What does the exclamation mark in a triangle mean?

1 Answers
VanWeston
07/30/25 2:55am
The exclamation mark in a triangle refers to the traction control system indicator light being illuminated. It may light up under the following circumstances: 1. The vehicle's traction control system needs to be manually turned off; 2. There is a fault in the TCS, requiring the reading of fault codes. The reasons for the appearance of the exclamation mark in a triangle include: 1. Overheating of the dry dual-clutch transmission clutch; 2. Fuel cut-off system intervention or malfunction; 3. Parking sensor failure; 4. External light failure; 5. Engine oil pressure sensor failure; 6. Traction control system warning or malfunction; 7. Brake system malfunction; 8. Low brake fluid level; 9. Low tire pressure.
Was this review help?
8
1
Share
More Forum Discussions

What Brand Does Infiniti Belong To?

Infiniti belongs to the Nissan brand. Here is an introduction to the Nissan brand: 1. Introduction: Nissan, officially known as "Nissan Motor Corporation," is a Japanese multinational automobile manufacturer listed on the Tokyo Stock Exchange. In the 2020 Fortune Global 500 ranking, Nissan was ranked 83rd. 2. Models: Its main models include the Teana, Sylphy, X-Trail, and Qashqai. 3. World Record: At the Dubai Rugby Sevens Stadium, 180 Nissan Patrol Falcon 4x4 off-road vehicles formed a giant eagle pattern, completing the challenge for the Guinness World Record for the largest synchronized car dance, breaking the previous record set by 36 Nissan NMEF vehicles.
1
3
Share

What is the best way to change transmission fluid?

Changing transmission fluid can be done more effectively by following these steps: 1. Start the engine to warm up the transmission to operating temperature; 2. Remove the drain plug; 3. After all the old fluid has drained, reinstall the drain plug; 4. Add new ATF (Automatic Transmission Fluid); 5. Start the engine and shift through P, N, D, L1, L2 gears repeatedly, pausing for at least 5 seconds in each position; 6. Check if the automatic transmission fluid level is normal. Additional information: Transmission fluid is a lubricant that keeps the gear system clean, extends the lifespan of transmission components, provides effective lubrication even in low temperatures, and reduces fluid loss under demanding operating conditions.
18
1
Share

What is KIA?

KIA is a South Korean automobile manufacturer known as Kia Motors. Here is an introduction to Kia Motors: 1. Overview: Kia was founded in 1944, initially named "Kyungsung Precision Industry," and renamed "Kia Industry" in 1952. In 2000, Kia merged with Hyundai Motor Company to form the Hyundai-Kia Automotive Group. 2. Models: Main models include the Sportage, K5, Sorento, K3, and others. 3. Brand Culture: The name Kia originates from Chinese, where "Ki" means to rise, and "A" stands for Asia. Therefore, Kia signifies "rising from the East" or "rising from Asia."
16
3
Share

What is the normal tire pressure for Lavida?

The normal tire pressure for Volkswagen Lavida is 2.4-2.5bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and reduced by 0.1bar in summer. The Volkswagen Lavida's tire pressure monitoring system is displayed on the dashboard and is enabled by default. When the tire pressure is abnormal, a tire pressure warning light will illuminate to alert the driver. There is no physical button for the tire pressure monitoring system in the vehicle. If the tire pressure monitoring indicator light comes on (a yellow symbol, an irregular circle with no stamp on top and four small spikes at the bottom, with an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure. Typically, the system will alert if the pressure is below 1.8bar or above 3.0bar. In this case, the tires need to be checked and the pressure adjusted. The tire pressure monitoring system has not been reset. After inflating the tires, if the tire pressure reset is not performed promptly, the system will still record the previous data, causing the tire pressure monitoring indicator to light up. Simply performing a tire pressure reset will resolve this issue. The tire pressure sensor is damaged. The tire pressure sensor, which monitors tire pressure, is installed directly inside the tire and connected to the tire inflation valve. If the sensor is damaged due to impact while driving, it can also trigger the tire pressure warning light. For sensor damage, the only solution is to replace it with a new component.
14
1
Share

What are the symptoms of a faulty throttle position sensor?

The symptoms of a faulty throttle position sensor include poor contact of the idle contact, no idle signal, engine stalling or unstable idle, poor contact of the no-load contact, no full-load signal input, which can result in the engine lacking high speed or experiencing acceleration difficulties. Additional information: The main causes of throttle position sensor failure are: 1. Corroded connectors, poor contact, low voltage, or no conduction, leading to engine stalling or difficulty starting. 2. Misaligned initial position, causing high or low output voltage, resulting in unstable idle speed, either too high or too low. 3. Coating failure, resistance changes causing inaccurate output voltage, leading to jerky starts and poor acceleration. 4. Excessive carbon buildup in the throttle, preventing proper closure, affecting output voltage and flow values, causing inaccurate air-fuel ratio and unstable idle speed.
5
2
Share

When Should a Carburetor Be Replaced?

Conditions requiring carburetor replacement: no idle, black smoke emission, severe failure to start, etc. More information about carburetors is as follows: 1. A carburetor is a mechanical device that mixes a certain proportion of gasoline with air under the vacuum generated by engine operation. As a precision mechanical device, the carburetor utilizes the kinetic energy of the incoming air stream to atomize gasoline. 2. A complete carburetor assembly should include starting device, idle device, medium load device, full load device, and acceleration device. The carburetor automatically adjusts the mixture concentration and outputs the corresponding amount of air-fuel mixture according to different engine operating conditions.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.