···
Log in / Register

What Does the Fog Light Symbol Look Like?

4 Answers
Norma
08/29/25 6:14am
Front fog lights have three diagonal lines on the left, crossed by a curved line, and a semi-oval shape on the right, while the rear fog lights are the opposite. More information about fog lights is as follows: 1. Fog lights are highly bright and have strong penetration power, preventing diffuse reflection caused by fog, so correct usage can effectively prevent accidents. 2. In foggy conditions, front and rear fog lights are usually used together. 3. The yellow fog lights of a car can penetrate thick fog and reach far distances. However, due to backscattering, when the following driver turns on the headlights, it increases the background intensity, making it harder to see the vehicle ahead.
Was this review help?
12
4
Share
LaAnastasia
09/11/25 3:56am
I've been driving for over a decade and remember the fog light symbols clearly. The front fog light symbol on the dashboard shows a lamp on the left side tilting downward with slight wavy lines, resembling illumination on the road ahead. The rear fog light symbol is on the right side, with the light beam pointing upward more directly, somewhat like a warning to others about your position. The button to activate fog lights is usually located near the center console or steering wheel—just press the key with a similar pattern, and the symbol will light up to indicate operation. Using fog lights is crucial in foggy conditions to enhance visibility, but avoid keeping them on during clear weather as they can be too bright and disturb others. Remember to regularly check if the lights are functioning properly; for example, if a bulb is burnt out, the symbol won't illuminate. Safe driving should never be taken lightly.
Was this review help?
17
2
Share
Expand All
AshleyFitz
10/25/25 4:44am
Hey, the first time I noticed the fog light symbol while driving my dad's car, it was like a little hint: the front fog light is a lamp pattern bending downward with a slight curve; the rear fog light is on the right side of the screen, with the light pointing straight upward. When turned on, the symbol lights up, and I know I'm much safer. The button location may vary by car—mine is next to the gear shift, just press it once. Driving in fog without lights is really dangerous; I almost had an accident once, but with them on, visibility improved a lot. The symbol's appearance is important to avoid misoperation, so make it a habit to glance at it before every drive. Simply understanding these details can make daily driving much more reassuring.
Was this review help?
7
3
Share
Expand All
McPenelope
12/08/25 5:08am
When I was changing to a new car, I learned about the fog light symbols: the front fog light is represented by a downward-curving light pattern; the rear fog light has a straight upward light style. When the activation button is pressed, the symbol lighting up indicates normal operation. Using them properly can enhance safety in foggy conditions.
Was this review help?
6
1
Share
Expand All
More Forum Discussions

Should You Shift to Neutral at a Red Light with an Automatic Transmission?

When waiting at a red light with an automatic transmission car, it is recommended to shift to neutral. If the wait is longer, you can also engage the handbrake. Here are the relevant details: 1. In situations like waiting at traffic lights, traffic jams, or picking up passengers where temporary parking is required, many drivers are accustomed to the "D gear + brake pedal" method. However, this habit is not ideal. If the parking time is short (e.g., within 20 seconds), the gear lever can remain in D position while only pressing the brake pedal. 2. For slightly longer waits, it is best to use "N gear + handbrake" to reduce driver fatigue and prevent the automatic transmission fluid from overheating, which could affect its quality.
9
5
Share

How to Remove Odor from a New Car?

Here are quick methods to eliminate odors from a new car: 1. Use bamboo charcoal bags, which have strong odor-absorbing capabilities and are both long-lasting and fast-acting; 2. Develop the habit of opening doors and windows before driving to allow circulating air to dilute and disperse toxic gases inside the cabin, and try to keep windows open as much as possible while driving; 3. Use fruit peels, such as pomelo and lemon, which also have odor-removing effects. Additional information: The reason for odors in new cars is the inclusion of various materials during manufacturing, such as leather, plastic panels, soundproofing cotton, adhesives, and asphalt. These materials often contain odors like formaldehyde, which accumulate in the confined space of the car. Poor air circulation makes it difficult for the odors to dissipate, resulting in a pungent smell when entering the car.
18
3
Share

What does BCM mean in automotive circuits?

Automotive BCM refers to the Body Control Module, which primarily controls the electrical appliances in the vehicle body, such as the entire vehicle's lighting system, wipers, washers, door locks, power windows, sunroof, power mirrors, and remote control. The following are the functions of the automotive BCM: 1. Receives input information from sensors and converts the input information into signals that the microprocessor can receive; 2. After outputting execution commands, converts weak signals into execution commands and corrects them after outputting fault information; 3. Performs operational analysis, calculates execution command data based on information parameters, and compares the input information with standard values; 4. Stores, calculates, analyzes, and processes information, analyzes the programs used for output values, stores the characteristic parameters of the vehicle model, data during calculations, and fault information.
9
3
Share

Where is the Ford Transit cabin air filter located?

Ford Transit cabin air filter is located behind the glove box on the passenger side. To replace the cabin air filter, you need to remove the passenger side glove box - this is the only way to access and replace the filter. Below are the functions of the Ford Transit cabin air filter: 1. Ensures the filter fits tightly against the housing to prevent unfiltered air from entering the cabin. 2. Filters out solid impurities from the air such as dust, pollen, and abrasive particles. 3. Adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc. from the air; has strong and lasting moisture adsorption capability. 4. Prevents windshield fogging to maintain clear visibility for safe driving; provides fresh air to the cabin to protect occupants from inhaling harmful gases; effectively sterilizes and deodorizes.
8
2
Share

What Causes Soft Brakes in Paladin?

Reasons for soft brakes in Paladin: Brake fluid contamination: If there is no brake fluid as the medium, or if the brake fluid's working performance is poor, it will result in insufficient friction between the brake pads and brake discs, leading to soft and ineffective braking. Air gap formation: Since brake fluid has certain hydrophilic properties, the longer the car is driven, the more water gets mixed in. After the water evaporates, an air gap forms between the brake pads and brake discs, causing soft and ineffective braking. Decreased reservoir fluid level: Each time the brake pedal is pressed, the fluid level in the brake fluid reservoir drops, and it rises again when the pedal is released. To ensure smooth fluid level changes, some vehicle models have vent holes in the reservoir cap (similar to the principle of vent holes in automatic transmissions, manual transmissions, and axles).
8
5
Share

What Causes the Skoda Octavia Dashboard Brake Light to Flash?

Skoda Octavia dashboard brake light flashing reasons are as follows: Low brake fluid: It is an essential part of the car's braking system. When the driver presses the brake pedal, the force is transmitted from the pedal to the brake master cylinder piston, through the brake fluid, to the brake calipers at each wheel, causing the brake pads to contact the wheels and stop the vehicle; add brake fluid. Tail light bulb failure: The brake fluid reservoir has upper and lower lines. When the brake fluid level falls below the lower line, the sensor next to the reservoir detects this and triggers the brake light on the dashboard. If the brake fluid level drops rapidly, it indicates a leak in the braking system; replace the bulb. Worn brake pads: Severely worn brake pads can also cause the light to stay on; replace the brake pads.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.