···
Log in / Register

What does the exclamation mark on the Volkswagen CC dashboard mean?

3 Answers
SamanthaLynn
07/29/25 1:16pm
There are five possible scenarios when an exclamation mark appears on the car dashboard: general malfunction, automatic transmission failure, brake system failure, abnormal tire pressure, and lighting system failure. Below is a detailed analysis of these five situations: General malfunction: A triangle with an exclamation mark inside indicates a malfunction in the vehicle's general performance, components, or functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor malfunction. It is necessary to visit a 4S shop for inspection to identify the source of the problem. Automatic transmission failure: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a transmission malfunction or that the transmission lubricant is below the normal range. The transmission fluid should be replaced promptly. Brake system failure: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, typically indicating a brake system malfunction or low brake fluid level. Immediate inspection and repair of the brake system are required to avoid accidents. Abnormal tire pressure: A horizontal line with parentheses below and an exclamation mark in the middle is the tire pressure monitoring warning light. This light illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting system failure: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in one of the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue.
Was this review help?
15
3
Share
BennettLynn
08/14/25 3:22am
I've got plenty of experience with the exclamation mark on the Volkswagen CC dashboard—it happened during my last road trip. It's like the car is yelling 'Heads up!' at you! The most common is the yellow triangle with an exclamation mark, usually indicating an issue with the vehicle stability system. A red circle with an exclamation mark is more serious, signaling a problem with the braking system—maybe the handbrake isn't released or the brake fluid is low. If there's a small parenthesis next to it, that means there's a tire pressure issue. Don't panic when you see it; first, check what the exclamation mark looks like—whether it's steady or flashing. If it's a red circle and the brakes feel soft, pull over immediately and check the brake fluid reservoir—safety first! In my case, it was a coolant leak that triggered the warning, and I had to visit the repair shop to fix it. I recommend keeping the vehicle manual handy—when you see a symbol, flipping through it will give you peace of mind.
Was this review help?
17
4
Share
Expand All
SanNatalie
10/10/25 2:05am
A friend driving a CC saw an exclamation mark light up on the dashboard and asked me about it. It feels like the car is posting a reminder on its social media. The most common one is the yellow triangle symbol, which usually indicates an issue with the electronic system, such as unstable ESP. If there's a red exclamation mark inside a circle, immediately check the handbrake position and brake fluid level. Once, my friend couldn't figure out the cause no matter how hard he tried, only to find out it was a false alarm from the sensor because the trunk wasn't closed properly—pretty funny, right? Actually, when encountering such situations, prioritize based on severity: yellow lights can wait a bit, but red lights must be addressed immediately. I recommend using the steering wheel buttons to navigate the dashboard menu after parking—some models display specific fault codes on the small screen. Every time I get my car serviced, I ask the mechanic to check the sensor wiring harness. Now, after five years, my car rarely gives false alarms. In the end, regular inspections are the most reliable.
Was this review help?
3
1
Share
Expand All
More Forum Discussions

How to Deal with Intake Camshaft Position Fluctuation in Roewe 350?

Install a dial indicator in the thrust direction at the front end of the camshaft to measure whether the axial end clearance indicated by the dial when the camshaft moves forward and backward (axially) is normal. The limit value for camshaft end clearance is 0.1~0.2mm. If it exceeds this value, you can reduce the thickness of the spacer ring or replace the thrust collar. For fluctuations caused by a faulty camshaft position sensor, simply replace it with a new one. Check if the timing chain is loose, as a loose chain can cause gear misalignment, leading to camshaft fluctuation.
12
4
Share

How to Turn on the High Beam on a CRV?

Carry the key close to the car (within two meters) to unlock the door. After entering the driver's seat, gently press the one-touch start button to power on the vehicle and initiate self-check. On the lower left side of the steering wheel, there is a turn signal lever. The outer part is the headlight and position light switch. Turn the knob to the bottom position to turn on the headlights. The headlights turned on at this time are low beams. In this state, push the lever downward to activate the high beams. After turning on the low beams, pull the light control lever backward to momentarily activate the high beams, also known as flashing the high beams or alternating between high and low beams.
18
0
Share

How to Remove the Door Panel of an Old Jetta?

First, prepare the tools: one flat-head screwdriver, one Phillips-head screwdriver, and one T30 wrench. Unscrew the door handle counterclockwise, remove the inner door handle, pry open the plastic cover from below using the flat-head screwdriver, then loosen the two screws inside with the T30 wrench. Remove the three Phillips-head screws on the door edge; forcefully push open the locking clip of the handle frame (push outward toward the door), then push along the arrow direction to complete the removal. Forcefully remove the rearview mirror adjustment knob, unplug the control button wiring harness connector inside the Jetta door panel. Lift the door panel off the bracket. Forcefully pull open the clips to remove the door panel.
16
0
Share

What is the solution for oil burning in a 2015 Peugeot 408?

For a 2015 Peugeot 408 experiencing oil burning, you can increase the sealing between the engine pistons and cylinder walls by switching to a higher viscosity oil or regularly inspecting and replacing relevant oil system components. Symptoms of oil burning: Blue smoke during cold starts indicates minor oil burning. If you observe large amounts of blue smoke from the exhaust pipe, this signals significant engine oil burning. A very black exhaust pipe interior wall is another indicator. Preventive measures for oil burning: Use high-quality engine oil. Oil tends to corrode and degrade under prolonged high temperatures, thinning the oil film and making it easier to enter the combustion chamber. Using premium quality oil can significantly delay this phenomenon.
15
4
Share

How to route wires from outside to inside the car for Magotan B7?

Open the hood of the Magotan B7, locate the firewall on the partition between the hood and the driver's seat, and make a hole in the rubber plug, which serves as the passage for the wire harness. Open the glove box, find the fuse box of the Magotan B7 inside, where there will be spare fuse positions. Connect the external wire harness's fuse circuit to the spare fuse. After connecting the wires, organize the wire harness properly, cover it with protective caps, ensure waterproofing, and secure the wire harness in the appropriate position on the car using fastening clips. After debugging and confirming normal operation, seal the rubber plug wire harness hole with silicone sealant, remove any excess sealant, and finish with aesthetic treatment.
17
4
Share

What to Do If the Geely Vision Car Key Is Lost?

When taking delivery of the car, the 4S dealership will provide the owner with two keys, one of which is a spare key. If a key is lost, the first step is to locate and use the spare key. Call a professional locksmith company and request them to send a technician to assist with unlocking the car. You will need to provide identification documents such as an ID card and driver's license. Most 4S dealerships now offer emergency rescue services. Contacting the dealership will help get the car door opened and arrange for a new key to be made. The Geely Vision car key consists of a remote control and a mechanical key. Identical models are available for purchase online. After purchasing, the owner can follow the instructions to self-match the key.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.