What does the hold button on the car key mean?

1 Answers
VonCaden
07/29/25 7:17pm
Car key hold button means that after holding it for a few seconds, the trunk can be opened. This long-press design is mainly to avoid the danger of opening the trunk by pressing the hold button while the vehicle is moving. In addition, there is another function, that is, remote engine start. Within a remote distance, hold the hold button for 2 to 3 seconds, and the car will start automatically. This function can adjust the interior temperature in advance during winter and summer. In addition to unlocking, locking, and opening the trunk on the car key, some models of car keys also have a red button added. Pressing this button will cause the vehicle to sound the horn and flash the hazard lights, making it easier for the owner to quickly locate the car.
Was this review help?
19
5
Share
More Forum Discussions

Which gear to use when going downhill in a Camry

Use D gear when going downhill in a Camry. Here are the relevant details: 1. Body dimensions: The 2021 Camry is a mid-size sedan with a body length of 4885mm, width of 840mm, height of 1455mm, a wheelbase of 2825mm, a fuel tank capacity of 60 liters, and a curb weight of 1530kg. 2. Powertrain: The 2021 Camry features a MacPherson strut front suspension and an E-type multi-link rear suspension. It is equipped with a 2.0L naturally aspirated engine delivering a maximum horsepower of 178PS, maximum power of 131kW, and maximum torque of 210Nm, paired with a 10-speed continuously variable transmission.
5
3
Share

Can a raised front bumper be restored?

The front bumper has a slight lift and can be pressed back. In severe cases, it is recommended to go to a repair shop or 4S shop for treatment. More relevant information is as follows: 1. Bumper function: The car is equipped with a bumper at its front and rear ends, which not only has a decorative function but also is a safety device that can absorb and mitigate external impact forces, protect the body, and ensure the safety of passengers. 2. Bumper composition: The outer panel and buffer material are made of plastic, and the crossbeam is made of cold-rolled sheet with a thickness of about 1.5 mm pressed into a U-shaped groove; the outer panel and buffer material attached to the crossbeam, and the crossbeam is connected to the longitudinal beam of the frame with screws, which can be disassembled at any time. The plastic used for this plastic bumper is generally made of two materials: polyester and polypropylene, and is formed by injection molding.
4
4
Share

How many factories does Porsche have worldwide?

Porsche has 31 factories worldwide. Here is an introduction to Porsche-related content: 1. Porsche Cayenne: As a 5-seater super SUV, the Porsche Cayenne Turbo S is equipped with a powerful 520-horsepower turbocharged engine, combined with a dynamically tuned chassis to satisfy enthusiasts of high-performance cars, and offers a highly praised all-wheel drive. Thus, the Porsche Cayenne Turbo S sets a new standard for SUV performance. 2. Power: The entry-level Porsche Cayenne's displacement has been increased from 3.2 liters to 3.6 liters, with maximum horsepower increased to 290 hp (an increase of 40 hp), while maintaining a high level of maximum torque at 39.3 kg·m. It achieves 0 to 100 km/h acceleration in 8.1 seconds and a top speed of 227 km/h, compared to the older model's data of 9.1 seconds and 214 km/h.
16
3
Share

Where is the crankshaft position sensor located on an old Jetta?

The crankshaft position sensor is installed on the transmission clutch housing, located at the rear left side of the engine block. Below is relevant information: 1. Definition: The crankshaft position sensor, also known as the engine speed sensor, is one of the most critical sensors in the engine's centralized control system. It detects signals for piston top dead center and crankshaft rotation angle, inputting them into the engine ECU to control ignition timing and fuel injection timing. It also serves as the signal source for measuring engine speed. 2. Function: The crankshaft position sensor detects engine speed and crankshaft position signals. Through its detection, the vehicle's operational status can be more intuitively understood. Additionally, the crankshaft position sensor is the primary signal for controlling injection and ignition timing. In microcomputer-controlled electronic ignition systems, the crankshaft position sensor uses engine crankshaft angle signals to calculate specific ignition timing, enabling ignition at more appropriate times and avoiding potential vehicle faults and safety hazards caused by improper ignition.
11
0
Share

What Causes a Car to Fail to Start and Display a Transmission Fault?

The reasons why a car fails to start and displays a transmission fault are as follows: 1. Weak battery: The starter begins to turn but lacks sufficient speed or power, eventually making only a clicking sound without turning. Low temperatures in winter or forgetting to turn off certain electrical devices can prevent the vehicle from starting, especially when used frequently for short trips at low speeds in winter, causing the battery voltage to drop below the rated value and preventing normal operation. 2. Blocked fuel flow: There is no oil pressure in the engine's fuel supply line. This situation often occurs on particularly cold mornings due to long-term contamination of the fuel lines. At extremely low temperatures, water and debris can mix and block the fuel lines, resulting in a failure to start. 3. Poor ignition system performance: On very cold days, the low intake temperature causes poor fuel atomization in the cylinders. Combined with insufficient ignition energy, this can lead to cylinder flooding, where excessive fuel accumulates in the cylinders, exceeding the ignition limit concentration and preventing the engine from starting.
3
2
Share

What are the reasons why the car door remote key cannot open?

There are several situations where the key cannot open the car door: 1. The remote key cannot open the car door: If there is no time to replace the battery, you can use the mechanical key to open the car door. Generally, remote keys have a hidden mechanical key. 2. The remote key is interfered with by signals: It is relatively rare for the key signal to be interfered with. When you ensure that the key battery has power and the following situations occur, it can be judged as signal interference: (1) If the vehicle is often parked in the same location and the key cannot open the car door, but this does not happen elsewhere. (2) When there is a signal source near the vehicle, the car key cannot open the car door; after the signal source moves away from the vehicle, the car door can be opened normally. 3. The connection device between the door handle and the door lock itself is faulty: Since the door connection mechanism may fall off due to driving bumps, the door lock cannot sense the action of pulling the door handle. 4. The car door is frozen and cannot be opened in winter: If the car door lock, door handle, or door frame is frozen in winter, then the key will definitely not open the car door. Note that if the car door is frozen, do not pull it violently, as this can easily damage the car door. Only use hot water to pour on the frozen part to speed up the melting of the ice.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.