What does the EV button in the car mean?

What items should be checked before driving?

Here is an introduction to the pre-driving inspection items: 1. Check whether driving documents and license plates are complete, and verify that onboard devices, tools, and spare parts are adequately prepared. 2. Walk around the vehicle to inspect the external condition of the body and the integrity of various components, checking for any oil, water, gas, or electrical leaks. 3. Clean the windows and the exterior of the vehicle to ensure that lighting devices and license plates are clear. 4. Verify that the fuel tank's oil level, radiator coolant level, engine oil level in the crankcase, brake fluid level, and battery electrolyte level meet requirements. 5. Check the engine fan belt for signs of aging, cracking, or fraying, and ensure the tension is appropriate. 6. Inspect the tire condition and pressure. Remove any debris or small stones lodged between the tires or in the treads. Tire pressure should comply with regulations. Also, ensure the spare tire is properly secured. 7. Check the steering mechanism for flexibility and inspect the connections of the tie rods for looseness. 8. Verify the tightness of wheel hub bearings, kingpins, and nuts on tires, half-shafts, drive shafts, and leaf springs. 9. Inspect the condition of all gauges and control devices inside the cabin. Ensure lights, wipers, interior mirrors, rearview mirrors, door locks, and window cranks are functional. 10. Check the free play of the steering wheel, clutch, and brake pedal, as well as the parking brake. The free travel of the clutch and brake pedals should meet standard values. Note that the steering wheel's free rotation should not exceed 30°. 11. After starting the engine, listen for unusual noises or odors and observe whether the gauges are functioning normally. 12. Ensure the cargo bed and rear gate are secure. Loads must be properly fastened for stability and safety. For vehicles towing trailers, also inspect the connection devices for cracks, looseness, or deformation, and verify that all auxiliary facilities comply with regulations to ensure the towing device is safe and reliable.

2

5

Share

How to use the cigarette lighter in an Audi car?

Audi car cigarette lighter usage method: The cigarette lighter is located above the two cup holders. Insert the cigarette lighter into the socket and press the handle to use it. The cigarette lighter socket is an electronic device similar to a multi-socket household power outlet, which connects to the car's power supply through a plug and then provides multiple cigarette lighter ports. The Audi A4L has a body length, width, and height of 4858mm, 1847mm, and 1439mm respectively, with a wheelbase of 2908mm. The car is equipped with a 2.0T turbocharged engine, paired with a 7-speed dual-clutch transmission. This engine has a maximum power output of 110kW and a maximum torque of 270Nm.

20

0

Share

Why is there a red light flashing in the car after it is turned off and parked?

After the motor vehicle is turned off, parked, and locked, a small red light on the dashboard or the center console will illuminate, which is the anti-theft indicator light. Its illumination indicates that the vehicle has entered the locked state. If one day the anti-theft indicator light stops flashing, it means there is a fault in the car's anti-theft system. In addition, there are various types of lights on the car dashboard, including the engine fault light, oil fault light, tire pressure fault light, transmission fault light, and maintenance reminder light. When a yellow light comes on, it generally indicates a fault in the vehicle. At this time, the vehicle should be inspected and repaired based on the type of fault light. When the following issues occur in the car, it is advisable to promptly visit a repair shop for professional inspection and maintenance to eliminate potential safety hazards during driving. Reasons for the engine fault light to illuminate: including engine overheating, engine misfire, engine knocking, severe engine carbon buildup, poor fuel quality, etc. Oil fault light: insufficient oil level, engine overheating, or damage/wear to oil pump components. Transmission fault light: transmission oil is too dirty or the transmission is overheating. Tire pressure fault light: tire pressure is too high or too low, tire damage, or tire pressure sensor fault. Maintenance reminder light: the car requires maintenance and repair.

16

1

Share

Where is the assembly of the cigarette lighter in the Sylphy?

The assembly of the cigarette lighter in the Sylphy is located inside the front center storage compartment. The function of the cigarette lighter is to provide a fire source for the convenience of the owner when smoking. Precautions for using the cigarette lighter: 1. Try to start the vehicle when using the cigarette lighter for a long time; 2. Plug and unplug the cigarette lighter plug reasonably; 3. Unplug external devices in time after parking; 4. Clean the heating wire of the cigarette lighter head frequently; 5. Avoid foreign objects entering the cigarette lighter hole. The length, width, and height of the Sylphy body are 4631mm, 1760mm, and 1503mm respectively, with a wheelbase of 2700mm. The driving method of the car is front-wheel drive, and the maximum power of the engine is 90kw, with a maximum torque of 155nm.

18

3

Share

Is the engine hood replaced at a 4S store original?

4S stores replace engine hoods with original parts, as all their components are sourced directly from the manufacturer, and no aftermarket parts are used. The engine hood covers critical components of the vehicle, including the engine, electrical circuits, fuel system, braking system, and transmission system, making it vital for the vehicle's operation. By enhancing the strength and construction of the engine hood, it effectively prevents adverse effects such as impacts, corrosion, rainwater, and electrical interference, ensuring the vehicle's normal operation. Functions of the engine hood: 1. The shape of the engine hood can effectively adjust the direction and form of reflected light, reducing the impact of light on the driver; 2. The engine hood can effectively block injuries caused by explosions, acting as a protective shield to prevent air and flame spread, thereby reducing the risk and damage of fire; 3. In special vehicles, high-strength engine hoods are used as work platforms to provide support.

16

2

Share

How to Adjust the Rearview Mirrors for Reversing into the Garage in Subject 2?

Methods for adjusting the rearview mirrors for reversing into the garage in Subject 2: 1. Central rearview mirror: Adjust the mirror so that the left edge of the mirror surface can see your right ear, and the upper and lower positions should place the distant horizon in the center of the mirror. Position the distant horizontal line at the midline of the central rearview mirror, then adjust left and right to place the image of your right ear just on the left side of the mirror. 2. Left side mirror: The car body should occupy one-fourth of the mirror surface, and the distant horizon should also be placed in the center of the mirror. 3. Right side mirror: Place the horizontal line at two-thirds of the rearview mirror, then adjust the edge of the car body to occupy one-fourth of the mirror image.

16

2

Share

What does the EV button in the car mean?

What items should be checked before driving?

How to use the cigarette lighter in an Audi car?

Why is there a red light flashing in the car after it is turned off and parked?

Where is the assembly of the cigarette lighter in the Sylphy?

Is the engine hood replaced at a 4S store original?

How to Adjust the Rearview Mirrors for Reversing into the Garage in Subject 2?

Why Shouldn't You Park Under Trees?

Why does the vehicle not adjacent to the mountain side have the right of way on narrow mountain roads?

Why does the alarm still go off when the tire pressure is sufficient?

How to open the trunk of the Toyota Prado?