What does the exclamation mark on the Lavida dashboard mean?

1 Answers
AshleyRose
07/29/25 6:46pm
When a yellow exclamation mark appears on the car dashboard, there are four possible scenarios: general faults, automatic transmission faults, abnormal tire pressure, and lighting faults. Below is a detailed analysis of these four situations: General Faults: A triangle with an exclamation mark inside indicates that the car's general performance, components, or functions have malfunctioned. Common issues include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, or engine oil pressure sensor failure. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a transmission malfunction or transmission lubricant level below the normal range. Transmission fluid should be replaced promptly. Abnormal Tire Pressure: A horizontal line under a bracket with an exclamation mark in the middle represents the tire pressure monitoring warning light. This light turns on when the car's tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in one of the car's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue. There is also a red exclamation mark inside a circle with parentheses, which represents a brake system warning. This could indicate a brake system malfunction or low brake fluid level. Immediate inspection of the brake system is required to avoid accidents.
Was this review help?
4
1
Share
More Forum Discussions

Will You Fail the Driving Test for Crossing Solid Lines in Subject 3?

Subject 3, which includes the road driving skills test and the safety and civilized driving knowledge test, is part of the motor vehicle driver's license assessment. It is the abbreviated term for the road driving skills and safety and civilized driving knowledge test in the motor vehicle driver's examination. The content of the road driving skills test varies depending on the type of vehicle you are licensed to drive. Below is an introduction to the content of the Subject 3 test: 1. The road driving skills test for Subject 3 generally includes: preparation before driving, simulated lighting test, starting, driving in a straight line, shifting gears, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crosswalks, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and driving at night. 2. The safety and civilized driving knowledge test generally includes: requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations such as tire blowouts, and knowledge of post-accident handling procedures.
10
0
Share

What Does a Faulty Catalytic Converter Mean?

Catalytic converter, also known as catalytic purifier, is a device installed in the vehicle's exhaust system. Its function is to reduce most of the harmful pollutants emitted by the engine. A faulty catalytic converter indicates an issue with the engine's exhaust function. Additional information: 1. Composition: A three-way catalytic converter consists of a metal casing, a mesh base frame, and a catalytic layer (containing precious metals such as platinum and rhodium). It can remove up to 90% of three major pollutants: HC (hydrocarbons), CO (carbon monoxide), and NOx (nitrogen oxides). The term 'three-way' refers to the chemical reactions that occur when these three compounds are removed. 2. Principle: When exhaust gases pass through the converter, the platinum catalyst promotes the oxidation of HC and CO into water vapor and carbon dioxide, while the rhodium catalyst facilitates the reduction of NOx into nitrogen and oxygen. These oxidation and reduction reactions only begin when the temperature reaches 250°C.
5
1
Share

Is the area under the driver's seat completely exposed?

The area under the driver's seat is not always completely exposed. However, this is quite normal, as even many mid-range luxury brand vehicles don't have coverage in this area. In fact, there's no need to pay too much attention to this spot, as it mainly houses the vehicle's steering column and other electrical equipment. Whether there's a cover panel or not doesn't affect the vehicle's usage. Additionally, it's not recommended to install an aftermarket cover panel on vehicles without one, as some models are equipped with knee airbags, and adding a cover might prevent them from deploying properly. Here's some additional information: 1. Many vehicles have exposed areas under the driver's seat where you can directly see the steering column and wiring harness. Some budget vehicles omit this trim panel to save costs. This design is more common in A-segment and B-segment vehicles, while flagship models from luxury brands typically don't have this issue. 2. This area isn't normally visible when sitting in the car or standing outside - you only see it when changing floor mats. This is a result of cost-cutting measures, and some base-model B-segment cars also have this exposed area, which doesn't affect normal driving.
13
5
Share

How Long Is One Cycle for Traffic Management 12123's Study to Reduce Points?

A scoring cycle is 1 year. Below are the rules for "Study to Reduce Points": 1. Point Reduction Rules: Motor vehicle drivers who participate in online learning can accumulate 30 minutes of study within 3 days, with each session lasting no less than 5 minutes. Upon passing the exam, they can reduce 1 point. The maximum point reduction within one scoring cycle is 6 points. The entire process consists of four steps: online study and exam application, online learning, online exam, and driver's license point reduction. 2. Exam Content: The study and exam content includes judgment of traffic violations and case analysis, safe driving knowledge, highway driving knowledge, emergency avoidance knowledge, etc. Motor vehicle drivers must apply to take the exam within 7 working days from the completion of the study. The exam lasts 20 minutes, with a maximum of 60 seconds per question. The system randomly selects 20 questions from the question bank, including true/false, single-choice, and multiple-choice questions. To pass, 18 or more correct answers are required. If 3 or more questions are answered incorrectly or left unanswered, the system will automatically deem the exam failed and terminate it. If the exam is not passed, a retake can be applied for within 24 hours, with a limit of 2 retakes.
5
4
Share

What Causes the Vehicle Anti-lock Braking System Light to Illuminate?

Here are the specific reasons why a vehicle's ABS (Anti-lock Braking System) warning light may illuminate: 1. ABS pump malfunction or power/ground circuit failure in the ABS pump. 2. Loose sensor connectors or failure of a specific sensor. 3. Related fuse blown or burned out. 4. Blocked system signal transmission. 5. False alarm due to system misreporting. Below is extended information about the ABS system: 1. Function of ABS system: ABS is the vehicle's anti-lock braking system, which belongs to the active safety systems of automobiles. When the ABS light comes on, it indicates that the vehicle's computer has detected a fault in the ABS system. 2. Reasons for ABS light illumination: Under normal driving conditions, the ABS remains dormant. It only activates during emergency braking situations, such as hard braking at high speeds, when the vehicle's computer determines that ABS intervention is necessary. When the ABS light illuminates, it is often due to the wheel speed sensors not functioning properly. The ABS computer cannot detect the driving conditions of each tire or compare the slippage amounts of individual wheels, resulting in the ABS system's inability to operate correctly.
8
5
Share

What is the tire model of the GAC Trumpchi GS4?

There are two types of tires for the Trumpchi GS4, which are 225/60R17 and 225/55R18. The first number 225 represents the tire width of 225MM, 60 and 55 respectively indicate the aspect ratio of the tire section is 60% and 55%, that is, the section height is 60% and 55% of the width, and 17 and 18 respectively represent the rim diameter of 17 and 18 inches. The middle letters or symbols have special meanings: "X" represents high-pressure tires; "R" and "Z" represent radial tires; "-" represents low-pressure tires. The tire brand for the Trumpchi GS4 is Michelin PRIMACY 3ST. If you want to replace the tires yourself, you can follow the steps below: Take out the spare tire and jack, place the jack under the frame of the tire to be replaced, ensuring the jack touches the metal part of the frame; Raise the jack until it supports the car, the jack should be under the vehicle, check and ensure the jack is at a right angle to the ground; Remove the hub cover, loosen the nuts counterclockwise, do not completely loosen the nuts, just enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts are turned instead of the tire; Turn the nuts counterclockwise until they are loose, repeat this step for all lug nuts, and completely remove the nuts; Place the new tire on the hub, carefully align the tire rim and wheel bolts, install the lug nuts, tighten the nuts by hand until all nuts are concealed, at this point the tire replacement is completed. In addition to the model, the tire also has the following common data: Tire cord material: represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: indicates the maximum speed at which the tire can carry the specified load under specified conditions. Letters A to Z represent the certified speed ratings of the tire from 4.8km/h to 300km/h. Common speed ratings are: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: indicates the rim specification that matches the tire. For practical use, such as: standard rim 5.00F.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.