What does the fault FMI represent?

How Long Does It Take to Fully Charge a Car After Starting?

It takes about half an hour of driving to fully charge the car battery. Here is some related knowledge about car charging: Purpose of charging: The battery power is mainly used to start the car, which consumes a significant amount of energy. However, once the car is running, the battery power is no longer depleted. Precautions: While the car is running, the alternator charges the battery, so there is rarely a need for dedicated charging. However, if the battery is severely depleted due to an unexpected situation, it should be charged promptly and not rely solely on the car's charging system. Generally, after the car engine is turned off, all related equipment switches should be turned off promptly; otherwise, it may lead to severe battery depletion.

17

0

Share

What is the maintenance cycle for motor vehicles?

Motor vehicles generally require maintenance every approximately 5,000 kilometers. Here are the key points regarding engine maintenance: Maintenance content: Primarily involves changing the engine oil and filter. Replace the air filter every 20,000 kilometers, and clean the fuel system, replace the fuel filter, and maintain the radiator cooling net every 30,000 kilometers. For regular maintenance, it's best to use fully synthetic engine oil, which is significantly better than semi-synthetic oil. Purpose: Both new and old vehicles' engines should undergo maintenance because the engine is the most crucial component of a car. Engine maintenance plays a vital role in maintaining vehicle condition and ensures safety during driving.

3

0

Share

What engine does the Lamando GTS use?

Lamando GTS uses a 2.0-liter turbocharged engine. The specific details of the Lamando GTS are as follows: Power specifications: The 2.0-liter turbocharged engine in the Lamando GTS delivers 220 horsepower and a maximum torque of 350 Nm. This engine can output maximum power between 4,500 and 6,200 rpm, and reach peak torque between 1,500 and 4,400 rpm. The engine features hybrid injection technology and utilizes an aluminum alloy cylinder head with a cast iron cylinder block. Suspension system: The Lamando GTS employs a MacPherson independent front suspension and a multi-link independent rear suspension. The multi-link independent suspension enhances wheel contact with the road surface, thereby improving traction.

16

0

Share

What is the fuel consumption per 100 kilometers for the Geely Xingrui?

The comprehensive fuel consumption of the Geely Xingrui is 6.7L/100km. Currently, there are 7 models of the Geely Xingrui available for sale: Elite, Luxury, Luxury+, Time-Space Edition Haoyue, Premium, Flagship, and Time-Space Edition Xingchen. All these models have a comprehensive fuel consumption of 6.7L/100km. The above figures are based on the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, around 10L. Specific factors affecting car fuel consumption are as follows: Car weight: The larger and heavier the car, the higher the fuel consumption. Generally, a small family car with a 1.6L engine weighs around 1.2 tons, with a fuel consumption of about 7.5 liters (calculated under full load conditions), while an SUV model weighs around 1.5 tons, with a fuel consumption of 8.5 liters. Different weights result in different fuel consumption levels. Drag coefficient: The higher the drag coefficient, the more fuel the car consumes while driving. If the car has a better aerodynamic design, the drag coefficient is lower, leading to lower fuel consumption. Economical RPM: During driving, the engine has an optimal torque output point for fuel efficiency. Maintaining the car's speed within this torque output point significantly reduces fuel consumption. Generally, for small-displacement cars, this is around 70 km/h, while for large-displacement cars, it is about 100 km/h. Keeping the speed within this economical RPM range ensures minimal fuel consumption. Driving style: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before encountering a red light can increase fuel consumption.

18

1

Share

How Does a Differential Lock Work?

The working principle of a differential lock is that the friction plate type locks the differential by generating a friction torque through the relative sliding between the friction plates. However, the differential lock should only be used in extreme off-road conditions or severe situations. Using it during normal driving can cause serious damage to the car's tires and other components. Here is a detailed introduction to the differential lock: Differential Lock Overview: It is a locking mechanism for the differential, used to lock the inter-wheel differential (between the left and right half-shafts) or the inter-axle differential (between the front and rear drive axles), to address situations where one or more wheels lose traction and cannot free the vehicle. Function of the Differential Lock: The differential lock refers to locking the differential housing and the half-shaft into one unit when one driving wheel slips, causing the differential to lose its differential function and transferring all torque to the other driving wheel. Differential locks come in various forms, commonly including friction plate type and cone type, with their effectiveness determined by the locking coefficient. The locking coefficient refers to the maximum multiple K by which the torque on the two half-shafts may differ. The locking effect increases with the input torque and the torque difference. Modern differential locks also adopt electronic control forms to adapt to varying usage conditions. Advantages and Disadvantages of the Differential Lock: Advantages of the Differential Lock: In off-road conditions, it allows all wheels of the vehicle to receive effective power, helping the vehicle escape difficult situations. Disadvantages of the Differential Lock: It must be engaged while the vehicle is stationary.

11

3

Share

What Are Some Driving Tips for Highways?

Highway driving techniques include the following. Speed Limit: Before entering the highway, set a speed limit for yourself. It is recommended that first-time drivers maintain a speed of 90-100 km/h under normal road conditions. Check Carefully Before Overtaking: Especially when overtaking large trucks, you must first turn on the turn signal, continuously honk the horn, and if necessary, flash the high beams to signal, ensuring the vehicle ahead is aware of your intention to overtake. Maintain a Safe Distance: Keep a following distance of 100 meters. Highway signs indicating safe distances will frequently appear, helping you estimate your following distance. Avoid driving behind large trucks for extended periods, as their size can obstruct your view ahead. Additionally, some trucks have dim tail lights, which can pose hidden dangers.

13

1

Share

What does the fault FMI represent?

How Long Does It Take to Fully Charge a Car After Starting?

What is the maintenance cycle for motor vehicles?

What engine does the Lamando GTS use?

What is the fuel consumption per 100 kilometers for the Geely Xingrui?

How Does a Differential Lock Work?

What Are Some Driving Tips for Highways?

Do I need to turn on the AC when using the car heater?

Is the Boyue 1.8T engine durable?

How many kilometers does it generally take to fully charge a car battery?

Is the brake on the left or right in an automatic car?