What does the four-wheel drive power distribution ratio mean?

1 Answers
DeClaire
07/30/25 1:21am
Four-wheel drive power distribution refers to the ratio of power between the front and rear axles of a four-wheel drive vehicle. Meaning of four-wheel drive power distribution: Generally speaking, four-wheel drive power distribution refers to the ratio of power between the front and rear axles of a four-wheel drive vehicle. Therefore, a 50:50 power distribution can be understood as 50 percent for the front and 50 percent for the rear. That is, 50 percent of the engine power is distributed to the front axle, and the other 50 percent is distributed to the rear axle, thereby achieving the effect of equal power output on the front and rear axles. Principle of four-wheel drive power distribution: The four-wheel drive system can simply be understood as connecting the front and rear wheels through a drive shaft, allowing all four wheels to simultaneously receive the driving force distributed by the engine, thereby propelling the entire vehicle forward. For automobiles, the advantages of a four-wheel drive system are nothing more than two points: first, it provides more comprehensive passability and superior off-road and escape capabilities; second, it enhances the vehicle's handling and stability to a certain extent.
Was this review help?
1
3
Share
More Forum Discussions

Is the Chevrolet Tracker a Three-Cylinder?

The Chevrolet Tracker is a three-cylinder vehicle, equipped with a 1.3-liter turbocharged engine. The engine is the device that provides power to the car, determining its power, fuel efficiency, stability, and environmental friendliness. The 1.3-liter turbocharged engine in the Chevrolet Tracker delivers 165 horsepower and a maximum torque of 240 Nm. This engine can output its maximum power at 5600 rpm and features direct fuel injection technology, along with an aluminum cylinder head. The Chevrolet Tracker is a compact SUV with the following body dimensions: length 4411mm, width 1803mm, height 1633mm, and a wheelbase of 2640mm.
16
2
Share

Is it safe to drive with a tire pressure of 185?

A tire pressure of 185 is not safe for normal driving. Low tire pressure increases the contact area between the tire and the ground, leading to abnormal temperature rises inside the tire during driving. Additionally, severe deformation of the tire sidewall accelerates the aging of internal steel wires and fabric layers, increasing the risk of a blowout. It also raises fuel consumption and reduces tire lifespan. Factors affecting vehicle tire pressure include: 1. Seasonal factors: In winter, it's advisable to slightly increase the tire pressure by about 0.2 bar based on the standard tire pressure. In summer, adhere to the lower limit of the standard tire pressure; for vehicles parked outdoors, the pressure can generally be about 0.1 bar lower than the standard to prevent blowouts due to high temperatures. 2. Load conditions: For empty or half loads, use the lower limit of the standard tire pressure (the tire pressure indicated on the vehicle's sticker can serve as a reference for the minimum pressure). For full loads, use the upper limit of the standard tire pressure (the maximum pressure marked on the tire can be a reference for the theoretical maximum pressure). 3. Tire pressure measurement environment: Cold and hot tires have different pressures, with a difference of about 0.3 bar, so measurement should be done accordingly. 4. Road conditions: On rough roads, it's appropriate to slightly decrease the tire pressure by 0.1-0.2 bar from the standard. For long-distance high-speed driving, the tire pressure should not be too low; it's advisable to slightly increase it by about 0.2 bar from the standard lower limit.
15
3
Share

What Causes Engine Backfire?

Engine backfire can be caused by: 1. Slow combustion of the air-fuel mixture; 2. Incorrect ignition sequence; 3. Low battery voltage; 4. Faulty coolant temperature sensor or air flow meter; 5. Excessive ignition advance angle; 6. Incorrect valve timing; 7. Excessive carbon buildup on valves; 8. Misfiring spark plugs. The main components of an engine include: 1. Valve train; 2. Crankshaft and connecting rod assembly; 3. Ignition system; 4. Cooling system; 5. Lubrication system; 6. Starting system; 7. Fuel supply system. The functions of an engine are: 1. Generating power by fully combusting fuel in the cylinders; 2. Determining vehicle performance, fuel efficiency, stability, and environmental friendliness.
5
4
Share

Which country does the MG6 brand belong to?

MG is a British brand, and the MG6 is one of its models. Its production line was transformed from the original British Rover production line, and the engine is largely based on the original British Rover K-series engine, with some modifications and adjustments made domestically. Taking the 2020 MG6 as an example, it is a compact car with body dimensions of: length 4704mm, width 1848mm, height 1466mm, and a wheelbase of 2715mm. The fuel tank capacity is 50 liters. The 2020 MG6 features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 181 PS, a maximum power of 133 kW, and a maximum torque of 285 Nm. It is paired with a 6-speed manual transmission.
9
5
Share

What are the differences between the Golf R-Line and the regular Golf?

The differences between the Golf R-Line and the regular Golf are: 1. Different styles: The Golf R-Line follows a fashionable and sporty style; the regular Golf adopts a simple and plain style. 2. Different appearances: The Golf R-Line uses LED headlights, while the regular Golf uses halogen lights. 3. Different powertrains: The Golf R-Line is equipped with the EA211 series 1.4T high-power engine, paired with a 5-speed manual or 7-speed dual-clutch transmission; the regular Golf is equipped with a 2.0L TSI engine, paired with a 6-speed dual-clutch transmission.
6
1
Share

What is the fuel consumption per 100 kilometers of the Jianghuai Jiayue A5?

The fuel consumption per 100 kilometers of the Jianghuai Jiayue A5 is 7.4 to 7.5 liters. The fuel consumption per 100 kilometers refers to the fuel consumption of a vehicle traveling 100 kilometers at a certain speed on the road, which is a theoretical indicator of the vehicle. Taking the 2020 Jianghuai Jiayue A5 as an example, its body dimensions are: length 4772mm, width 1820mm, height 1492mm, wheelbase 2760mm, fuel tank capacity 55 liters, and curb weight 1432kg. The front suspension of the 2020 Jianghuai Jiayue A5 is a MacPherson independent suspension, and the rear suspension is an E-type multi-link independent suspension. It is equipped with a 1.5T turbocharged engine, with a maximum horsepower of 150PS, a maximum power of 110kW, a maximum torque of 210Nm, and is paired with a 6-speed manual transmission.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.