What does the gear-shaped fault light on the Emgrand GS dashboard mean?

2 Answers
LaEvelyn
07/29/25 8:27am
The gear-shaped fault light on the Emgrand GS dashboard indicates a transmission system malfunction. Below are specific details about the Emgrand GS: 1. Powertrain: The Emgrand GS is equipped with either a 1.5TD-7DCT golden powertrain combination or a 1.4T-CVT high-efficiency powertrain combination, both complying with China's National VI-b emission standards. The 1.5TD turbocharged direct-injection engine delivers a maximum power of 130kW and peak torque of 255N·m, with a combined fuel consumption of just 6.1L/100km, paired with a 7DCT wet dual-clutch transmission. 2. Vehicle Positioning: Positioned as a compact SUV, the Emgrand GS measures 4440*1833*1560mm (L*W*H) with a wheelbase of 2700mm.
Was this review help?
15
1
Share
DelMolly
08/11/25 5:58pm
I've been driving my Emgrand GS for a while now, and whenever that gear-shaped warning light appears on the dashboard, my heart skips a beat. It usually indicates a transmission system issue - could be rough shifting, overheated fluid, or an electronic control module malfunction. The transmission is essentially the car's gear-shifting brain; when this light comes on, it's best not to push your speed too hard to avoid damaging components and incurring higher repair costs. Once on the highway when I saw this warning, I immediately slowed down and pulled into a service area for inspection - turned out to be low transmission fluid. My advice: pull over safely when you see this light, observe if gear changes feel jerky, then either use professional diagnostic tools to read trouble codes or schedule a dealership inspection. Never ignore small warnings - they can prevent major breakdowns or costly repairs. Regular maintenance including transmission fluid and filter checks helps prevent such issues. Remember: safety first is always the right approach.
Was this review help?
18
5
Share
Expand All
More Forum Discussions

What is the function of the car rear?

The car rear function is for rear window defrosting and defogging. Pressing it can remove fog from the rear windshield. Typically, a button labeled with this word appears on the air conditioning control panel. Generally, this button also has a symbol, which is a rectangle with three upward wavy lines inside. When the rear windshield fogs up or there is heavy snow accumulation on the outside of the rear windshield, the owner can activate this button. The rear windshield contains many horizontal heating wires that start heating to remove fog and snow from the glass, ensuring the owner's driving safety. For some higher-end vehicles, this button has an additional function: rearview mirror heating. When this button is activated, vehicles equipped with rearview mirror heating will also start heating the rearview mirror lenses.
16
5
Share

How to Fix Uneven Heating in BMW 5 Series?

To resolve the issue of uneven heating in BMW 5 Series, follow these steps: 1. After starting the engine, press the 'off' button on the BMW 5 Series air conditioning system to turn it on; 2. Press the 'AC' button to turn off the cooling function; 3. Adjust the two temperature control knobs on the right side accordingly. The BMW 5 Series is a mid-to-large-sized sedan under BMW Brilliance, with body dimensions of 5106mm in length, 1868mm in width, and 1500mm in height, a wheelbase of 3105mm, and a fuel tank capacity of 68 liters. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 184PS, a maximum power of 135kW, and a maximum power speed ranging from 5000 to 6500 rpm, paired with an 8-speed automatic transmission.
20
5
Share

What is the fuel consumption of the 4.0 Prado?

4.0 Prado has an average fuel consumption of 14L/100km. Below is more information about vehicle fuel consumption: 1. Definition of fuel consumption: Fuel consumption generally refers to constant-speed fuel consumption, which is the vehicle's fuel consumption per 100 kilometers obtained in constant-speed driving fuel consumption tests specified by national standards for certain types of vehicles. 2. Factors affecting fuel consumption: There are many factors that affect a car's fuel consumption, such as driving habits, road conditions, vehicle load, etc. Different vehicle models can also have an impact, and even for the same model, fuel consumption may vary. Therefore, the actual fuel consumption of a vehicle is not fixed. 3. Ways to reduce fuel consumption: Avoid prolonged idling or low-speed driving, avoid overloading the vehicle, and keep the fuel tank from being full.
15
3
Share

How much does the Jinbei 2.0 cost per kilometer in fuel consumption?

Jinbei 2.0's comprehensive fuel consumption is generally around six to seven jiao per kilometer. Below is more information about Jinbei vehicles: 1. Overview: The predecessor of Huachen Jinbei Automobile Co., Ltd. was Shenyang Jinbei Passenger Vehicle Manufacturing Co., Ltd., which officially changed its name in January 2003. It is a key production enterprise under Brilliance China Automotive Holdings Limited. Shenyang Jinbei Passenger Vehicle Manufacturing Co., Ltd. is a joint venture established by Brilliance China Automotive Holdings Limited and Shenyang Jinbei Automobile Co., Ltd., founded on July 22, 1991. 2. Main Products: The company's main products include various light vehicle transmissions, front and rear axle assemblies, leaf spring assemblies, torsion bar spring assemblies, clutch assemblies, steering gear assemblies, light vehicle frame assemblies, wheel assemblies, brake pump assemblies, and fuel tank assemblies, totaling 29 categories and 130 varieties.
17
4
Share

What Causes the Brake Pedal to Feel Very Hard When Pressed?

There are several reasons why the brake pedal may feel very hard when pressed: 1. Vacuum booster pump leakage or malfunction: While driving, when applying the brakes via the brake pedal, the force exerted on the pedal needs to be amplified by the brake booster pump to achieve the braking effect. If the car's brake booster pump fails, pressing the brake pedal becomes difficult, and without the assistance of the booster pump, the brake pedal will feel very hard. 2. Booster pump failure after engine shutdown: If you notice that the brake pedal feels very hard or even immovable after the car is turned off, it is because the vacuum booster pump loses its vacuum when the engine is off. If you find that the brake pedal cannot be pressed after stopping the car, you can restart the vehicle to resolve this issue.
3
2
Share

How to open the door of the Bestune T77 with the key?

Method to open the door of the Bestune T77 with the key: Pull out the mechanical key from the remote key, directly locate the keyhole on the driver's side door handle or pry open the keyhole cover, insert the key and turn it to the right to unlock the door. Taking the 2020 Bestune T77 PRO 280TID Manual Luxury model as an example, its dimensions are 4525mm in length, 1845mm in width, and 1615mm in height, with a wheelbase of 2700mm. In terms of power, the 2020 Bestune T77 PRO 280TID Manual Luxury model is equipped with a 1.5L inline 4-cylinder turbocharged engine, delivering a maximum power of 124kW and a maximum torque of 258Nm, paired with a 6-speed manual transmission, and features front-wheel drive.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.