What does the 'h' on car tires mean?

What happens if driving at 95 in an 80 speed limit zone with interval speed monitoring?

Deduct six points and impose a fine penalty. Here are the relevant details: Scoring Standards for Road Traffic Safety Violations: This is Attachment 4 document issued under Order No. 139 of the Ministry of Public Security of the People's Republic of China (Regulations on the Application and Use of Motor Vehicle Driving Licenses). Introduction to Point Deduction Substitution: Point deduction substitution refers to when a vehicle owner commits a traffic violation while driving, they pay money to purchase point deduction substitution services, allowing others to falsely claim that they borrowed the owner's vehicle when the violation occurred, thus having the substitute accept the driving license point deduction. In April 2021, the Ministry of Public Security drafted an open solicitation of opinions for the Road Traffic Safety Law. The proposed amendments explicitly stipulate penalties for point deduction substitution behaviors. Article 117 states that organizing others to substitute for the actual motor vehicle driver in accepting traffic violation penalties and point deductions for economic gain will result in confiscation of illegal earnings, detention for up to 15 days, and a fine ranging from one to five times the illegal earnings.

3

Share

What should be paid attention to when driving at high speed?

What should be paid attention to when driving at high speed: 1. Be clear about the driving lane, overtaking lane, and road signs. On the highway, the lane closest to the central divider is the overtaking lane. If you are not overtaking, do not stay in the overtaking lane for a long time. Generally, the far right lane is the emergency lane. Never overtake from the emergency lane, as it is very dangerous; 2. Pay attention to the driving speed. On the highway, slower is not necessarily safer. A speed of 80 to 100 kilometers per hour is relatively safe for small cars. If you drive too slowly, the car behind may not have enough time to avoid you, which can easily lead to a rear-end collision; 3. Use high beams when driving at night and turn on the left turn signal when overtaking; 4. When exiting the highway, pay attention to the exit. If you miss the exit, continue driving and exit at the next one. Remember not to reverse or make a U-turn; 5. Avoid driving while fatigued.

14

5

Share

What are the hazards of insufficient power supply from a car battery?

The hazards of insufficient power supply from a car battery include difficulty in starting, inability to start the vehicle, and weakened functionality of electrical equipment. Hazards of insufficient battery power supply: Causes unstable engine idling; reduces actual fuel injection quantity; weakens ignition energy, leading to failure to start; prevents the release of anti-theft alerts; locks the audio system; causes related systems to malfunction, and in severe cases, dims headlights or reduces horn volume. Car battery maintenance: Remember to turn off lights and audio before shutting down the engine: Drivers should ensure that lights and audio are turned off before parking and shutting down the engine. Leaving them on for extended periods increases the battery's burden and shortens its lifespan. Avoid long-term parking of the car: Cars should not be parked for long periods because prolonged inactivity leads to a gradual decrease in battery charge, which may result in difficulty starting the car when needed. Regularly clean the car battery: With prolonged use, the battery may accumulate dust, white powder, and other contaminants. To avoid affecting the battery's lifespan, use a damp cloth for regular cleaning and wiping to keep the battery's exterior as clean as possible. Conduct regular inspections of the car battery.

4

5

Share

What Are the Methods for Defrosting Cars in Winter?

There are several methods for defrosting cars in winter, including the warm air defrosting method, physical defrosting method, chemical defrosting method, and maintaining consistent temperatures inside and outside the car. Here are the details: 1. Warm Air Defrosting: The best method is to start the car and, once the engine coolant temperature rises, use the warm air to blow on the windshield until the ice melts. 2. Chemical Defrosting: In many markets and auto parts stores, there are stalls selling specialized anti-fog products, such as defrosting sprays or fog-resistant towels. Spray these defrosting agents onto the inner surface of the car glass and wipe them clean. While removing dirt from the glass, they also form a thin, transparent protective film that prevents moisture from condensing on the glass and forming a fog layer. One application can prevent fogging for about ten days to half a month. 3. Maintaining Consistent Temperatures Inside and Outside the Car: The reason the front windshield of a car is prone to icing in winter is due to the high temperature inside the car and the low temperature outside. To avoid this issue, it's simple: after parking, don't lock the car and leave immediately. Instead, open the doors to ventilate until the temperature inside the car is similar to the outside temperature before locking and leaving. This way, the windshield won't ice up the next morning.

19

0

Share

What Causes the Squealing Noise from Brake Discs That Then Disappears?

This is due to worn brake pads. When this occurs, new brake pads should be replaced. Brake pads are consumable parts in the braking system that require periodic replacement. As the vehicle's mileage increases, the brake pads will continuously wear down and need replacement once they reach a certain level of wear. Below is an introduction to related content: Introduction: The braking system is a crucial system in a vehicle, directly related to driving stability and safety. Main Components: The main components of the braking system include the vacuum booster pump, master cylinder, slave cylinder, brake pads, and brake discs. The vacuum booster pump provides assistance, making it easier for the driver to press the brake pedal. When the brake pedal is pressed, the master cylinder pushes the slave cylinder via brake fluid. At this point, the slave cylinder can press the brake pads against the brake disc, slowing the vehicle down. The brake disc is also a wear item that requires periodic replacement. As the vehicle's mileage increases, the brake disc will continuously wear down and need replacement once it reaches a certain level of wear. Precautions: The brake fluid in the braking system also needs regular replacement. Brake fluid is a liquid that easily absorbs moisture. If the brake fluid's water content becomes too high, it can lead to reduced braking force and longer braking distances. Therefore, it is essential to regularly replace the brake fluid during vehicle use. When the brake fluid's water content reaches 3%, it should be replaced immediately.

12

2

Share

What does it mean to replace an engine assembly?

Replacing an engine assembly means removing and replacing the entire engine. Engine assembly includes: Fuel supply and regulation system: Its main function is to provide the required fuel for mixture formation and combustion in the engine cylinders. Crankshaft and connecting rod mechanism: Its purpose is to convert the reciprocating motion of the pistons into the rotational motion of the crankshaft, changing the way force is applied, allowing the rotational power to be transmitted to the gearbox for proper distribution. Valve train and intake/exhaust systems: Based on the engine's combustion conditions, the valve train can appropriately adjust the amount of mixture supplied to the engine, maximizing combustion efficiency. The intake/exhaust systems automatically open and close valves for intake or exhaust. Lubrication and cooling systems: The lubrication system also lubricates internal components while the engine is running, while simultaneously transferring heat and dissipating some of the engine's heat. Pros and cons of replacing an engine assembly: The advantage of replacing an engine assembly is that it can provide superior power performance, and you can also make minor program adjustments according to your preferences to enhance the overall driving experience. The engine is a very complex instrument, and installation and matching must be done without any errors; otherwise, there will be certain safety hazards, potentially causing "secondary damage" to the entire vehicle. A slight mistake could lead to severe consequences, even fatal accidents.

11

5

Share

What does the 'h' on car tires mean?

What happens if driving at 95 in an 80 speed limit zone with interval speed monitoring?

What should be paid attention to when driving at high speed?

What are the hazards of insufficient power supply from a car battery?

What Are the Methods for Defrosting Cars in Winter?

What Causes the Squealing Noise from Brake Discs That Then Disappears?

What does it mean to replace an engine assembly?

Which car has pointed rearview mirrors?

What is the reason for the tachometer not moving after ignition?

Should You Press the Brake Directly in a Manual Transmission Car?

Is it illegal to put stickers on a car?