What does the GTE button on the Volkswagen Passat mean?

1 Answers
VanSienna
07/29/25 3:14pm
GTE button refers to the power switching button of hybrid models, and GTE is the suffix name of Volkswagen's plug-in hybrid models. Plug-in hybrid vehicles belong to new energy vehicles, which are different from ordinary hybrid vehicles. Plug-in hybrid vehicles can use external power sources to charge the power battery. Precautions for using the Passat GTE: 1. The dual-clutch gear lever of the Passat is located in the center position on the right side of the driver. The key to driving the Passat dual-clutch automatic transmission is the driver's reasonable operation. Before driving, it is necessary to adjust to a proper sitting posture. 2. When the vehicle needs to start, shift the gear into D gear. Note that after lifting the brake, adding a little throttle can help the vehicle start faster. If the vehicle requires low-speed high torque, the gear can be switched to S manual mode. 3. When parking or stopping, shift the gear into P gear and pull up the electronic handbrake. If the vehicle needs to be towed due to a malfunction, shift the gear into N gear to cut off the power.
Was this review help?
16
4
Share
More Forum Discussions

What to Do with Many Scratches on the Car?

Solutions for many scratches on the car: 1. For minor scratches, perform polishing. Use a polishing machine to gently polish the scratched area a few times, move it back and forth, then wipe it clean with a small towel, and the scratches will immediately fade significantly; 2. Use a touch-up pen to eliminate the scratches. Use a touch-up pen that matches the car body color, shake it well before use to ensure the paint is even, then gently dab it on the scratched area; 3. For very shallow scratches on the surface paint, you can use car wax for a full wax repair treatment. Wipe in straight lines, and after the scratches disappear, wipe with a finer compound and then apply wax. When waxing, choose high-quality wax, otherwise it won’t work and may even worsen the damage to the car paint.
11
1
Share

What is the installation method for the Baojun 530 footrest?

The installation method for the Baojun 530 footrest is: 1. Locate the mounting bracket holes on the vehicle chassis; 2. Secure the bracket with screws; 3. After fixing the bracket, loosen the nuts on the back of the footrest; 4. Place the footrest on the bracket, align the studs on the footrest with the holes on the bracket, and adjust the position of the footrest; 5. After adjusting the footrest, tighten all the screws. The 2020 Baojun 530 has dimensions of 4695mm in length, 1835mm in width, and 1750mm in height, with a wheelbase of 2750mm. The overall design continues the rugged and bold style, featuring a new dot-matrix star grille and a continuous LED 'Future Eye' daytime running light that appears dynamic and futuristic. It is equipped with a 1.5T turbocharged engine with a maximum power output of 108kW.
4
0
Share

How to Replace ETC?

ETC replacement is divided into two scenarios: changing the car but keeping the license plate, and changing both the car and the license plate. When the owner only changes the car but keeps the license plate, they should remove the ETC device and ETC card from the old car, bring their ID card and the new car's vehicle license to an ETC service outlet to complete the change procedures. After the ETC electronic tag is reactivated, the device can be installed on the new car's front windshield for continued use. When the owner changes both the car and the license plate, they need to remove the original ETC device, go to the issuing bank to cancel the service, and then apply for a new ETC for the new car after cancellation. How many ETCs can one person apply for: If a person owns only one car, they can apply for only one ETC. If a person owns multiple cars, they can apply for multiple ETCs.
6
1
Share

What is the emission standard of the 2013 New Santana?

2013 New Santana meets the China IV emission standard, which is the national fourth-stage standard for motor vehicle pollutant emissions. This standard controls and reduces vehicle emissions below specified limits through technologies such as improved catalytic converter active layers, secondary air injection, and exhaust gas recirculation systems with cooling devices. The 2013 New Santana features a family-style front fascia similar to the New Lavida and other models, with smooth and regular body lines, a simple yet enduring design. Its dimensions are 4473mm in length, 1706mm in width, and 1469mm in height, with a wheelbase of 2603mm. It comes equipped with comfort features including EPS electric power steering, automatic air conditioning, leather seats, and an electric sunroof, along with safety equipment such as ESP, front dual airbags, front side airbags, curtain airbags, cruise control, and rear parking radar.
12
0
Share

What brand is the Wrangler?

The Wrangler is a Chrysler Jeep brand vehicle, representing the top-tier version of the Chrysler Jeep Wrangler series. The Wrangler diesel variant is equipped with an all-new 2.8TD turbocharged direct-injection diesel engine, delivering a maximum power output of 147kW. Paired with this efficient powertrain is a 5-speed automatic transmission, complemented by the stable and reliable CommandTrac mechanical part-time four-wheel-drive system featuring an impressive 34:1 low-range crawl ratio. The Wrangler diesel model adopts the iconic seven-slot grille and round headlights, with design elements including a wide front bumper, trapezoidal wheel arches, removable roof and doors, fold-down windshield, and exposed hinges that embody the Jeep brand's persistence and resilience. The newly designed steering and suspension systems, meticulously calibrated, provide exceptional driving comfort.
16
0
Share

How to reset the maintenance light on the Great Wall VV7?

When resetting the maintenance light on the Great Wall VV7, it cannot be done manually. The only way to complete the reset is by modifying the maintenance parameters in the combination instrument. The specific method is to perform the maintenance reset directly at the service center using professional diagnostic equipment after maintenance or repair. Below are the relevant details: 1. The maintenance mileage interval for the Great Wall VV7 can be checked by pressing the buttons on the multifunction steering wheel to switch to the driving data interface. 2. By pressing the buttons on the steering wheel, you can switch to the driving data interface and find the maintenance mileage menu, where you can view the remaining mileage until the next maintenance. 3. When the maintenance mileage is due or overdue, the combination instrument will provide a reminder to the driver.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.