What does the exhaust pipe resonance of the 5008 mean?

2 Answers
LaJack
07/24/25 9:21am
The exhaust pipe resonance of the 5008 refers to the vibration of the car's floor, accompanied by a humming sound, which can significantly affect the vehicle's comfort. The vibration of the exhaust pipe is a form of resonance caused by the engine's operation. Typically, a corrugated pipe is installed after the catalytic converter and before the middle section of the exhaust to reduce vibrations transmitted to the middle and rear sections. This corrugated pipe functions like a spring damping system. A well-designed corrugated pipe can attenuate most of the vibrations propagating along the exhaust pipe, but some residual vibrations may still continue. Methods to resolve the exhaust pipe resonance in the 5008: Add clamps: Clamps are quite effective, but the resonance may still occur as the vehicle's condition changes. Replace the exhaust pipe hanger rubber: It is recommended to use high-strength exhaust pipe hanger rubber. Install a flexible mesh/soft connection: Adding a flexible mesh or soft connection can also help reduce exhaust resonance.
Was this review help?
17
5
Share
BradleyLee
08/11/25 4:45am
I've been driving for several years and personally experienced the exhaust pipe resonance issue with my 5008. It's when the exhaust pipe produces a buzzing noise and vibrates the car body at specific RPMs, feeling like having a subwoofer installed in the car - really uncomfortable. This generally refers to the exhaust pipe matching frequencies with other components, amplifying vibrations, most commonly occurring during acceleration between 1500 to 2500 RPM. There are many possible causes, like aged exhaust hangers or loose bolts - improper installation often leads to this. When I first noticed the abnormal noise on the highway, I checked forums after getting home and found this is a common issue with 5008 models due to insufficient factory-designed damping components. Later I had it inspected and replaced the hangers, which solved the problem. Resonance isn't just noisy - it might even shake small parts loose, affecting driving safety. Now if I hear similar sounds, I'd immediately pull over to check if the exhaust pipe is shaking before heading to a professional repair shop. Early intervention prevents bigger expenses later.
Was this review help?
1
2
Share
Expand All
More Forum Discussions

How much fuel can actually be added to a 55-liter fuel tank?

How much fuel can actually be added to a 55-liter fuel tank? The actual capacity can reach up to 70 liters. Relevant information is as follows: 1. Introduction: How to determine the actual fuel tank capacity The marked capacity of a car's fuel tank is not the actual maximum capacity but the maximum reasonable capacity. A standard fuel tank can hold 10% to 15% more fuel than the marked capacity. 2. Fuel tank capacity measurement unit: The international standard for measuring fuel tank capacity is liters (L). Different countries have their own standards for fuel tank capacity. In China, the regulation stipulates that the fuel tank capacity should be 95% of the rated value, but in practice, the actual capacity is usually greater than the nominal capacity, so there is no need to worry about the fuel tank being smaller than expected. Nowadays, many car fuel tank capacities are manufactured according to the brand and model, so some countries do not have strict regulations on fuel tank capacity.
12
4
Share

What Causes the Noise When Braking a Car?

Reasons for noise when braking a car: 1. Severe wear of brake pads, usually caused by brake pads reaching the warning line or being completely worn out, with the noise mostly being a sharp metal friction sound; 2. Noise caused by the material of the brake pads, generally harder brake pad materials are more likely to produce this type of noise; 3. Improper installation of the brake system causing noise. Car brake pads, also known as car brake linings, refer to the friction materials fixed on the brake drum or brake disc that rotates with the wheel. The friction lining and friction block within them bear external pressure to generate friction, thereby achieving the purpose of vehicle deceleration. Car brake pads are generally composed of steel plates, bonded heat insulation layers, and friction blocks. The steel plates are coated to prevent rust, and the coating process uses an SMT4 furnace temperature tracker to monitor the temperature distribution during the coating process to ensure quality.
16
3
Share

What are the reasons for water ingress on the floor of the 2014 Bora's cabin?

Possible causes include rust perforation in the car's chassis, clogged drainage channels, damaged sealing strips, or water accumulation in the sunroof. Below are the detailed explanations: 1. Rust perforation in the chassis: Water can enter through the wheels, so it's necessary to thoroughly inspect and seal or install protective liners. 2. Clogged drainage channels: The rainwater drainage holes under the front window's drainage channel may be blocked by debris. 3. Damaged sealing strips: During rainy weather, water can enter the car floor through the doors. Check if the door sealing strips are damaged or ineffective and replace them promptly.
9
0
Share

What are the features of the Nissan Sylphy?

In the Nissan Sylphy's interior, above the central air vents is the multimedia screen, which is controlled via touch. Below the air vents is the vehicle's heating and air conditioning control system, operated using buttons and knobs. At the bottom left of the center console are function buttons for the ECO mode, instrument panel brightness adjustment, tire pressure reset, headlight height adjustment, AUTO switch, and trunk switch. Below is an introduction to the Dongfeng Nissan Sylphy: 1. Powertrain: The Dongfeng Nissan Sylphy is a compact sedan, currently available in the 2021 model year. The vehicle is equipped with a 1.6L naturally aspirated engine, paired with a CVT or manual transmission. 2. Body dimensions: The vehicle has a length of 4641 mm, a width of 1815 mm, and a height of 1450 mm, with a top speed of 186 km/h.
1
4
Share

Should You Avoid Braking While Turning?

No, you should not. This causes the left and right wheels to rotate at different speeds during a turn, leading to uneven wear on the brake pads. As a result, the vehicle may experience unbalanced braking force during normal braking, increasing the risk of veering off course. Additionally, turns often have limited visibility, meaning the driver may not fully understand the road conditions ahead before entering the turn. Braking at high speed while turning significantly raises the danger level, so it's best to avoid braking after entering the turn. Correct Approach for Turning: Proper braking should be completed before entering the turn. Maintain a steady speed while navigating the curve, and avoid shifting into neutral. Since you've already reduced speed before the turn, it's advisable to downshift appropriately and use a lower gear to complete the turn. Accelerate only after exiting the turn. Hazards of Braking Before a Turn: If you only slightly reduce speed before the turn and perform most of the braking during the turn, it will cause the left and right wheels to rotate at different speeds, leading to uneven brake pad wear. This imbalance in braking force can cause the vehicle to veer off course during normal braking.
20
3
Share

How to Choose a Motorcycle Helmet in Summer?

Helmets are mainly divided into three types: full-face helmets, half helmets, and three-quarter helmets. Here is relevant information: 1. Full-face helmets: Full-face helmets provide maximum coverage for the head, offering the most comprehensive protection in the event of an accident, thus having the highest safety rating. The downside is that they can be very hot to wear in summer, especially when waiting at traffic lights. 2. Half helmets: Half helmets, also known as "brain buckets," only cover the upper part of the head. They are convenient to wear and not too hot in summer, and they don’t take up much space in the motorcycle luggage compartment. The downside is that they cover too little of the head, failing to protect the cheeks and chin, and can easily be thrown off during a crash, leaving the head exposed, thus offering poor protection. Additional goggles or visors are required.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.