What does the green license plate on cars represent?

What are the symptoms of a broken scooter clutch shoe?

Scooter (rear) clutch shoe damage will not affect ignition, and there may not even be any abnormalities at idle. However, as the engine speed increases, the clutch will produce a severe and dull thumping sound (accompanied by noticeable bouncing). The reasons why a scooter frequently slows down and stalls are as follows: Clogged fuel filter screen: Insufficient fuel supply when accelerating leads to stalling. After stopping, gasoline flows into the float chamber, allowing the scooter to restart. However, when accelerating again, the carburetor fuel level drops, and the main jet cannot draw fuel, causing it to stall once more. Clogged carburetor main jet: This may be due to dirty gasoline or fuel deterioration from long periods of inactivity, forming gum that blocks the main jet. Slight cylinder expansion due to engine overheating: If the cylinder is expanded, it must be replaced along with the piston and piston rings at a repair shop.

8

0

Share

What does GT mean?

GT is generally referred to as high-performance sports cars. GT is translated into English as Grand-Tourer, where Grand means luxury, and Tourer means traveler or cruiser. Combined, Grand-Tourer is also known as a luxury touring car. More information about GT is as follows: The origin of GT: Long before cars existed in Europe, Grand-Touring referred to the carriage of large horse-drawn carriages used for long-distance travel. However, with the continuous evolution and changes of the times, horse-drawn carriages have long been replaced by cars. In the 1960s, cars were generally not capable of long-distance travel due to low mechanical reliability, leading to the emergence of a batch of high-performance, high-reliability, high-horsepower sports cars, which were called GT. The first GT car: The world's first car that could be called a "GT" sports car was the Alfa Romeo 6C-1750GT in 1929, which later won numerous honors, pioneered the "GT" sports car, and was written into the history of automobile development.

2

5

Share

Comparison between Saifu ABS and Bosch ABS

Saifu ABS is slightly better than Bosch ABS. Working principle of ABS: During braking, the ABS quickly determines the wheel lock-up state based on the speed signals from each wheel speed sensor, closes the normally open input solenoid valve on the wheel that begins to lock up, and keeps the braking force unchanged. If the wheel continues to lock up, the normally closed output solenoid valve is opened, causing the braking pressure on that wheel to drop rapidly due to the direct connection to the brake fluid reservoir, preventing the wheel from completely locking up due to excessive braking force. This keeps the braking state at the optimal point (slip ratio S of 20%), achieving the best braking effect and the highest driving safety. Functions of ABS: Maximize the effectiveness of the brake, shorten braking time and distance. Effectively prevent vehicle skidding and fishtailing during emergency braking, ensuring good driving stability. Allow steering during emergency braking, providing good steering control. Avoid severe friction between tires and the ground, reducing tire wear.

7

4

Share

What does 400cc mean?

Generally refers to heavy motorcycles with an engine displacement of 400cc or above. Powered by gasoline engines, these two-wheeled or three-wheeled vehicles are steered by handlebars controlling the front wheel. They are lightweight, flexible, fast-moving, and widely used for patrols, passenger and cargo transportation, and also serve as sports equipment. In China, motorcycles with displacements exceeding 400cc are generally referred to as heavy motorcycles. Below is additional information on how motorcycles work: Intake: At this stage, the intake valve opens, the piston moves downward, and the mixture of gasoline and air is drawn into the cylinder. Compression: At this stage, both the intake and exhaust valves close, the piston moves upward, and the mixture is compressed. Combustion: When the mixture is compressed to its minimum, the spark plug ignites the mixture, and the pressure generated by combustion pushes the piston downward and drives the crankshaft to rotate. Exhaust: When the piston reaches its lowest point, the exhaust valve opens, expelling the exhaust gases, and the piston continues to move upward to expel any remaining exhaust gases.

15

1

Share

Is the Mustang 3C certified helmet genuine?

Mustang 3C certified helmets are indeed qualified helmets. Helmets with 3C certification meet national standards and are safe and reliable, capable of minimizing accident-related injuries to the greatest extent. In contrast, other inferior helmets not only fail to provide protection but may also cause secondary harm to the driver. Below are the benefits of 3C certified helmets: Strong impact absorption performance: Every nationally certified helmet is born from hundreds of laboratory tests. Helmets bearing the 3C certification have a strong ability to absorb impact forces during collisions, thereby maximizing the reduction of head injuries. High penetration resistance: In addition to impact protection, another critical function of helmets is to resist penetration by sharp objects. For example, if a non-motor vehicle driver falls and a sharp object on the ground directly hits the head, the resulting injury would be a clear penetration wound. High-quality 3C helmets undergo rigorous penetration tests before leaving the factory. These tests involve dropping a 60-degree cone from a height of nearly 3 meters, and the results must show that the helmet is not penetrated.

14

3

Share

What does an overbored engine mean?

Overboring refers to the process of using a machine to finely grind the inner walls of the cylinder, allowing for an increase in size that varies depending on the vehicle. The cylinder can be enlarged as much as possible without grinding through it, and then pistons of corresponding sizes are installed. This is the ultimate method to increase horsepower, but it is not commonly used under normal circumstances. After grinding, the inner walls of the cylinder become locally thinner, leading to uneven pressure distribution within the cylinder, which makes it highly prone to cylinder explosion (also known as cylinder scoring). Below is an introduction to cylinder scoring repair: Cylinder replacement: If the cylinder scoring is severe and the remaining material on the cylinder walls exceeds the allowable machining tolerance, making it impossible to select suitable pistons and rings, the usual solution is to replace the cylinder, pistons, and rings as a complete set. Cause: In motorcycles, cylinder scoring occurs when the cylinder lacks lubrication and comes into abnormal close contact with the piston, resulting in a rough surface. When this phenomenon occurs in a motorcycle, not only does the power decrease, but it also leads to severe oil burning issues.

12

4

Share

What does the green license plate on cars represent?

What are the symptoms of a broken scooter clutch shoe?

What does GT mean?

Comparison between Saifu ABS and Bosch ABS

What does 400cc mean?

Is the Mustang 3C certified helmet genuine?

What does an overbored engine mean?

How to Deal with Foggy Windshield While Driving

Which tire is interchangeable with 2.75-14?

What is the difference between active and passive subwoofers?

What brand is ycrmotor?