What does the exclamation mark on the Zotye T700 screen mean?

1 Answers
DiIsabela
07/25/25 3:25pm
Zotye T700 screen displaying an exclamation mark indicates a fault warning. Here are detailed explanations for different exclamation mark symbols on the screen: 1. A triangle with an exclamation mark inside: This is a general fault indicator light. It illuminates when any of the following conditions occur: dry dual-clutch transmission clutch overheating, fuel cutoff system intervention or malfunction, parking sensor failure, external lighting fault, engine oil pressure sensor failure, or traction control system warning/failure. 2. A circle with parentheses and an exclamation mark inside: This is the brake system warning light. It lights up for a few seconds when turning on the ignition and should turn off after starting the engine. It remains illuminated when brake fluid level is too low or when there's a brake system malfunction. 3. A horizontal line with parentheses below and an exclamation mark inside: This is the tire pressure monitoring warning light, which illuminates when the pressure in any tire is too low.
Was this review help?
13
0
Share
More Forum Discussions

Should the Dodge Journey use 92 or 95 octane fuel?

The minimum fuel octane rating required for the Dodge Journey varies depending on the model. The 2.4L model has a minimum requirement of 92 octane, while the 3.6L model requires at least 95 octane. The diesel version uses No. 0 diesel fuel. Here is some related information about 92 and 95 octane gasoline: 1. The most commonly used gasoline grades for gasoline engines are 92 and 95 octane. In fact, there is no difference in fuel quality between these two grades. 2. 92 octane gasoline consists of 92% isooctane and 8% n-heptane, while 95 octane gasoline is composed of 95% isooctane and 5% n-heptane. The different proportions of isooctane and n-heptane in these two fuel grades result in varying anti-knock properties, with higher isooctane content providing stronger anti-knock performance.
16
1
Share

What are the reasons for the failure of BMW's parking distance warning device?

Here are the specific reasons for the failure of BMW's parking distance warning device: 1. Reason 1: A circuit failure or damage to a radar power supply may be the cause. The failure of the parking distance warning device essentially means the front or rear parking radar is not functioning, preventing the detection of distances to obstacles. If the vehicle is equipped with front and rear parking radars, the radar sensors can be seen on both the front and rear bumpers. 2. Reason 2: Check if there is an issue with the module signal. It might be a module problem, and it is recommended to perform a computer diagnosis for further confirmation. The PDC module is integrated into the JBE front electronic module. Here are the specific reasons for the failure of BMW's parking distance warning device: 1. Reason 1: A circuit failure or damage to a radar power supply may be the cause. 2. Reason 2: Check if there is an issue with the module signal.
17
0
Share

What causes the loud noise from the BMW 5 Series electric fan?

The reasons for the loud noise from the BMW 5 Series electric fan are as follows: 1. Carbon deposits: As old engine oil becomes thinner with use, carbon deposits accumulate more and more. Thinner engine oil can easily lead to oil leakage, resulting in increasing carbon deposits and significant power loss. When new oil is added, the engine may not adapt to the viscosity of the new oil, potentially causing higher RPMs, which in turn leads to louder engine noise. 2. Coolant: When the coolant temperature is too low, problems are likely to occur, and the engine noise may increase. In such cases, it is advisable to check and replace the coolant to avoid other issues. 3. Shock absorbers: Generally, when driving over speed bumps, you can feel whether the vehicle's shock absorbers are functioning properly. If there is an issue with the shock absorbers, it can result in louder engine noise.
17
2
Share

What is the normal range for vehicle deviation?

When a vehicle maintains steady driving over 1000 meters, a deviation within 5 meters is considered normal. Causes of vehicle deviation include: 1. Incorrect wheel alignment: In most cases, deviation can be resolved by performing a wheel alignment. However, if the issue persists after alignment, other factors must be considered. 2. Unequal tire pressure on both sides: Different tire pressures cause tires to vary in size, inevitably leading to deviation. 3. Front shock absorber failure: A failed front shock absorber results in uneven suspension heights during driving, causing uneven force distribution and deviation. Specialized shock absorber testers can be used to assess their condition; if disassembly is not possible, a stretching method can be employed to evaluate. 4. Chassis wear: Excessive wear or abnormal gaps in the vehicle's chassis components can easily cause deviation. Key areas prone to excessive gaps include steering linkage ball joints, support arm bushings, and stabilizer bar bushings. These parts should be thoroughly inspected for wear.
12
0
Share

How to Re-pair the Tire Pressure Monitoring on Baojun 510?

Tire pressure monitoring re-pairing method: Press and hold the middle button on the display to enter the learning mode. Press the left button, and the left front wheel icon will flash. Install a new sensor on the left front wheel. Press the right button to switch to the right front wheel, press the right button to switch to the left rear wheel, and press the right button to switch to the right rear wheel. After completing the learning process for all four sensors, press the middle button twice to return to the main display page. Below is additional information: Principle of the tire pressure monitor: The tire pressure monitoring system mainly includes two types: "direct tire pressure monitoring system" and "indirect tire pressure monitoring system." The direct tire pressure monitoring device uses pressure sensors installed in each tire to directly measure the tire pressure. It utilizes a wireless transmitter to send pressure information from inside the tire to the central receiver module system, which then displays the tire pressure data for each tire. When the tire pressure is too low or there is a leak, the system will automatically issue an alarm.
10
0
Share

What is the engine model of the Kia K3?

The Kia K3 is equipped with two engine models: the 1.6L Gamma engine and the 1.8L Nu engine. Below are detailed introductions of these two engines: 1. The 1.6L engine differs from the one installed in the current Forte, with the model upgraded from G4FC to G4FG, and the CVVT intake variable valve technology upgraded to DVVT intake variable valve technology. It has a maximum power of 93.8kw/6300rpm and a maximum torque of 155.5Nm/4850rpm. 2. The 1.8L engine adopts the latest Nu series engine, with a maximum power of 107kw/6500rpm and a maximum torque of 175Nm/4700rpm. 3. Compared to the Gamma engine, the most significant feature of the Nu series engine is its lightweight design. This engine is also used in the K5.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.