···
Log in / Register

What does the Envision StabiliTrak maintenance mean?

3 Answers
StHeidi
08/26/25 3:35am
Envision StabiliTrak maintenance refers to an ESP fault, which is a fault in the vehicle stability system. Related introduction: 1. Principle of StabiliTrak: The stability tracking control system is similar to the VSC vehicle stability control, focusing on the tracking control during turns in conjunction with ABS and TCS. Its control principle is similar to VSC, but the method of controlling each wheel is slightly different. 2. Basic design concept of StabiliTrak: It mainly uses the steering wheel angle sensor, body yaw sensor, lateral acceleration sensor, and wheel speed sensor to predict whether the driver's intended operation matches the vehicle's expected behavior at a certain speed.
Was this review help?
20
1
Share
IsabelAnn
09/08/25 4:16am
I noticed that when the Envision displays the 'Stabilitrak Service' message, it usually indicates an issue with the electronic stability control system. This system prevents wheel slippage or rollover, playing a crucial role in situations like rainy weather or sharp turns. The 'Service' prompt means the system needs inspection or repair. Common causes include dirty or faulty wheel speed sensors, and sometimes poor wiring connections. Last time my car had this warning light, I tried cleaning the sensors myself, but it didn't resolve the issue, so I had to visit a repair shop and spent about six to seven hundred yuan replacing the part. I recommend not delaying repairs too long, as system failure could lead to accidents, especially during high-speed driving. Keeping the wheel hubs clean can reduce the likelihood of faults, and regular maintenance is key.
Was this review help?
4
1
Share
Expand All
GabrielaMarie
10/22/25 4:20am
Stabilitrak maintenance means your Buick Envision's stability control system needs repair. This system keeps your driving stable, like preventing loss of control during hard braking or sharp turns. Common faults are sensor issues, possibly from damaged wheel speed or ABS-related components triggering the warning light. I've seen professionals diagnose it—just reading the fault codes pinpoints the problem. DIY fixes aren't safe; trust a certified shop. Repair costs vary: minor issues cost a few hundred yuan, major ones over a thousand, but safety is priceless. If the system fails while driving, slow down immediately, pull over, and turn on hazard lights.
Was this review help?
12
3
Share
Expand All
More Forum Discussions

Will restarting the engine after driving through water cause damage?

Restarting the engine after driving through water can cause damage. If the car stalls after driving through water and water enters the engine, forcibly restarting the engine can lead to bending of the engine connecting rods. Bent connecting rods can damage the engine block and crankshaft, causing significant harm to the engine, and in severe cases, may result in the engine being scrapped. Below is more information about driving through water: Reasons for stalling when driving through water: The high-voltage ignition system may become damp or short-circuited due to water ingress, causing the engine to stall. This is a common occurrence, usually caused by splashing water. Water entering the exhaust pipe can also cause stalling, as the exhaust pipe is positioned low, and if the water level rises above it, the engine cannot expel exhaust gases and stalls. What to do if the car stalls after driving through water: Do not attempt to restart the engine if the car stalls after driving through water, as this can cause severe damage or even total engine failure. Stay calm, turn off the ignition immediately, and avoid trying to start the engine. The car should be towed to a repair shop promptly to prevent further damage. After driving through water, it's advisable to check the engine compartment, air intake, wheels, brake discs, exhaust pipe, and carbon canister for any debris that might affect driving safety.
19
1
Share

Will spraying alcohol in the car cause a fire?

Spraying alcohol in the car can cause a fire, but the probability is very low. The ignition point of alcohol is only 20 degrees Celsius. If the temperature inside the car is too high, it may cause combustion. Therefore, it is best not to leave alcohol in the car. If disinfection is needed, you can find an open area to wipe the interior with alcohol and ensure proper ventilation inside the car for a period of time. Here are items that should not be left in the car: Flammable and explosive items: Never leave them in the trunk, such as lighters, fireworks, etc. If the car body temperature rises too high or comes into contact with an ignition source, the consequences can be severe. If caught by traffic police, you may also face fines and penalty points. Perfume: Perfume is chemically processed under specific conditions. In high temperatures, these chemical substances can easily volatilize and may even harm the human body. Additionally, direct sunlight can cause explosions. Reading glasses: Reading glasses are convex lenses that can focus light. Prolonged focusing of light can lead to excessively high temperatures at the focal point, potentially damaging the car's plastic trim and even causing the vehicle to self-ignite.
3
4
Share

What is the reason for the Sonata 9 not moving when shifted into reverse gear?

Sonata 9 not moving when shifted into reverse gear is due to a faulty gear position sensor. Below is an introduction to the gear position sensor: 1. Working Principle: The gear position sensor, also known as the gear switch sensor, is used to detect gear signals. The gear position sensor has multiple contacts. When the car shifts gears, the contacts move to the corresponding gear position, changing the voltage value. The gear position sensor detects the gear shift signal and transmits it to the transmission computer, thereby controlling the corresponding actuators to operate. 2. Symptoms of Failure: When the gear position sensor fails, the car's dashboard may not display the correct gear position, the vehicle may fail to start, the car may not shift gears normally with jerky upshifts and downshifts, and the car may also experience weak acceleration accompanied by shaking.
8
0
Share

How to Use the S Gear in Volkswagen?

Volkswagen's S gear is used by simply pushing the gear lever to the S position. The S gear refers to the car's sport mode, which means high RPM, high torque, and low power. During acceleration, the car relies on high torque. After engaging the sport mode, the engine's RPM increases, and the torque also increases, thereby enhancing the car's acceleration. Taking the 2021 Volkswagen T-Roc as an example, it is a compact SUV with the following dimensions: length 4318mm, width 1819mm, height 1582mm, wheelbase 2680mm, fuel tank capacity 51L, and curb weight 1385kg.
9
0
Share

Which Volkswagen models have a rear flip emblem?

Volkswagen models such as the Volkswagen Magotan, Volkswagen CC, Volkswagen Golf, and Volkswagen Beetle feature a rear flip emblem. Relevant information about Volkswagen's brand culture is as follows: 1. Brand Logo: Volkswagen (German: Volks-Wagenwerk), meaning 'the people's car,' has undergone several changes in its logo history. The VW in the logo stands for the first letters of its full name. The logo resembles three 'V's formed by the middle and index fingers, symbolizing the company and its products' victory. 2. Brand Groups: The group's passenger car business is divided into two major brands. Under the group, Audi and Volkswagen independently manage their brand groups and are responsible for generating profits. Each brand has its own logo, operates autonomously, and offers a range of products from ultra-economy compact cars (with a fuel consumption rate of only 3 liters/100 km) to luxury sedans. The Volkswagen brand group includes 8 brands: Volkswagen Commercial Vehicles, Volkswagen Passenger Cars, ŠKODA, Bentley, Bugatti, Porsche, Scania, and MAN.
7
1
Share

What is the Principle of Toyota Hybrid Technology?

Toyota hybrid technology principle is based on electric energy as the power source. Here are the specific details: 1. Hybrid technology aspect: The car's electric motor directly drives the wheels, while the equipped gasoline engine is used to generate electricity, which can be stored in the battery. On the basis of internal combustion engine cars, batteries and electric motors are added. The engine can drive the wheels, and the electric motor can also drive the wheels. When the electric motor is not driving the wheels, it can recover kinetic energy to charge the battery. 2. Advantages: The hybrid system features a series-parallel configuration. In pure electric mode, it offers the quietness and low cost of an electric vehicle; in range-extending mode, there is no range anxiety, the engine operates at optimal speed with low fuel consumption, minimal noise, and reduced vibration; in parallel mode, the two motors provide excellent starting and acceleration performance.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.