What does the Honda XRV fuel pump recall mean?

1 Answers
LeTheo
07/30/25 3:08am
Honda's fuel pump recall refers to the process where the manufacturer of the defective automotive product, in accordance with legal requirements and procedures, eliminates the product defect due to a faulty fuel pump. Below is relevant information about Honda: 1. Honda is a joint venture company engaged in automobile production and research & development. Its product lineup includes the Crown series SUVs, Accord series sedans, and Odyssey multi-purpose series vehicles. 2. Among them, the Accord features clean and smooth body lines, with a design that blends fashion, dynamism, and elegance. The taillight design incorporates LED high-mounted brake lights commonly used in luxury models and a sophisticated triangular combination taillight, presenting a simple and lively appearance.
Was this review help?
8
1
Share
More Forum Discussions

Is It Normal to Hear a Buzzing Sound When Turning On the Lights?

It is normal to hear a buzzing sound when turning on the lights. Reasons for the buzzing sound when turning on the lights: Because the LED headlights installed in vehicles generally have high power, although LED is a cold light source, it still generates a certain amount of heat when operating at high power. Therefore, during the design phase, automotive LED headlights are equipped with a cooling fan at the back. When the vehicle detects that the headlight temperature is high, the cooling fan automatically starts, resulting in the buzzing sound. Automotive Headlights: Also known as automotive front lights or LED daytime running lights, as the eyes of a car, they not only relate to the owner's external image but are also closely linked to safe driving at night or under adverse weather conditions.
16
0
Share

How often should a family sedan be inspected after six years?

Small and micro non-operational passenger vehicles must be inspected once every 2 years within the first 6 years; for vehicles older than 6 years, an annual inspection is required, and they must also undergo a testing line inspection after 6 years. Regulations regarding annual inspections: New vehicles within the first 6 years are exempt from inspection twice, with inspections required at the 6th and 8th years, where the vehicle must undergo testing line inspection. For private vehicles over 10 years old, the original inspection cycle still applies, meaning annual inspections for vehicles aged 10 to 15 years, and semi-annual inspections for vehicles over 15 years old. Cases where annual inspection fails: When a registered motor vehicle undergoes safety technical inspection, if the registered content on the vehicle's driving license does not match the actual condition of the vehicle, or if the mandatory third-party liability insurance certificate is not provided as required, the inspection will not be passed.
7
0
Share

What brand is the transmission of GAC Trumpchi GS4?

The transmission of GAC Trumpchi GS4 is from Aisin. Founded in 1969, Aisin is a world-renowned professional research, development, and manufacturer of automotive automatic transmissions. In the field of automotive automatic transmissions, Aisin's products hold the highest market share globally. The GAC Trumpchi GS4 uses a 7-speed wet dual-clutch transmission. A wet dual-clutch transmission refers to a type where the clutch plates are immersed in transmission oil. There are two types of dual-clutch transmissions: dry and wet. For the GAC Trumpchi GS4 transmission, the following points should be noted during daily use: Do not delay changing the transmission oil for too long. Although many modern vehicles claim to have maintenance-free transmission oil, 'maintenance-free' does not mean it never needs changing. Prolonged failure to change the transmission oil can lead to damage to internal components like bearings and the housing. Avoid coasting in neutral for extended periods. While driving manual transmission vehicles, many experienced drivers might coast in neutral. However, for automatic transmission vehicles, coasting in neutral can cause the transmission to overheat and may result in a noticeable jolt when shifting back into Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle has come to a complete stop. Some drivers, aiming for smooth operation, shift into reverse while the vehicle is still moving, which can severely damage the transmission gears and, over time, lead to gear grinding or other failures. Avoid frequently climbing steep slopes in Drive (D). On steep inclines, automatic transmission vehicles can overheat due to high load or may upshift too early, resulting in insufficient power. In such cases, using manual mode to maintain lower gears or switching to sport mode can help protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, it should be transported using a flatbed tow truck with the vehicle in Neutral (N). Towing with a rope or directly dragging the vehicle is not recommended.
12
3
Share

Is the first maintenance free?

Generally speaking, the first car maintenance is free. When purchasing a car, there will be a car warranty manual. Bring the warranty manual and go to the brand's 4S store to perform the first maintenance. The first maintenance of the vehicle is very important and needs to be done on time by the owner. During the first maintenance, the vehicle can be inspected to confirm the usage condition of the car. Precautions for the first car maintenance: Perform maintenance according to the specified time. Each car comes with a maintenance manual when it leaves the factory, which will indicate the maintenance interval. Car owners can perform the first maintenance based on the information in the car maintenance manual. When purchasing a car, sales personnel usually remind consumers to perform the first maintenance at a certain time or after reaching a certain mileage. Items that need to be done during the first maintenance. The first car maintenance will include free replacement of engine oil and oil filter, as well as a comprehensive inspection of the car, which generally takes about half an hour. The first maintenance can be done at a 4S store or at a location closer to the owner, but only cars that have their first maintenance at a 4S store can enjoy the car quality guarantee. Pre-check the problems that exist before the first maintenance. During the break-in period of the car, the owner can evaluate the usage condition of the car. If there are any doubts, they can be promptly reported to the technicians during the first maintenance.
7
4
Share

Can the Imperial 400's seat height be lowered?

In fact, it cannot be lowered because, in a sense, it only adjusts the softness and hardness of the seat. Such a subtle change will not have a significant impact on the overall seat height. Appearance of the Imperial 400: In terms of appearance, the Imperial 400 largely inherits the design essence of the first Imperiale from 1956. At that time, the iconic single-cylinder transverse egg-shaped engine of the Imperiale 125 was one of its distinguishing features, and its low center of gravity was well-reflected. The Imperial 400 also strives to replicate this design on its double-cradle frame as much as possible. Powertrain configuration of the Imperial 400: The Imperial 400 is equipped with a 374cc single-cylinder air-cooled 2V engine, delivering a maximum power of 15.5 kW (21 Ps) at 5500 rpm and a maximum torque of 29 Nm at 4500 rpm. Based on the data, the engine is relatively focused on performance at low RPMs.
11
0
Share

What is the maximum speed of the Jog i during the break-in period?

The Jog i can reach a speed of 80 km/h during its 800 km break-in period. Generally, it is not recommended to exceed 100 km/h. Definition of the break-in period: The break-in period for a new motorcycle refers to the process where mechanical components initially come into contact, rub against each other, and mesh together during operation. After the break-in period: Upon completion of the break-in period, the new motorcycle should be taken to an authorized service station for a full break-in maintenance. This mainly includes changing the engine oil, replacing the oil filter, cleaning, measuring cylinder pressure, removing carbon deposits from the combustion chamber, removing the speed limiter, adjusting the engine idle speed, inspecting the braking system, adjusting the clutch pedal free travel, and tightening the front suspension and steering mechanism.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.