···
Log in / Register

What Does the Fourth Car Maintenance Include?

3 Answers
LeTaylor
07/28/25 11:46am
The fourth car maintenance includes the following items: 1. Replace the engine oil, oil filter, clean the air filter, and check whether the generator belt and wiper blades are damaged; 2. Check whether the levels of various fluids are normal; 3. Check whether the tire pressure is normal and whether there is uneven wear, bulging, or damage on the tires; 4. Inspect the car chassis, including checking for any scratches on the brake pads, brake discs, connecting rods, ball joints, and CV joints; 5. Check whether all switches and lights in the car are working properly. The fourth car maintenance refers to the maintenance when the car's mileage reaches 20,000 kilometers. The precautions for maintenance are: 1. Make an appointment in advance; 2. Record any faults or questions encountered during daily driving and inform the staff during the maintenance registration.
Was this review help?
8
1
Share
LaHannah
08/11/25 4:39pm
The fourth maintenance is usually done when the car has run 20,000 kilometers or been in use for about two years. I've driven several cars, and the most crucial part is changing the engine oil and oil filter to protect engine lubrication. The air filter should also be checked or replaced—it filters out dust, allowing the engine to breathe smoothly. Next, rotate the tires to balance wear and extend their lifespan, and check if the tire pressure meets the standard. The braking system must be inspected carefully, including the thickness of the brake pads and the condition of the brake fluid, to avoid accidents while driving. Lights should be adjusted to ensure safe nighttime driving. Check the coolant level, and the spark plugs might need replacement—refer to the manual for specifics. Don’t forget to inspect the chassis and suspension components for any looseness or damage. I recommend going to a professional shop—they can test battery voltage and clear fault codes, preventing minor issues from becoming major ones. The whole process takes about one or two hours. Proper maintenance keeps the car running smoothly, saving fuel and ensuring safety.
Was this review help?
18
2
Share
Expand All
SanIsabela
09/28/25 5:52am
I just had my fourth maintenance service, which cost over 300 yuan. The main items included changing the engine oil—I opted for synthetic oil for better cleanliness; replacing the oil filter to remove all the impurities; and swapping out the air filter to ensure smooth airflow for the engine. The tires were rotated to ensure even wear, and the mechanic also adjusted the tire pressure. The brake fluid level was checked and found to be fine. The lights were adjusted to ensure all bulbs were working, preventing accidents at night. A small amount of coolant was topped up to keep the system running smoothly. The manual mentioned that spark plugs might need replacement at some point, but my car hasn’t reached that stage yet. The whole process was done at a 4S shop, which was hassle-free. Car owners should develop the habit of regular maintenance to save on repair costs and extend the vehicle’s lifespan.
Was this review help?
8
4
Share
Expand All
More Forum Discussions

What is the function of the clutch in learning to drive?

The function of the clutch is: 1. To allow the vehicle to start smoothly: Pressing the clutch pedal separates the engine from the transmission, meaning the engine runs without driving the vehicle. Engaging a low gear (such as first gear) and gradually releasing the clutch pedal allows the engine and transmission to gradually connect, transferring power to the wheels and enabling the vehicle to start smoothly. Without a clutch, engaging a gear would directly transfer the engine's power to the wheels, causing the engine to stall due to the inability to suddenly accelerate the vehicle from a standstill, while also damaging the transmission components. 2. To ensure smooth gear shifting: Shifting from first gear to second gear without a clutch would directly connect the transmission to the engine, causing a sudden drop in engine speed during the shift. This immense force would damage both the engine and the transmission gears. By pressing the clutch during gear shifting, the engine and transmission are separated, allowing the transmission to change gears without load. After completing the shift, gradually releasing the clutch reconnects the engine and transmission, continuing power transfer to the wheels, thus enabling smooth gear changes. 3. To prevent overload of the drivetrain: During emergency braking, without a clutch, the engine would sharply reduce speed due to its rigid connection with the drivetrain. This would generate significant inertial torque (potentially exceeding the engine's maximum torque under normal operation), subjecting the drivetrain to excessive loads beyond its capacity and damaging components. The clutch mitigates this risk by allowing relative movement between its driving and driven parts, thereby limiting the maximum torque the drivetrain must endure and ensuring safety.
9
0
Share

Is the Automatic Transmission License Test Easy?

Automatic transmission license tests are generally simpler compared to manual transmission license tests. Operating an automatic transmission vehicle is straightforward, involving only the accelerator and brake pedals. Below is relevant information about automatic transmissions: 1. Gear Distribution: A typical automatic transmission vehicle has six gear positions, arranged from top to bottom as: P, R, N, D, S, L. 2. Automatic Principle: The engine's power is transmitted through the gearbox, which is also a key factor affecting fuel consumption. Generally, automatic transmissions consume over 10% more fuel than manual transmissions. Whether manual or automatic, more gears typically mean better fuel efficiency.
16
5
Share

What are the reasons why a motorcycle has electricity but won't start?

The reasons why a motorcycle has electricity but won't start are: 1. Insufficient battery power. 2. Mechanical failure of the motorcycle engine or malfunction in the fuel system or carburetor. 3. If the spark plug is flooded or damaged, it cannot ignite normally and the motorcycle won't start. 4. The fuel tank may be empty or the fuel tank switch may be blocked. The differences between blue and yellow license plates for motorcycles: 1. Different displacement: Motorcycles with a displacement above 50CC have yellow plates, while those with a displacement of 50CC or below have blue plates. 2. Different driving licenses: Yellow-plated motorcycles require an E-class license, while blue-plated motorcycles require an F-class license. 3. Different passenger capacities: Yellow-plated motorcycles can carry a maximum of two people, including the driver, as per regulations; blue-plated motorcycles can only be ridden by the driver alone and cannot carry passengers.
7
2
Share

What Causes High Temperature Failure in Electric Vehicle Batteries?

Electric motors can generate heat during prolonged high-speed operation of electric vehicles. Below is relevant information about new energy vehicles: 1. Vehicle Types: New energy vehicles encompass four major categories - hybrid electric vehicles, pure electric vehicles (including solar-powered vehicles), fuel cell electric vehicles, and other new energy vehicles (such as those using supercapacitors or flywheels as high-efficiency energy storage devices). 2. Reasons for Promoting New Energy Vehicles: The promotion of new energy vehicles aims to address environmental protection needs and petroleum crisis concerns, reducing or abandoning the current mainstream models that rely on traditional gasoline or diesel-powered internal combustion engines.
5
3
Share

What Does Unstable Chassis Mean?

It refers to the poor tightness of components in the steering and running parts, making the running parts relatively loose. Below is the relevant introduction: 1. Chassis: The chassis refers to the combination of the transmission system, running system, steering system, and braking system in a vehicle. It supports and installs the engine and its various components and assemblies, forming the overall shape of the vehicle, bearing the engine's power, and ensuring normal operation. 2. Function: The role of the chassis is to support and install the engine and its various components and assemblies, forming the overall shape of the vehicle, receiving the engine's power to generate motion, and ensuring normal operation. At the same time, a good chassis can ensure the driver's safety.
19
1
Share

Can Electric Vehicles Coast in Neutral Gear?

Although pure electric vehicles can coast in neutral gear for a period of time, the power battery does not output electricity during neutral coasting. Here is relevant information: 1. Vehicle Types: New energy vehicles include four major categories: hybrid electric vehicles, pure electric vehicles (including solar-powered vehicles), fuel cell electric vehicles, and other new energy vehicles (such as those with supercapacitors, flywheels, and other high-efficiency energy storage devices). 2. Reasons for Promoting New Energy Vehicles: The promotion of new energy vehicles is aimed at addressing environmental protection and oil crisis needs, reducing or abandoning the current mainstream models that burn traditional gasoline or diesel to drive internal combustion engines.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.