film Be Removed?

Bubbled rear window film can be removed. Bubbles in the film can obstruct the driver's view, and timely removal and replacement can enhance driving safety. Bubbles in the rear window film can result from improper installation techniques or prolonged heating, causing expansion and contraction that leads to bubbles. It is recommended to remove and reapply the film. Areas for car window film application include: front windshield film, rear windshield film, side window film, and quarter window film. The benefits of car window film are: 1. Heat insulation and sun protection to reduce interior temperature; 2. UV blocking to slow down the aging of car interiors; 3. Preventing injuries from accidental glass shattering; 4. Creating a private space; 5. Reducing air conditioning consumption; 6. Enhancing aesthetics; 7. Reducing glare.
9
3
Share

Why Can't I Engage Reverse Gear in a Manual Transmission?

The reasons for being unable to engage reverse gear in a manual transmission are: 1. The clutch is not fully depressed; 2. The transmission has malfunctioned; 3. The gear teeth happen to align; 4. The car temperature is low, and the transmission oil is not fully lubricated; 5. The vehicle speed and gear position do not match. A manual transmission car uses a manual shift mechanical transmission to adjust the vehicle speed, where the driver manually moves the gear lever to change the gear meshing position inside the transmission, altering the gear ratio to achieve speed change. The gear positions in a manual transmission car are: 1. 1st gear is the starting gear: used for vehicle start-up; 2. 2nd gear is the passing gear: used for navigating complex road surfaces and handling complex situations; 3. 3rd gear is the transition gear: used for low-speed driving on urban roads; 4. 4th gear is the driving gear: used for prolonged high-speed driving; 5. 5th gear is the high-speed gear: used for long-distance highway driving.
10
5
Share

What does Dual VVT mean?

Dual VVT separately controls the engine's intake and exhaust systems. During rapid acceleration, the intake VVTi advances the intake timing and increases valve lift, while the exhaust VVTi delays the exhaust timing. This effect is similar to a small turbocharger, effectively enhancing engine power. Additionally, the increased air intake ensures more complete combustion of gasoline, achieving the goal of low emissions. The maintenance methods for a Dual VVT engine are: 1. Maintain good crankcase ventilation; 2. Regularly change the oil and filter; 3. Periodically clean the crankcase; 4. Regularly clean the radiator; 5. Periodically clean the fuel system; 6. Use lubricants appropriately.
19
5
Share

Where to Add Transmission Fluid for a Car?

There are two bolts on the transmission housing of a car, one on the left and one on the right. The upper bolt is the oil filler hole; simply unscrew it when you need to add transmission fluid. The function of transmission fluid is to ensure smooth gear shifting, lubricate internal transmission components, and prevent damage to the transmission during gear changes. The steps for changing transmission fluid are as follows: 1. Start the engine to warm it up, allowing the transmission to reach operating temperature. Remove the drain bolt and collect the old fluid from the transmission. 2. Once the old fluid has completely drained, open the oil pan, replace the transmission filter, reinstall the oil pan and drain plug. 3. Add new transmission fluid, start the car, and shift through all gears. 4. Check if the automatic transmission fluid level is normal and make adjustments as needed.
11
0
Share

How to Replace the Cabin Air Filter in a 2016 Teana?

Steps to replace the cabin air filter in a 2016 Teana: 1. The cabin air filter is located inside the glove compartment on the passenger side. Open the glove compartment; 2. Remove the cabin air filter cover; 3. Pull out the old cabin air filter and install the new filter according to the arrow direction; 4. Reinstall the cover and glove compartment. The 2016 Teana is a mid-size 4-door 5-seater sedan with body dimensions of 4901mm in length, 1850mm in width, and 1450mm in height, and a wheelbase of 2825mm. This model features a MacPherson strut front suspension and a trapezoidal control arm multi-link rear suspension. In terms of power, it is equipped with a 2.0L naturally aspirated engine, paired with a CVT transmission.
2
1
Share

Where is the water temperature gauge displayed on the Volkswagen Jetta?

The water temperature gauge on the Volkswagen Jetta is displayed in the central electronic display of the instrument panel. When the car's water temperature is too high, the water temperature warning light on the instrument panel will illuminate to alert the driver. The water temperature indicator is used to show the temperature of the coolant in the engine, with some models using colors to indicate different conditions: blue indicates the water temperature is too low, red indicates it is too high, and no light means it is normal. Taking the 2020 Jetta VS5 as an example, its body dimensions are 4419mm in length, 1841mm in width, and 1616mm in height, with a wheelbase of 2630mm. This model is equipped with a 1.4L inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 250Nm, paired with a 6-speed automatic transmission.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.