What does the exclamation mark on a car indicate?

1 Answers
OParker
07/29/25 1:16pm
When an exclamation mark appears on the car dashboard, there are five possible scenarios: general malfunction, automatic transmission failure, brake system issue, abnormal tire pressure, or lighting fault. Below is a detailed analysis of each situation: General Malfunction: A triangle with an exclamation mark inside indicates a general performance or component/function failure in the vehicle. Common causes include parking sensor malfunction, fuel cut-off system intervention or failure, external light failure, or engine oil pressure sensor issues. It is recommended to visit a 4S shop for inspection to identify the source of the problem. Automatic Transmission Failure: A yellow gear with an exclamation mark inside is the automatic transmission warning light, indicating a transmission fault or low transmission fluid level. The transmission fluid should be replaced promptly. Brake System Issue: A circle with parentheses and an exclamation mark in the middle signifies a brake system alert, typically due to brake system malfunction or low brake fluid level. Immediate inspection of the brake system is necessary to prevent accidents. Abnormal Tire Pressure: A horizontal line with parentheses and an exclamation mark below represents the tire pressure monitoring warning light, which illuminates when the tire pressure is too low. Check the tire pressure and adjust it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in one of the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible, or perform a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue.
Was this review help?
10
2
Share
More Forum Discussions

Should You Top Up or Replace the Coolant When It's Low?

You can top up the coolant when it's low. It's appropriate to add coolant when the level is below the standard mark, filling it up to the "MAXT" mark on the reservoir. Coolant is a special additive-containing fluid primarily used in liquid-cooled engine cooling systems. It offers excellent performance in preventing freezing in winter, boiling in summer, and resisting scale and corrosion throughout the year. Method for replacing coolant: Before completely replacing the coolant, conduct a thorough inspection to check for any leaks or cracks in the pipes, with a focus on the five-way hose. The five-way hose is named for its five connections to various parts of the engine. Coolant flows through the five-way hose and is distributed to different parts of the car to perform its function. If there are any signs of coolant leakage in this area, replace the hose or resecure the connections as needed. Drain the old coolant and then flush the channels with clean water. Add clean water to the coolant reservoir and continue filling until water flows continuously through the engine cooling system. Then, start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water draining from the reservoir may appear slightly pinkish. Continue adding clean water until the outflow is clear. Remember to remove the heater hose and drain all the water from the heater. After draining for about an hour, add the new coolant through the radiator hose to allow it to flow quickly into the radiator. Then, add another container of coolant to the reservoir until it's nearly full. Start the engine and let it run for about 10 minutes. As some air is expelled from the cooling system, the coolant level will drop slightly. Top it up again until it reaches the "MAXT" mark on the reservoir.
20
5
Share

What is the reason for the jerking of the Boyue's 6AT transmission?

Boyue's 6AT transmission jerking is caused by: excessive transmission oil temperature, stubborn dirt and impurities inside the transmission, forming blockages in the valve body, leading to poor movement of the solenoid valve, which fails to sequentially adjust the oil pressure, resulting in jerking, impact, and slipping faults. The jerking sensation in the transmission is caused by the inertia of moving parts inside the engine, and the transmission jerking can be attributed to poor shifting quality and faults. The functions of the transmission are: 1. To change the transmission ratio to meet the traction needs under different driving conditions, allowing the engine to operate under favorable conditions; 2. To enable the vehicle to reverse; 3. To interrupt power transmission, allowing the engine to start and idle, the vehicle to shift gears or park, and to interrupt power transmission to the drive wheels; 4. To achieve neutral gear, stopping power output from the transmission when the clutch is engaged.
10
1
Share

What is the reason why the Cadillac reversing camera does not display?

The reasons why the Cadillac reversing camera does not display are: 1. The reversing camera is damaged; 2. There is a problem with the display settings; 3. There is an issue with the wiring. The function of the reversing camera is to allow the driver to see the situation behind the car on the display when reversing, avoiding accidents caused by the driver not being able to see the rear situation, thus enabling safer reversing. Taking the 2021 XT6 as an example, its body dimensions are: length 5056mm, width 1964mm, height 1777mm, wheelbase 2863mm, fuel tank capacity 73L, and curb weight 2000kg. The 2021 XT6 has a MacPherson independent front suspension and a five-link independent rear suspension. It is equipped with a 2.0L turbocharged engine, with a maximum horsepower of 237PS, maximum power of 174kW, maximum torque of 350Nm, and is paired with a 9-speed automatic transmission.
4
2
Share

What is the highway fuel consumption of the Tank 300?

Tank 300's fuel consumption under test conditions measured by the Ministry of Industry and Information Technology is 9.3L/100km. Relevant information about Tank 300 is as follows: Tank 300 Introduction: Tank 300 is the first "intelligent luxury off-road SUV" under the WEY brand, built on Great Wall Motors' intelligent professional off-road platform. It combines off-road capability with luxury and comfort, creating a new category in the off-road SUV market. There are three models of Tank 300 currently available, with manufacturer's suggested retail prices ranging from 175,800 to 213,800 yuan. All models feature a 2.0T engine and an 8-speed automatic transmission. The vehicle has a boxy design, standard 2.0T engine, four-wheel drive configuration, and a curb weight of up to 2150kg. Factors affecting Tank 300's fuel consumption: Some automotive media have conducted professional tests on Tank 300's fuel consumption, covering urban expressways, congested city roads, and highway conditions. The measured fuel consumption was around 13L.
20
1
Share

Steps to Use the Audi A4L Navigation System?

The steps to use the Audi A4L navigation system are: 1. Turn on the navigation switch button, open the interface, and click the menu bar button at the bottom; 2. Open the navigation bar, and the system will enter the navigation interface; 3. Enter the destination; 4. Click the navigation button at the bottom right; 5. The navigation will automatically set an economical route to guide the driver to the destination. The Audi A4L does not come with a first aid kit; only the imported Audi A4 models are equipped with one. Taking the 2020 Audi A4L as an example, it is a mid-size car with body dimensions of: length 4858mm, width 1847mm, height 1439mm, a wheelbase of 2908mm, and a curb weight of 1610kg. The 2020 Audi A4L features a five-link independent suspension for both front and rear, and is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum torque of 270Nm, and a maximum power of 110kW, paired with a 7-speed dual-clutch transmission.
16
1
Share

What does autohold mean on a car?

Autohold in a car refers to the automatic parking system. The button for this function may be labeled as 'autohold' or feature a half-circle with the letter 'a' inside. Despite the different designs, the functionality of the button remains the same. When the autohold key is pressed while in D gear, the transmission will maintain second, third, or fourth gear. Autohold is a technological application that enables automatic handbrake functionality while the car is in motion. This technology allows drivers to avoid prolonged braking when the vehicle is stationary and prevents unnecessary sliding when the automatic electronic parking brake is engaged, making it particularly useful for uphill and downhill driving as well as frequent starts and stops. The automatic parking system is a technological application that enables automatic handbrake functionality while the car is in motion, allowing drivers to avoid prolonged braking when the vehicle is stationary and preventing unnecessary sliding when the system is activated. The autohold function provides precise parking force through a slope sensor controlled by a unit. During startup, the parking control unit calculates information from sensors such as clutch distance, clutch engagement speed, and throttle pedal. When the driving force exceeds the running resistance, the parking brake is automatically released, enabling the car to start smoothly.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.