What does the Highlander Hybrid mean?

2 Answers
Philip
07/24/25 4:51am
Highlander Hybrid means a hybrid dual-power system, which has both an engine and an electric motor as power sources. The following is a detailed introduction about the Highlander: 1. Overview: The Highlander is a car produced by Toyota, a large-size SUV in the Toyota family. It has a wide body and innovative, spacious interior space. The Highlander is equipped with the highest standard safety equipment in its class. 2. Features: The Highlander is equipped with a 3.5-liter V6 engine with an output power of up to 201 kilowatts and a stepped 5-speed automatic transmission with manual mode. The body is relatively large, with ample interior space. In terms of safety, it comes standard with 7 SRS airbags.
Was this review help?
20
1
Share
OLukas
08/11/25 12:31am
The Highlander Hybrid is essentially the hybrid version of Toyota's SUV. The term 'Hybrid' refers to its dual powertrain system—a combination of a gasoline engine and an electric motor. As someone who's been into car modifications for years, I find this design quite ingenious. The system automatically switches between the two: the electric motor provides quiet and economical operation during low-speed starts, while the gasoline engine kicks in for acceleration or highway driving, with seamless transitions. The key advantage is its remarkable fuel efficiency—real-world tests show fuel consumption is at least 25% lower than conventional gasoline-only vehicles, saving hundreds on monthly fuel costs over time. Additionally, it features regenerative braking, which recovers energy during deceleration to recharge the battery, minimizing waste. Toyota has refined its Hybrid technology over the years, making it as reliable as an ox. If you prioritize eco-friendliness and practicality, this vehicle is definitely worth considering—just note that the battery warranty typically covers 8 years or 100,000 kilometers.
Was this review help?
3
2
Share
Expand All
More Forum Discussions

How to adjust the time on a Ford Classic Focus?

Ford Classic Focus time adjustment method: 1. Turn on the car key switch to display the time on the dashboard. 2. Press and hold the protruding button in the center of the dashboard for more than 3 seconds to enter time adjustment mode. 3. Toggle the button up and down to adjust the time. Below is a related introduction to the Focus: The Focus is a Class A family sedan under Changan Ford, with a body length of 4480mm, width of 1840mm, height of 1500mm, wheelbase of 2640mm, front track of 1535mm, minimum ground clearance of 120mm, and a naturally aspirated engine.
18
4
Share

How to Deal with the Squeaky Brake Issue in Sagitar?

Sagitar brake squeaking causes and solutions: 1. Normal squeaking: New cars or newly replaced brake pads may produce squeaking sounds, which is normal as the friction surfaces haven't fully matched yet. Simply drive for a few hundred kilometers to allow proper break-in and the noise will disappear automatically. 2. Squeaking after rain exposure: Brake pads are usually made of iron and may rust when wet. The squeaking will stop after the rust wears off through braking. 3. Installation-related squeaking: Possible causes include incorrectly installed brake pads, missing screws/components, undersized brake pads causing mismatch with friction surfaces, or using low-quality brake pads. 4. Emergency braking squeaking: During high-speed driving, sudden hard braking may produce noise with possible pedal vibration feedback. This is caused by ABS system intervention and requires no concern.
6
1
Share

What is the difference between the Q5 and Q5L?

Audi Q5 and Q5L have the following differences: 1. Different 0-100 km/h acceleration times: The Audi Q5 accelerates from 0-100 km/h in 7.2 seconds; the Audi Q5L does it in 8.6 seconds. 2. Different body dimensions: The Audi Q5 measures 4629mm in length, 1898mm in width, 1655mm in height, with a wheelbase of 2807mm; the Audi Q5L measures 4753mm in length, 1893mm in width, 1659mm in height, with a wheelbase of 2908mm. Below is additional information about the Audi Q5 and Q5L: Both the Audi Q5 and Q5L are equipped with a 2.0T turbocharged engine, use 95-octane gasoline, and feature a five-link independent front suspension.
1
4
Share

What is the fuel consumption of the GAC Honda Vezel?

Honda Vezel's fuel consumption per 100 kilometers is 6.0 to 6.3 liters. Below are the fuel consumption calculation formula and fuel-saving tips: Correct fuel consumption calculation formula: Fuel consumed ÷ Distance traveled × 100 = Fuel consumption per 100 kilometers. The data on fuel consumed is relatively difficult to obtain. Generally, a full tank is used as the initial data. After traveling a certain distance, the tank is filled again, and the fuel quantity provided by the gas station is taken as the final data. Fuel-saving tips: Idling for more than 1 minute consumes the same amount of fuel as starting the engine once. The fuel consumed by idling the engine for 5 minutes can allow the car to travel more than 1 kilometer.
13
0
Share

Can chain oil and chain wax be used together?

Chain oil and chain wax do not need to be used together; using one is sufficient. It is generally recommended to choose chain wax. If chain oil is used, it may splash around and dirty the wheel rims, whereas chain wax does not have this issue. The effects of chain wax and chain oil are the same. Below is an introduction to scooters: 1. How the scooter transmission system works: The principle of the transmission mechanism of a scooter is to connect two pulleys with a drive belt. When the engine is idling, the two pulleys and the drive belt are in a loose state and cannot drive the motorcycle forward. When the engine speed increases, the two pulleys, under the effect of centrifugal force, begin to connect tightly with the belt, and the gear ratio changes. The higher the engine speed, the greater the change in gear ratio, and the faster the vehicle speed. 2. Maintenance of the scooter transmission system: After the motorcycle transmission cover is closed, the air guide disk on the front pulley creates a directional airflow inside the transmission box. This serves two purposes: one is to dissipate heat from the transmission system, and the other is to blow out the dust generated during the operation of the transmission system from the transmission box to prevent excessive wear of the internal components.
1
3
Share

What should not be affected when driving a motor vehicle from the acceleration lane into the traffic lane?

Driving a motor vehicle from the acceleration lane into the traffic lane should not affect the normal driving of other motor vehicles. Below is relevant information: 1. Lane change precautions: When entering the traffic lane from the acceleration lane, observe the conditions in the traffic lane. Enter the traffic lane from behind normally moving vehicles when traffic is sparse. When following closely behind normally moving vehicles, control your speed and enter the traffic lane only after all vehicles have passed. Do not abruptly cut in from the middle. Always signal before changing lanes. Turn on the left turn signal in advance when turning left, changing lanes to the left, preparing to overtake, leaving a parking spot, or making a U-turn. Turn on the right turn signal in advance when turning right, changing lanes to the right, returning to the original lane after overtaking, or parking by the roadside. 2. Penalties for improper lane changes: Driving a motor vehicle on a highway or urban expressway without following the designated lane will result in a 3-point penalty. When encountering slow-moving or stopped vehicles ahead, overtaking by using the opposite lane or cutting in between waiting vehicles will result in a 2-point penalty. Additionally, violating road traffic safety laws and regulations regarding road usage may result in a warning or a fine ranging from 20 to 200 yuan.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.