What does the exclamation mark on the dashboard of Volkswagen Sagitar mean?

1 Answers
KayleeFitz
07/28/25 10:02pm
The reasons for the exclamation mark appearing on the dashboard of Volkswagen Sagitar include: parking sensor failure, excessive brake pad wear, engine oil pressure sensor failure, insufficient brake fluid, fuel cut-off system intervention or failure, etc. Common fault indicator lights up: Possible causes include dry dual-clutch transmission clutch overheating; fuel cut-off system intervention or failure; sensor failure; external light failure; engine oil pressure sensor failure; traction control system warning or failure, etc. Brake system warning light comes on: In some vehicles, it lights up for a few seconds after turning on the ignition switch and turns off after starting the engine; it lights up when the handbrake is engaged and turns off when released; it lights up during driving if the brake fluid level is too low.
Was this review help?
11
3
Share
More Forum Discussions

What to Do When the BMW X5 Trunk Fails to Close Automatically?

The solutions for the BMW X5 trunk failing to close automatically are: 1. Check if there are any obstructions in the trunk; 2. Inspect whether the sensors are malfunctioning; 3. Verify if the car key has any coding errors. The BMW X5 is a mid-to-large-sized SUV with body dimensions of 4930 mm in length, 2004 mm in width, and 1776 mm in height, with a wheelbase of 2975 mm. It is equipped with a 2.0T turbocharged engine producing a maximum horsepower of 265 and a maximum power of 195 kW. The front suspension features a double-wishbone independent suspension, while the rear suspension uses a multi-link independent suspension, with electric power steering.
13
0
Share

What Causes a Car Transmission to Overheat?

Car transmission overheating causes vary by transmission type: 1. Dual-clutch transmissions: caused by continuous engagement and disengagement of clutch plates; 2. CVT transmissions: caused by slipping of steel belts or chains; 3. AT transmissions: caused by poor transmission fluid cooling or excessive launch starts. Methods for maintaining car transmissions include: 1. Regularly changing transmission fluid; 2. Frequently checking fluid levels; 3. Avoiding coasting in neutral; 4. Avoiding skip-shifting; 5. Not forcing the transmission into neutral; 6. Minimizing idle warm-up time; 7. Preventing gear grinding during shifts; 8. Cleaning the transmission.
8
2
Share

What do N gear and D gear mean respectively?

N gear and D gear refer to neutral gear and drive gear respectively, and the differences between them are: 1. Different usage: N gear is used for temporary parking; D gear is used when the car is moving forward and can automatically select the gear. 2. Different applications: N gear is suitable for both manual transmissions and automatic transmissions; D gear is suitable for automatic transmissions. An automatic transmission does not require the driver to manually shift gears; the vehicle will automatically select the appropriate gear based on the driving speed and traffic conditions. Other gears include: 1. P gear is the parking gear; 2. R gear is the reverse gear; 3. L gear is the low-speed gear; 4. S gear is the sport mode.
7
5
Share

Where is the oil seal located in a car?

Oil seals are located at the bottom of the engine. Below is relevant information about oil seals: 1. Function of oil seals: Generally, the term oil seal refers to skeleton oil seals. The primary function of oil seals is to isolate the lubricated components in the transmission system from the output components, preventing lubricant leakage. The skeleton acts like reinforcement bars in concrete structures, providing strength and helping the oil seal maintain its shape and tension. 2. Classification: Based on structure, they can be divided into single-lip skeleton oil seals and double-lip skeleton oil seals. The secondary lip of a double-lip skeleton oil seal serves as a dust barrier, preventing external dust and debris from entering the machinery. Based on skeleton type, they can be categorized as internally wrapped skeleton oil seals, externally exposed skeleton oil seals, and assembled oil seals. Based on working conditions, they can be classified as rotary skeleton oil seals and reciprocating skeleton oil seals.
15
1
Share

Can the starter work when the ignition switch is turned to the ACC position?

When the ignition switch is turned to the ACC position, the starter cannot work. The ignition switch has four positions: 1. LOCK, which means cutting off the power and locking the steering wheel; 2. ACC, which means turning on the accessory power supply; 3. ON, which means turning on all other power supplies except the starter; 4. START, which means turning on the starter power supply to start the engine. The steps to start a car are: 1. Insert the car key into the ignition switch and turn it up one notch for self-check; 2. Press the clutch and start the vehicle, the dashboard will light up; 3. Press the clutch and shift into first gear; 4. Release the handbrake, and when the car tends to move forward, you can release the clutch and start by pressing the accelerator.
20
5
Share

Can a vehicle pass inspection with different tire tread patterns?

Tire tread patterns must be consistent to pass vehicle inspection, as mismatched tires pose safety hazards. Additional details are as follows: 1. Tire wear: Different tires not only exhibit varying wear rates but also have different traction levels with the road surface. Moreover, annual inspections have not abolished the requirement for uniform tire tread patterns. The inspection mandates that all four tires must have matching tread patterns or at least consistent patterns on the same axle (e.g., front two matching and rear two matching, but left and right sides cannot differ). 2. Driving smoothness: Inconsistent tread patterns between left and right tires can affect the vehicle's driving stability, potentially causing uneven braking or fishtailing during emergency stops, which creates driving safety risks and will result in inspection failure. Additionally, the annual inspection requires that tires must not be excessively worn, as severely worn tires also present safety hazards.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.