What does the fuel gauge indicator symbol 'ef' represent?

1 Answers
DelLeilani
07/30/25 6:23am
The fuel gauge indicator symbol 'ef' represents the fuel level in the tank. 'e' is the abbreviation for 'empty', indicating an empty tank. When the fuel gauge needle points to 'e', the dashboard will illuminate the fuel warning light to remind the driver that the fuel is running low and needs to be refueled. 'f' is the abbreviation for 'full', indicating a full tank. When the tank is filled with fuel, the needle will point to 'f'. The fuel gauge is used to indicate the fuel level in the vehicle's fuel tank, which can be either a pointer type or a digital display. The fuel gauge consists of a fuel level indicator with a voltage regulator and a fuel level sensor. The low fuel level warning device is designed to illuminate immediately when the fuel in the tank falls below a certain specified level, alerting the driver to the situation.
Was this review help?
18
1
Share
More Forum Discussions

What to Do About Noise from the Front Passenger Seat of the Buick Verano?

Solution: Remove the inner door panel for further inspection and maintenance. If the noise is caused by loose screws, simply tighten them; if the clips are damaged, replace them with new ones. Noise from the front passenger seat of the Buick Verano is usually due to loose screws or damaged clips inside the inner door panel. More information about the Buick Verano is as follows: 1. The Buick Verano is a mid-size sports sedan from SAIC-GM Buick. As a new-generation global strategic model for Buick, the Verano integrates GM's global advantages and resources to create a unified GM product. 2. The Buick Verano combines a stylish and dynamic exterior, a refined and comfortable driving space, and precise and agile performance. 3. The Buick Verano offers a new driving experience for the next generation of elites. The Buick Verano made its global debut in 2015 as a strategic model; the all-new Buick Verano was launched in 2019, further enhancing its "Born to Run" dynamic genes.
13
2
Share

Where is the cabin air filter located in the 2011 Tiida?

2011 Tiida cabin air filter is located in the glove compartment in front of the passenger seat. Additional information about the 2011 Tiida cabin air filter is as follows: 1. The 2011 Tiida cabin air filter purifies the air entering the vehicle interior from outside, improving air cleanliness and preventing windshield fogging. It typically filters impurities in the air such as microscopic particles, pollen, bacteria, industrial exhaust, and dust. The purpose of the cabin air filter is to prevent these substances from entering the AC system, thereby protecting the system and providing occupants with a clean air environment that safeguards their health. 2. When the 2011 Tiida AC has weak airflow during cooling or heating, but the AC system is functioning normally. Cause: Poor ventilation efficiency of the cabin air filter or prolonged usage. Solution: The cabin air filter needs to be replaced promptly. 3. When the 2011 Tiida AC emits unpleasant odors. Cause: The AC system hasn't been used for an extended period, leading to dampness and mold in the internal system and cabin air filter. Solution: Clean the AC system and replace the cabin air filter.
13
2
Share

What are the reasons why the trunk of the BMW X6 cannot be opened?

The trunk of the BMW X6 cannot be opened because it was not properly closed the last time it was shut. Here are some details about the BMW X6: 1. The BMW X6 trunk features an electronic lock. If not properly closed, vibrations can generate two erroneous electronic signals in the ECU, preventing the trunk lid from opening normally via remote control. This issue can be resolved by visiting a 4S dealership to clear the fault codes. 2. The BMW X6 boasts a standardized SUV physique, with a tall body and considerable ground clearance. 3. The introduction of the BMW X6 emphasizes the comfort of a sedan and the high performance of a sports car. BMW has incorporated the respective strengths of the X5 and the 6 Series sports car into the X6.
19
5
Share

What transmission is used in the Audi A1?

The Audi A1 uses a 7-speed dual-clutch transmission. Here are some details about dual-clutch transmissions: 1. A dual-clutch transmission is developed based on a manual transmission, with an additional set of clutch and shift control mechanism compared to a manual transmission. 2. In a dual-clutch transmission, one clutch controls the odd-numbered gears, while the other controls the even-numbered gears. Dual-clutch transmissions can be divided into the following two types: 1. Dry-type: The clutch plates in a dry dual-clutch transmission are not immersed in transmission oil. This type of dual-clutch transmission can handle relatively small torque and has average reliability and durability. 2. Wet-type: The clutch plates in a wet dual-clutch transmission are immersed in transmission oil. This type of transmission can handle larger torque and offers better reliability and durability.
3
3
Share

What is the original tire brand of the Haval H6?

2022 Haval H6 comes with Cooper brand tires in the size specification of 225/65R17, model DiscovererHTS. Cooper tires hold a high reputation in the SUV tire sector, known for their excellent off-road performance. Their main advantages lie in comfort, quietness, and handling, which have proven to be quite satisfactory. Introduction to tire maintenance: 1. Develop a habit of regular tire inspections; check the tires before each use of the car and choose an appropriate time weekly for regular inspections. Address any issues promptly to eliminate safety hazards. 2. Maintain appropriate tire pressure; the normal tire pressure for small cars is 2.3-2.5bar. Tire pressure should not be too high, as it can cause the tire to stretch and deform, reducing elasticity and increasing the load on the car during driving. Similarly, tire pressure should not be too low, as insufficient pressure can reduce the tire's load-bearing capacity, decrease durability, increase driving resistance, and lead to higher fuel consumption. 3. Regularly clean debris from tire treads; driving on roads can lead to small stones, twigs, and fragments getting lodged in the tire treads. If not cleaned for a long time, these can cause significant damage to the tires. 4. Periodically check tire wear; tire wear can be judged by the tread pattern. Tires have tread wear indicators, and when the tire wears to a certain extent, the tread will show indicator bars, signaling the need for replacement. Severely worn tires should not be used as they have reduced grip and are prone to slipping, posing significant safety risks.
20
4
Share

What are the methods to reset the maintenance light on Santana?

New Santana maintenance light reset method is as follows: 1. Turn off the ignition switch and stop the engine. 2. Press and hold the right button (reset) on the dashboard with your left hand. 3. While continuing to hold the right button with your left hand, turn on the ignition switch. 4. Keep holding the "reset" button until the maintenance light enters the reset mode, then release the right button (reset button). 5. Within 20 seconds of releasing the right button, press the left "menu button" once to confirm the reset. Following the above steps will reset the maintenance cycle indicator light to the regular display mode.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.