What does the Honda tire pressure check mean?

Where is the rearview mirror heating button on the Lynk & Co 03?

The rearview mirror heating button for the Lynk & Co 03 is located as the fourth button below the center console screen, featuring a small icon with three upward-pointing arrows. Here is more extended information about the rearview mirror heating button: Button function: When the rearview mirror heating switch is pressed, the indicator light on the button will illuminate. The heating element will rapidly heat up to a fixed temperature within a few minutes. In low external temperatures, steam will rise from both side mirrors, and water droplets on the mirror surface will gradually evaporate as the temperature rises, causing the fog to slowly disappear. This achieves the effect of heating the mirror, defogging, and defrosting. The working principle of electrically heated rearview mirrors is very simple and not highly costly. It involves installing a heating element (heating film) inside the mirror lenses on both sides. During rainy or snowy weather, when the driver activates the rearview mirror heating function, the heating element will quickly heat up to a fixed temperature within minutes, typically between 35-60 degrees Celsius. This helps heat the mirror, remove fog and frost, providing great convenience for the driver. Electrically heated rearview mirrors are very effective against fog and moisture but are not particularly effective against rain. In light rain, raindrops on the mirror will be somewhat dried; in heavy rain, the effect is average, merely preventing excessive water accumulation on the mirror. Heated rearview mirrors are generally more practical in winter. Frost on the front windshield can be removed by turning on the heater to blow air onto the glass after starting the car, while frost on the rear windshield can be removed by activating the rear window heating switch, which uses heating wires embedded in the rear window glass. Suitable weather conditions: Applicable during rainy and snowy weather.

18

2

Share

What Types of Vehicles Can Use the Hong Kong-Zhuhai-Macao Bridge?

Five types of vehicles can use the Hong Kong-Zhuhai-Macao Bridge: freight vehicles, shuttle buses, cross-border taxis, cross-border buses, and cross-border private cars. Cross-border private cars refer to vehicles with dual license plates from Guangdong and Hong Kong. Private cars without these dual license plates are not permitted on the bridge. To experience the Hong Kong-Zhuhai-Macao Bridge, you must complete the necessary customs procedures and take either a cross-border bus or shuttle bus. After the bridge opened, approved Guangdong-Hong Kong dual-plate vehicles from the Huanggang, Wenjindu, Shatoujiao, and Shenzhen Bay ports were allowed to use the bridge without additional permits (initially for a two-year period). The Hong Kong-Zhuhai-Macao Bridge is a bridge-tunnel system in China connecting Hong Kong, Zhuhai in Guangdong, and Macao. It is located in the Lingdingyang waters of the Pearl River Estuary in Guangdong Province and forms part of the southern section of the Pearl River Delta Regional Ring Expressway.

18

5

Share

What causes the set light to illuminate on the Bora?

set light is the tire monitoring light, and the illumination of the set light on the Bora is mostly due to abnormal tire pressure. Here are some related expansion materials: 1. The relationship between tire pressure and load capacity: Tire pressure is an indicator of a car's load capacity. The size of the car's load depends on the level of tire pressure. According to the relationship between the tire's load index, tire pressure, and tire load capacity, the higher the tire pressure, the greater the load capacity, and the lower the pressure, the smaller the load capacity. 2. The relationship between tire pressure and vehicle dynamics: When a car is driving at a constant speed on a horizontal road, it must overcome rolling resistance from the ground and air resistance. Tire pressure has a significant impact on the rolling resistance coefficient. When the pressure decreases, the rolling resistance coefficient increases rapidly. This is because when the tire pressure decreases, the deformation of the rolling tire increases, leading to an increase in hysteresis loss.

1

3

Share

Will a slight touch leave marks on the car?

A slight touch generally won't cause damage to the overall structure of the car, but severe contact may result in scratches, paint chipping, and other issues. Touch Test for Scratches: If your fingers can feel obvious unevenness or roughness, it means the primer has been damaged. For less noticeable cases, use a polishing wheel with polishing enhancer to remove the oxidized layer on the car's surface and smooth out minor scratches. The polishing agent will penetrate the paint and restore it, not only removing the scratches but also refreshing the paint. Visual Inspection: For obvious cases where the primer is damaged, visual inspection can help. Typically, white cars have black or gray primer, while dark-colored cars have the opposite. If white is visible, the scratch is too deep, and it's recommended to repaint the affected area.

2

Share

What are the turn signal requirements for the Subject 2 driving test?

Subject 2 driving test turn signal requirements are: turn signals are required for slope parking and starting, right-angle turns, and parallel parking. Below are the relevant details: 1. Subject 2: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment. It refers to the field driving skills test. For small vehicles C1 and C2, the test items include five mandatory components: reverse parking, parallel parking, slope parking and starting, right-angle turns, and curve driving. For large vehicles A1, A2, A3, B1, and B2, the test items include pole test, slope parking and starting, parallel parking, single-plank bridge crossing, curve driving, right-angle turns, narrow gate crossing, and continuous obstacle crossing. 2. Notes: Each test item in the examination area is monitored by GPS positioning. The control line (yellow dotted line) of each item represents the test area for that item. Once the front of the vehicle crosses the control line, it means the vehicle has entered the test area for that item, and the test must be completed according to the rules of that item.

16

5

Share

Is the two-tone color scheme only available on the top trim of the Hongqi H9?

The two-tone body color is only available on the top trim of the Hongqi H9. Here is the relevant information: 1. Overview: The Hongqi H9 is the new-era C+ class luxury flagship sedan of the Hongqi H series. It inherits the design of the Hongqi E-Jing GT concept car. The front face adopts a 1:1.414 silver ratio, making it appear more dignified and aligning with the brand's positioning. 2. Other details: The Hongqi H9 features a vertical waterfall-style front grille and a split-type headlight design. The car measures 5137/1904/1493 mm in length, width, and height, with a wheelbase of 3060 mm. It is equipped with two engine options: a 2.0T turbocharged + 48V mild hybrid and a 3.0T supercharged engine.

18

3

Share

What does the Honda tire pressure check mean?

Where is the rearview mirror heating button on the Lynk & Co 03?

What Types of Vehicles Can Use the Hong Kong-Zhuhai-Macao Bridge?

What causes the set light to illuminate on the Bora?

Will a slight touch leave marks on the car?

What are the turn signal requirements for the Subject 2 driving test?

Is the two-tone color scheme only available on the top trim of the Hongqi H9?

Can I Check My Results After Passing Subject Four?

Where is the Wuling Hongguang S coolant tank located?

Can a 53-year-old obtain a B2 driver's license?

What is the maintenance schedule for the Roewe i5?