What Does the First Maintenance of a Motor Vehicle Include?

How to Observe Reference Points for Curve Driving in Driving Test Subject 2?

Driving Test Subject 2 curve driving reference point observation methods are as follows: 1. After entering the S-curve, pay attention to observe. When the hood overlaps with the right-side curve, steer one full turn to the left; 2. As the vehicle continues forward, when the left front of the car overlaps with the right-side curve, steer half a turn to the left, then make slight adjustments to keep the front of the car always overlapping with the curve; 3. Before entering the right curve, observe carefully. When the left front of the car aligns with the left-side curve, straighten the steering wheel; 4. When the vehicle enters the right curve, and one-third of the left front hood aligns with the curve, steer one full turn to the right; 5. Continue observing. When the right front of the car overlaps with the left-side curve, start steering half a turn to the right, then make slight adjustments to keep the front of the car always overlapping with the left-side curve; 6. Exit the curve driving with the front of the car straight and the steering wheel centered.

8

0

Share

What is the actual fuel consumption of the 2007 Odyssey 2.4?

The average fuel consumption of the 2007 Odyssey 2.4 with automatic transmission is 10.19L/100km, but normal fuel consumption should be based on actual usage as it is related to multiple factors. The main factors include the following situations: 1. Cold start: When starting a cold engine, do not artificially extend the warm-up time, as it will have the opposite effect. Just pay attention not to drive at high speed immediately after ignition. You should drive slowly for a few minutes and then gradually increase the speed. In winter, the slow driving time can be extended slightly. 2. Incorrect driving: Improper driving habits have the greatest impact on fuel consumption. During driving, especially in heavy traffic, at red lights, or when changing lanes, sudden acceleration and hard braking are the most common issues. Experts conducted fuel consumption tests during acceleration driving. After the vehicle entered the test section at a constant speed, the test driver fully pressed the accelerator to complete the specified distance. It was found that fuel consumption increased by 2 to 3 times compared to driving at a constant speed.

3

Share

How Many Kilometers for the Break-in Period of a Family Car?

A new car is considered to have passed its break-in period after traveling 5,000 kilometers. Generally, the first 5,000 kilometers of a new car are regarded as the break-in period. Engine considerations during break-in: During the break-in period, friction between engine components may generate some metal shavings. Driving at excessively high speeds can cause the engine to rev too high, potentially leading to cylinder damage. Break-in period precautions: The key points during a new car's break-in period are maintaining steady speeds, avoiding sudden acceleration or braking, and preventing high RPMs. After completing the break-in period, it's recommended to drive at highway speeds. Additionally, pay attention to any unusual noises. If there are installation or configuration issues with components, remember to address them during the first free maintenance service. After this period expires, repairs for certain damaged components may not be free.

3

4

Share

What Causes a Three-Way Catalytic Converter to Fail?

The causes of three-way catalytic converter failure include: 1. Use of leaded gasoline: Tetraethyl lead in leaded gasoline causes significant environmental and human health pollution and damage. It also deposits on the active surfaces of the oxygen sensor and catalytic converter in the catalytic device, leading to 'lead poisoning' of the oxygen sensor and greatly reducing the purification efficiency of the three-way catalytic purification device until it is damaged. Long-term use of leaded gasoline can even clog the honeycomb catalytic converter in the catalytic device with tetraethyl lead. 2. Use of lubricants or additives containing lead, silicon, or phosphorus: If harmful components mixed in the lubricant come into contact with the catalytic conversion device, it can also cause the three-way catalytic device to fail. 3. Use of sealants containing harmful components like lead and silicon: Engine repairs often require the use of many sealants. However, if sealants containing the aforementioned harmful components are applied to areas such as the intake manifold gasket or oil pan gasket, it can poison or even disable the three-way catalytic device. 4. Overheating of the three-way catalytic converter: The working temperature of the three-way catalytic device usually should not exceed 800°C. If a cylinder in the engine has poor combustion, the exhaust will contain excessive unburned fuel gases, which can cause the three-way catalytic device to fail or be damaged due to a significant increase in working temperature. 5. Severe impact: A strong collision can break the catalytic converter core and render it useless.

2

Share

What Causes the Loud Roaring Noise When the Car Fan Turns On?

When the car fan turns on and produces abnormal noise, it is usually caused by deformed fan blades, a damaged motor, or dirt and blockage in the air conditioning system. The fan automatically activates when the coolant temperature reaches above 95 degrees Celsius. If the fan blades are deformed, it will create a very loud noise during rotation. Similarly, a damaged fan motor can cause irregular fan speed, leading to abnormal noise. Dirt and blockage in the air conditioning system can result in excessive airflow noise. It is recommended to clean the air conditioning system. Typically, the cabin air filter should be replaced every 10,000 to 20,000 kilometers. If the car operates in a dusty environment, the replacement interval should be shortened. The air conditioning system's pipes may also become moldy or clogged with debris over prolonged use, so it is advisable to clean them every 30,000 to 40,000 kilometers. The car air conditioning system mainly consists of a refrigeration system, heating system, air delivery system, control system, and air purification system. The refrigeration system includes components such as the evaporator, air conditioning compressor, condenser, liquid storage tank, expansion valve, and high/low-pressure pipelines. The heating system comprises the heater core, water valve, and blower motor. Its working principle involves detecting signals from various sensors, such as interior temperature, evaporator temperature, and engine coolant temperature, to output control signals. These signals regulate the radiator fan, condenser fan, compressor clutch, blower motor, and air control motor to achieve automatic temperature control inside the vehicle.

3

0

Share

What is the actual fuel consumption of the 2007 LaCrosse 2.4?

2.4L LaCrosse has a fuel consumption of 10.4 liters per 100 kilometers. The LaCrosse is a mid-size sedan under the Buick brand, and only the older models used naturally aspirated engines, while the newer models are equipped with turbocharged engines. The fuel consumption of a car is not only related to the car itself but also to the driver's driving habits and road conditions. Here is some relevant information: 1. LaCrosse: The LaCrosse is a new mid-to-high-end sedan launched by SAIC-GM on February 22, 2006. The name "LaCrosse" represents a high-quality, high-end image, with "La" symbolizing "breakthrough and transcendence." On July 27, 2020, SAIC-GM Buick announced the launch of the 2021 LaCrosse family, offering a total of four models. 2. Design: The Buick LaCrosse adopts Buick's latest family design language, featuring smooth and elegant body lines and a dynamic body proportion. The wing-shaped full-LED automatic sensing headlights use advanced light curtain technology to create a more uniform and brilliant lighting effect. With a body length of 5026mm, width of 1866mm, height of 1462mm, and a wheelbase of 2905mm, it provides a spacious and comfortable driving and riding space for a large premium sedan, offering a relaxed and comfortable seating posture.

13

0

Share

What Does the First Maintenance of a Motor Vehicle Include?

How to Observe Reference Points for Curve Driving in Driving Test Subject 2?

What is the actual fuel consumption of the 2007 Odyssey 2.4?

How Many Kilometers for the Break-in Period of a Family Car?

What Causes a Three-Way Catalytic Converter to Fail?

What Causes the Loud Roaring Noise When the Car Fan Turns On?

What is the actual fuel consumption of the 2007 LaCrosse 2.4?

What glue to use for a detached car roof liner?

Do Cars Have Lightning Protection?

What are the effects of a car being exposed to rain for a day?

Why is Water Flowing from the Exhaust Pipe?