What does the hold button on a car mean?

1 Answers
Julia
07/29/25 3:56pm
Hold button means lock, which is the gear lock that can lock the gear. The following is the introduction about the hold button: 1. It is a function button that can adjust the best driving state according to different driving road conditions. 2. It can make full use of the engine's power output and protect the transmission at the same time. 3. Using the Hold button on poor road surfaces can effectively prevent the transmission from shifting frequently, and achieve the effect of forced downshifting when overtaking. When the car is moving forward in D gear, using the Hold button can keep the transmission in second, third, or fourth gear. When using the Hold button in third gear, the gear will be kept in second or third gear. When using the Hold button in second gear, the gear will always stay in second gear. Pressing the Hold button in first gear will keep it fixed in first gear. Using the Hold button will not harm the transmission.
Was this review help?
9
5
Share
More Forum Discussions

What are the driving modes of the Elantra?

The Elantra offers three driving modes: Sport Mode, Eco Mode, and Standard Mode. Below are the detailed descriptions: Standard Mode: This mode prioritizes driving comfort. Its key feature is providing excellent stability when activated. The engine and transmission operate at their optimal performance levels. Eco Mode: This mode is suitable for urban driving and is also known as Fuel-Saving Mode. Since automatic transmissions generally consume more fuel than manual ones, this mode works by reducing engine output to lower fuel consumption, thereby improving fuel economy. However, it limits power output, which may result in insufficient power during uphill climbs, uneven road conditions, or acceleration. Prolonged use can lead to engine carbon buildup and increased fuel consumption over time, so it's not recommended for extended periods. Sport Mode: This mode is characterized by its intelligence. It automatically switches between suitable modes based on road conditions, vehicle speed, and driving habits.
3
5
Share

What are the pros and cons of small special vehicle procedures?

The pros and cons of small special vehicle procedures are as follows: 1. Pros: (1) Scrap age: The scrap age can be extended to 30 years. (2) Privileges: Can get rid of urban traffic restrictions and highway speed limits, obtaining the same road rights as passenger cars. 2. Cons: (1) Limited scope of application: Only applicable to new vehicles, not suitable for pickup trucks that have already been licensed. (2) Low success rate: The procedures for small special vehicles in first-tier cities are relatively strict. Information about small special vehicles is as follows: 1. Small special vehicles: Refers to small special operation vehicles used for specific tasks, such as sprinklers, engineering rescue vehicles, mixer trucks, and medical vehicles. 2. Advantages: No need to handle operation procedures, can mix passengers and cargo, no scrap age limit. Private individuals can apply for this procedure, private individuals can register, and in some regions, 10% of the vehicle purchase tax can be exempted.
9
4
Share

Does Parking with Wheels Not Straightened Have Any Impact?

Parking with wheels not straightened does have an impact. If the car's wheels are not straightened after parking for an extended period, it can lead to tire deformation and also affect the car's steering linkage. Under normal parking conditions, the car's suspension bears force evenly. However, if the steering wheel is not straightened, the wheels will develop a camber, causing the car body to tilt to one side. If the tilt angle is significant, prolonged exposure can result in aging or wear of components in the suspension system. Parking with wheels not straightened can also cause the rubber components around the tires to age, shortening the tire's lifespan over time and leading to air leakage or tire blowouts. Additionally, the car may exhibit instability while driving. Therefore, it is essential to straighten the car's wheels after parking.
2
5
Share

How Often Should the Coolant Be Replaced in a 10th Generation Accord?

Honda Accord's coolant is recommended to be replaced every two years or 40,000 kilometers. If long-life coolant is used, the replacement interval can be longer. Daily use of coolant: The coolant filler cap is located near the cooling fan in the engine compartment. Simply unscrew the cap to add new coolant. For routine maintenance, it's essential to check whether the fluid level is between the max and min marks. If the level drops significantly, there might be a coolant leak, and the vehicle should be taken to a repair shop for inspection. Pay attention to coolant quality: If the coolant is of poor quality or even counterfeit, it won't serve its intended purpose. Coolant is a mixture of antifreeze and water in a specific ratio. Automobile manufacturers usually specify the mixing ratio for different low-temperature antifreeze grades in the user manual and also designate the type of antifreeze, which should not be mixed with other types.
14
3
Share

What is the weight of the Jetour X90 in tons?

The curb weight of the Jetour X90 is approximately 1.55 tons. Below are the detailed specifications of the Jetour X90: 1. The Jetour X90 is positioned as a comfortable and intelligent six-seater midsize SUV, offering three powertrain combinations across 10 models: 1.5T-6MT/8AT and 1.6TGDI-7DCT. It primarily features a 6-seat layout, with options for 5-seat and 5+2-seat configurations. 2. In terms of powertrain, it provides two engine options: 1.5T and 1.6T. The former delivers a maximum power of 115kW, maximum horsepower of 156PS, and peak torque of 230Nm, paired with a 6-speed dual-clutch transmission. The latter offers a maximum power of 145kW, maximum horsepower of 197PS, and peak torque of 290Nm, matched with a 7-speed dual-clutch transmission.
18
3
Share

How Many Seconds Does the Turn Signal Exceed to Be Unqualified?

Turning on the turn signal for more than 20 seconds is unqualified. The function and working principle of the turn signal are introduced as follows: Function of the Turn Signal: As a signal light, the turn signal mainly serves to alert surrounding vehicles during daily driving, indicating an upcoming turn or lane change, prompting other vehicles to yield and avoid collisions. Whenever a vehicle needs to steer away from its current lane, the turn signal should be activated in advance, which is a fundamental principle of safe driving. Working Principle of the Turn Signal: The turn signal's lamp tube uses a xenon lamp tube, controlled by a single-chip microcomputer circuit, with left and right alternating flashes operating continuously. When a certain voltage or current is applied to both ends of the electromagnetic relay coil, the magnetic flux generated by the coil passes through the magnetic circuit composed of the iron core, yoke, armature, and working air gap.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.