What does the faucet symbol on the car mean?

3 Answers
KevinDella
07/24/25 1:32pm
A yellow faucet symbol appearing on the car dashboard indicates insufficient oil pressure, which cannot meet the engine's lubrication requirements. Therefore, it is essential to inspect and repair the issue when it occurs. Generally, in such cases, the first steps are to check whether the engine oil is insufficient, whether oil is being supplied, whether the oil pressure sensor wiring has come loose or is grounded, or whether it is damaged. It is recommended to seek repairs as soon as possible. It could also be an emission system fault indicator, with the main issue possibly being poor fuel quality. Below is additional information: 1. Engine warning light illuminated: The engine warning light may indicate a dirty throttle body that needs cleaning or issues caused by poor fuel quality, among other problems. It is advisable to visit a 4S shop promptly to scan for fault codes and resolve the issue. 2. Recommendations for protecting the lubrication system: Use lubricants approved by the manufacturer to avoid poor engine lubrication, which could affect the normal operation of the engine crankshaft. Follow the maintenance schedule outlined in the user manual for regular servicing. If the warning light remains illuminated for an extended period, it is recommended to stop the vehicle, turn off the engine, and consult or seek assistance from a professional technician.
Was this review help?
10
0
Share
EmersynLynn
08/10/25 6:40am
The faucet-shaped symbol is actually the engine malfunction indicator light, and I've seen it light up several times. Although the icon resembles a faucet, when it illuminates, it indicates there's something wrong with the engine. It could be a sensor acting up, like the oxygen sensor being clogged with carbon deposits; or an emission issue, such as the catalytic converter not performing well; or maybe the fuel quality is too poor, leading to incomplete combustion. Last time I encountered this, my car was shaking noticeably, so I drove straight to the repair shop to check the trouble codes. Remember, if it's a yellow light, you can still drive slowly to get it checked, but if it's flashing red, pull over immediately to avoid engine damage.
Was this review help?
15
3
Share
Expand All
RyleeFitz
09/25/25 6:05am
I often encounter this situation when repairing cars. The appearance of a wrench icon on the dashboard indicates a fault in the engine control system. Possible causes include aging spark plugs, faulty mass air flow sensors, exhaust pipe leaks, or engine misfires. Once I worked on a car where this warning light stayed on constantly, and upon disassembly, we found the exhaust gas recirculation valve was stuck. My advice: when this light comes on, avoid aggressive throttle inputs and pop the hood to listen for unusual noises. If you notice black smoke from the exhaust or a sudden spike in fuel consumption, immediate inspection is absolutely necessary. Prevention is actually quite simple - regular throttle body cleaning and using high-quality engine oil will do the trick.
Was this review help?
13
3
Share
Expand All
More Forum Discussions

How to Turn On/Off the Ambient Lighting in the Tiguan L?

The manufacturer of the Tiguan L did not design a switch for the ambient lighting inside the car, so it cannot be manually turned on or off. Generally, when it gets dark, placing the light adjustment knob in the 'auto' position will automatically illuminate the lights. Below are specific details about the ambient lighting in the Tiguan L: 1. Locations: The ambient lighting in the Tiguan L is located at the four-door trim illumination, four-door inner handle illumination, four-door armrest illumination, and footwell lighting (front and rear), totaling 16 locations. 2. Light Source: It uses white LED light sources, and the brightness can be adjusted via the central MIB system (1-100%). This creates a soft effect close to natural light, bringing a warm and comfortable feeling when entering the car at night, enhancing the driving and riding experience.
8
0
Share

BMW X5: Should I Buy the 2.0T or 3.0T?

Here are the differences between the BMW X5 2.0T and 3.0T: 1. Power: The 2.0T model of the BMW X5 is equipped with a turbocharged engine, with a maximum power output of 265 horsepower and a peak torque of 400 Nm. The 3.0T model, on the other hand, features a turbocharged engine with a maximum power output of 340 horsepower and a peak torque of 450 Nm. 2. Configuration: The 2.0T model comes with a cruise control system, while the 3.0T model is equipped with an ACC adaptive cruise control system. 3. Price: The 3.0T model of the BMW X5 has higher configurations compared to the 2.0T model, making it more expensive.
2
1
Share

How to Reset the Driver's Window on a Mazda 6?

To reset the driver's window on a Mazda 6, first turn on the vehicle's ignition switch. Press the driver's window lift switch to lower the window completely, then raise it to the top. Hold the switch for three seconds before releasing it. The reset method for other windows is the same. Below is some relevant information about car windows: 1. Power windows, which use a motor to drive the glass up and down, replace traditional crank-operated windows. Each door is equipped with a button for the window lift switch, making the window operation more convenient and comfortable. 2. Automatic lift function, which is the most basic feature of power windows. Simply press the switch, and the window will continue to rise or fall until it hits the limit switch. 3. External window control function, where inserting and turning the door key from outside the vehicle can lower the window. 4. Lastly, the power reserve function, which is only available on some vehicles, provides about one minute of continued power to the window circuit after the vehicle is turned off.
13
4
Share

What is the most effective way to remove formaldehyde from a new car?

New cars can quickly remove formaldehyde through the following three methods. Here are the methods for removing formaldehyde from a new car: 1. Pay attention to ventilation: The plastic packaging inside the car should be removed as soon as possible so that harmful gases can be released quickly. When driving, open the windows more often to allow air circulation, which will also help remove odors from the car. 2. Adsorption method: Use activated charcoal or Ye Guangni for adsorption. It is important to note that activated charcoal tends to become saturated, so it needs to be replaced after a period of use. Otherwise, the absorbed substances may be released again. In contrast, Ye Guangni not only adsorbs but also decomposes the absorbed harmful substances. It does not require sun exposure and does not become saturated, making it a better choice. 3. Air fresheners: Be careful not to buy only masking sprays. Instead, opt for air purifiers like Guang Lusu, which not only mask odors but also decompose formaldehyde. Only those that can decompose formaldehyde are effective.
10
0
Share

Which car brand is maxus?

maxus refers to SAIC Maxus, a wholly-owned subsidiary of Shanghai Automotive Industry Corporation (SAIC). The brand offers MPV and SUV models, with SUV models including the D60 and D90. Below are relevant details: 1. The D90 is a mid-to-large SUV equipped with a 2.0-liter turbocharged engine. This engine delivers 218 horsepower and a maximum torque of 350 Nm, featuring direct fuel injection technology and an aluminum alloy cylinder head and block. It is paired with a 6AT transmission. The D90 utilizes a double-wishbone independent front suspension and a five-link solid axle non-independent rear suspension. 2. The D60 is powered by two engine options: a 1.3-liter turbocharged engine and a 1.5-liter turbocharged engine. The 1.3-liter turbocharged engine produces 163 horsepower and a maximum torque of 230 Nm, featuring multi-point fuel injection technology and an aluminum alloy cylinder head and block. The 1.5-liter turbocharged engine generates 169 horsepower and a maximum torque of 250 Nm, featuring direct fuel injection technology and an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission.
9
4
Share

How to Check the Oil Level Normally on Wuling Rongguang?

Wuling Rongguang's oil dipstick has clear upper and lower limit marks. When adding engine oil, ensure the oil level is between these two marks for normal operation. In automobiles, the dipstick is a commonly used tool to check the remaining quantity of lubricating oil in the oil hole. Due to the curved path of the dipstick insertion hole, the dipstick must be able to deform when inserted and rebound when pulled out. The method for checking the oil level on Wuling Rongguang's dipstick in a stationary state is as follows: 1. After leaving the car overnight or stopping for half an hour, accurately observe the oil level on the dipstick, checking both the front and back sides. 2. Under normal circumstances, check the dipstick once or twice a day. 3. In abnormal situations, such as reduced engine sealing performance, increased oil consumption, or internal/external leaks that have not been addressed. 4. After any malfunction occurs, especially internal damage, promptly check the dipstick. 5. When checking the dipstick, pay attention not only to the quantity but also to any changes in the oil's quality.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.